Dear customer!Congratulations on your purchase of the TM Canyon device. It is recommended that the user read this manual entirely in order to make full use of the product. For more information about Canyon products, please visit our web-site: http://canyon.eu
Owner’s manual. Power bank (hereinafter referred to as PB)
Specifications
Capacity: 10000 mAh
Output: DC 5V/ max 2.1A
Input: DC 5V/2.1A
Battery-power LED indicators
Package
Power bank
3-in-1 cable
Owner’s manual
LED indicators
Battery-power LED indicators will turn on by pressing lightly the power button.
Power bank charging
Connect the compatible USB charger (purchased separately) to the wall outlet/ computer. Connect the micro-USB connector to PB charger connector. The light indicators will turn on and the LED indicator will blink throughout the battery charging process, indicating its stage. When the battery is fully charged, all the indicators will turn on.
When the battery is fully charged, firstly disconnect the compatible charger from the PB, and then remove it from the power outlet. Hold the plug, but not the cord when disconnecting the charger.
USB device charging
Connect your device to PB using the cable that comes with the power bank or your mobile phone/ tablet.
Press ON/OFF button once.
The illuminated LED indicator on PB indicates the charging process. As the external battery is discharged, more indicators will turn off on it. When your device is fully charged, the battery will turn off.
SAFETY INSTRUCTIONS
Read and follow all the instructions before using the product:
Do not expose PB to excessive moisture, water or dust. Do not install in locations with high moisture or dust.
Protect the device from heat: do not install it near heaters and do not expose it to direct sunlight.
The product is to be connected to power supply of the type specified in the owner’s manual only. 4) Clean the device only with dry cloth.
WARNING
Do not disassemble the enclosure. The battery may explode when damaged. It is not recommended to attempt to repair the device yourself, which will result in the loss of warranty.
The power bank must be stored in location with temperature ranging between 15 to 25 °C for optimal performance. Too high/low temperature results in the loss of capacity and shorter lifetime of the battery. A device with an excessively heated or cooled battery may not work temporarily.
Do not dispose of batteries in a fire as they may explode.
Disposal: Bring the used electronic products, batteries and packaging to the recycling collection points.
WARRANTY RESPONSIBILITY
The warranty period starts from the date of purchase of the product from the authorized Canyon distributor. The date of purchase is specified on your sales receipt or delivery note. Repair, replacement or refunds within the period of warranty are made at the discretion of Canyon. To obtain warranty service the product is to be returned to the distributor at the place of purchase together with a proof of purchase (sales receipt or delivery note). This product shall be covered by warranty of 1 year from the date of purchase. The lifespan is one year. The further information regarding the use and warranty terms is available on the site: http://canyon.eu/warranty-terms/
Troubleshooting
Issue
Solution
The power bank does not charge
Adhere to the sequence of connections when connecting to the power supply (for charging).
Make sure that the power bank contacts fit tightly with the charger contacts and that they are not dirty.
Replace the cable.
If the above-listed measures do not help to resolve the problem, please contact the support service on the Canyon website: http://canyon.eu/ask-yourquestion/.
Note: Any power bank will not deliver full-declared capacity to your device some of this energy is lost through heat generated and voltage conversion. Please, check the specification of your phone or tablet’s battery to estimate how many full charges you can expect. If not stated otherwise expect to achieve around 70% of efficiency.