CANYON Wired optical mouse User Guide

CANYON Wired optical mouseUser Guide

Mosel: CNE-CMS1

1. Package

Figure 1

Package contents (Figure 1): Wired optical mouse; User manual

2. Connection

For correct operation of the device, connect it to the USB port of a personal computer / laptop / all-in-one.

After turning on the computer and installing the operating system standard drivers – the  mouse will be ready for use.

SAFETY INSTRUCTIONS

Read carefully and follow all instructions before using this product.

  1. Do not expose the mouse to excessive moisture, water or dust. Do not install in rooms with high humidity and dust level.
  2. Do not expose the mouse to heat: do not place it close to heating appliances, and do not expose it to direct sun rays.
  3. The product shall be connected to the power supply source of the type indicated in the operation manual only.
  4. Clean the device with dry cloth only.

Warning

  1. It is forbidden to dismantle the device. Attempt to repair this device isnot recommended and leads to cancellation of the warranty.
  2. For optimum performance the device with batteries shall be kept at thetemperature 15 to 25 °С. Too high / low temperature leads to reductionin capacity and service life of the battery. Excessive heating/cooling maycause temporary non-operability of the device.
  3. Do not destroy batteries by burning, they may explode.

Warranty

The warranty period starts from the day of the product purchase from Canyon authorized Seller. The date of purchase is the date specified on your sales receipt or on the invoice. During the warranty period, repair, replacement or refund for the purchase shall be performed at the discretion of Canyon. In order to obtain warranty service, the goods must be returned to the Seller at the place of purchase together with proof of purchase (receipt or bill of landing). 2 years warranty from the date of purchase by the consumer. The service life is 2 years.Additional information about the use and warranty is available at  https://canyon.eu/warranty-terms/

Troubleshooting

Problem: Mouse does not workSolution:

  1. Make sure the USB cable is plugged into the USB port.
  2. Try using the mouse on another USB port or another computer.

If the actions from the above list do not contribute to problem solving, please contact the support team at Canyon http://canyon.eu/ask-your-question/

Manufacturer: Asbisc Enterprises PLC,43, Kolonakiou Street, Diamond Court 4103Ayios Athanasioshttp://canyon.eu

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by