Caterlite CS939 Portable Sous Vide Machine Instruction Manual

Portable SousVideInstruction manual

Model • Modèle • Modell • Modello • Modelo • Malli: CS939

CS939_ML_A5_v2_20201103.indb 1

Safety Tips

• Position on a flat, stable surface.
• A service agent/qualifiedtechnician should carry out installation and any repairs if required. Do not remove any components on this product.
• Consult Local and National Standards to comply with the following:– Health and Safety at Work Legislation– BS EN Codes of Practice– Fire Precautions– IEE Wiring Regulations– Building Regulations
• DO NOT immerse the appliance in water above the MAX fill line, or use jet/ pressure washers to clean the appliance.
• Do not immerse the appliance below the MIN Fill line.
• Do not use the appliance for anything other than its intended use.
• Always switch off and disconnect the power supply to the appliance when not in use.
• Not suitable for outdoor use.
• Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a Caterlite agent or a recommended qualified technician in orderto avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The appliance is not intended to be operated by means of an external timer or separate remote-control system.
• DO NOT use if damaged.
• DO NOT touch the outer surfaces of the appliance. They become hot during use.
• Caterlite recommends that this appliance should be periodically tested (at least annually) by a Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity, and Functional Testing.
• Caterlite recommends that this product be connected to a circuit protected by an appropriate RCD (Residual Current Device).

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your Caterlite product.

Pack Contents

The following is included:• Catrelite Portable Sous Vide• Instruction manualCaterlite prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your Caterlite dealer immediately. FunctionControl panel

Operation

1. Choose a suitable water container. The container should be suitable for food use, resistant to temperatures of 100°C, and have a depth of at least 11cm.
2. Fit the appliance securely to your watercontainer using the fixing clamp.
3. Add water to the container.Note: The water level (after the food is put in) should be between the MIN and MAX marks on the machine.
4. Connect to the mains power supply. All the indicators light up for 1 second then go out with the key only lighting up. The appliance is now on Standby.
5. Press the key to enter temperature setting mode. The actual temperature display lights up. Meanwhile, the default working temperature “50.0” flashes on the setting temperature/time display, and the key also flashes.
6.  Press the “+” or “-” key to set the temperature (from 0°C to 95°C). Press and hold either key for a fast setting.
7.  If desired, press and hold key to switch between °C and °F.
8. Now press the key to enter time setting mode. The actual temperature display lights up. Meanwhile, the default working time “3:00” flashes on the setting temperature/time display, and the key also flashes.
9. Press “+” or “-” to set the time (from 00:00 to 99:59). Press and hold either key for a fast setting.
10. After setting temperature and time, press to start heating.• If needed, you can press and hold for 2 seconds to stop heating and enter Standby.
11. When the water reaches the set temperature, the appliance beeps once and the timer starts to count down.
12. Place the food to be cooked into the container.Note: Before Sous Vide cooking,
13.  When the set time has expired, the appliance will beep 3 times then enter Standby.
14. Unplug the appliance and let it cool sufficiently.

Cleaning, Care & Maintenance

• Unplug the appliance and allow it to cool before any cleaning and maintenance.
• Wipe the exterior surface with a damp cloth. Remove any loose debris if necessary.
• Let it dry well. Cleaning the interior components Should the immersed parts become greasy and thus need thorough cleaning:

1. Fit the appliance to the container. Then fill the container with water up to the MAX marking on the unit.
2. Plugin the appliance and set the temperature to 65°C.
3. Add appropriate amount of dishwasher detergent (ratio: 2 g detergent to 1 Litre water).
4. Allow the solution to circulate for 10 minutes after 65°C is reached.
5. Turn off and unplug the appliance.
6. Clean the appliance and container with fresh water thoroughly, then dry and store in a well-ventilated place.

Maintenance

•  Ensure to locate the unit vertically after cleaning.
• During cleaning, do not damage the interior components. Should any damage occur, call the Caterlite agent or qualified technician. Do not attempt any unauthorized repairs to avoid accidents.
• Always use fresh water. If the water is reused many times, mineral substances may adhere to the surface of the components, thus influencing the appliance’s performance.
• For use, do not place hot appliances in cool water or vice versa. Let it cool down to room temperature then lower into cool water for use. Otherwise, the function and lifetime will be affected.

De-scaling

Troubleshooting

Technical Specifications

Electrical Wiring

This appliance is supplied with a 3 pin BS1363 plug and lead. The plug is to be connected to a suitable mains socket. This appliance is wired as follows:

• Live wire (coloured brown) to the terminal marked L
• Neutral wire (coloured blue) to the terminal marked N
• Earth wire (coloured green/yellow) to terminal marked EThis appliance must be earthed. If in doubt consult a qualified electrician. Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required, they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved andenvironmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.Caterlite parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.Caterlite products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,mechanical, photocopying, recording or otherwise, without the prior written permission of Caterlite.Every effort is made to ensure all details are correct at the time of going to press, however, Caterlite reserve the right tochange specifications without notice.

report this ad

CS939_ML_A5_v2_20201103