PROsmart signal repeater
CEL-FI PRO TELSTRA
locked to Telstra network
PRO TELSTRAIncludes:
- CEL-FI GO PRO Repeater
- 240V Power Supply
How do I set up CEL-FI PRO?Setup in 4 easy steps.
Step 1Find the best cellular signalUse your phone to find the best cellular signal. Typically you will get the best signal near a window.
Step 2Place the Network UnitPlace the Network Unit (NU) in the location where you get the best cellular signal.
Step 3Place the Coverage UnitPlace the Coverage Unit (CU) in the location where you need improved coverage.
Step 4Use the app to optimize setupUsing the Cel-Fi WAVE app, finish setup and activation.
Provides Indoor Mobile CoverageAll you need is somewhere in your home or office that gets at least 1 bar of 3G or 4G signal to enable the Cel-Fi PRO to provide indoor coverage.THE PRO SERIES repeater is perfect for those who have a minimum of 1 bar of coverage within their home or office.General Guide: If you have 1 bar on your phone the CEL-FI PRO requires an antenna, but if two bars on your phone, no antenna is required.
Ideal for CBD or Urban area applications.
Improve your mobile coverage
Simply plug it in to boost indoor cellular coverageCel-Fi PRO improves 3G, 4G, and LTE cellular service by eliminating dead zones and dropped calls. With 100 dB of gain, the PRO will not only improve cellular service across four (4) concurrent bands, it will also reduce your cell phone’s power requirements and extend its battery life. Cel-Fi PRO covers up to 13,000 ft2 (1,200 m2) of indoor space per system. The system features an LCD color interface, is fully self-contained and self-configuring, and requires no external antennas or wiring. Simply plug it in to boost indoor cellular coverage.
Cel-Fi PRO is CE and FCC approved. It has been approved by numerous mobile operators and regulatory bodies and is shipping globally.
Cel-Fi PRO EXA variants feature an external antenna connector. An external Donor antenna can therefore acquire an outside signal, allowing it to be used in applications where no indoor signal is present (i.e. cement, metal walls, etc.). This enables cellular coverage in hard-to-reach places by allowing the Network Unit to be placed where no service exists. This opens up new opportunities for using Cel-Fi PRO when other solutions fail.
Move the CU further away from the NU to maximize coverage.
The total coverage area equals twice the distance between the NU and the CU. The maximum distance is up to 100 dB path loss.
Sample Layouts
References
[xyz-ips snippet=”download-snippet”]