Champion 9500W Electric Start Generator Instruction Manual

Champion 9500W Electric Start Generator

www.championpowerequipment.com© Champion Power Equipment 2020.All Rights Reserved. / Tous droits réservés.

Set-Up

1. Open shipping carton. Assembly > Unpacking

 

 

 

 

2. Attach wheel kit.  Assembly > Install the Wheel Kit

 

3. Connect the battery.  Assembly > Connect the Battery.Cut cable tie on each side of the battery connector.Push two halves of the battery connector together tightly.

 

 

 

4. Add oil.  Assembly > Add Engine Oil.

Recommended: 5W-30, up to 40.6 fl. oz. (1200 ml) DO NOT overfill.

 

 

 

 

5. Move the generator outdoors. 

Move generator to an open, outdoor area. Point exhaust away. Never run a generator in enclosed areas (e.g., not in-house or garage).

Keep all objects at least 5 feet (1.5 m) from the generator. The heat from the muffler and exhaust gas can ignite combustible materials.

6. Add fuel. Assembly > Add FuelDO NOT use E15 or E85.

 

 

 

 

7. DO NOT plug in any electrical devices.

 

 

8. Turn the fuel valve “ON”.

 

 

 

 

 

9a. Electric Start

1.  Move the choke lever to the “CHOKE” position.
2.  Press and hold the ignition switch to the “START” position.
3.  Move the choke lever to the “RUN” position.

 

 

 

 

 

9b. Manual Start

1.  Push the ignition switch to the “ON” position.
2.  Move the choke lever to the “CHOKE” position.
3.  Pull the starter cord.
4.  Move the choke lever to the “RUN” position.

 

 

 

 

10. Plug in. Operation > Connecting Electrical Loads.

 

 

 

 

 

 

Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!

 

 

 

 

NEED ASSISTANCE OR HAVE A QUESTION? GIVE US A CALL.1·877·338·0999CHAMPIONPOWEREQUIPMENT.COM

References

• 
  Champion Power Equipment
• 
  Champion Power Equipment