CHAUVET Professional Ovation E-160WW Warm White LED Fixture User Guide

Table of Contents

Ovation E-160WW Warm White LED Fixture

Quick Reference Guide

QUICK REFERENCE GUIDE

About This GuideThe Ovation E-160WW Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

DisclaimerThe information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTYFOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE. For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

DO NOT open this product. It contains no user-serviceable parts.
DO NOT look at the light source when the product is on.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect theproduct from power via breaker or by unplugging it.
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humidballroom) condensation may form on the internal electronics of the product.
To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
CAUTION: This product’s housing may be hot when lights are operating.
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
USE a safety cable when mounting this product overhead.
DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it. (IP20)
DO NOT operate this product if the housing, lenses, or cables appear damaged.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
In the event of a serious operating problem, stop using immediately.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Contact

Outside the US, United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a product. Refer to Contact Us at the end of this QRG for contact information.

What is Included

Ovation E-160WW
Neutrik® powerCON® power cord
Quick Reference Guide

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100240 VAC, 50/60 Hz.

Power Linking

You can link up to 15 Ovation E-160WW products at 120 V, 26 products at 208 V, or 28 products at 230 V. Never exceed this number. Power linking cords can be purchased separately.

Ovation E-160WW QRG Rev. 6

QUICK REFERENCE GUIDE

AC PlugConnection AC LiveAC Neutral AC Ground

Wire (U.S.) Black WhiteGreen/Yellow

Wire (Europe) Brown BlueGreen/Yellow

Screw Color Yellow/BrassSilver Green

To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Replacing The Fuse

Disconnect this product from power
Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
Remove blown fuse and replace with a good fuse of the same type and rating.
Screw the fuse holder cap back in place and reconnect power.

DMX LinkingThe Ovation E-160WW will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is available from www.chauvetprofessional.com.DMX ConnectionThe Ovation E-160WW uses a 3- or 5-pin DMX data connection for its 2 DMX personalities. See the User Manual for information about connecting and configuring the product for DMX operation.RDM (Remote Device Management)Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers have this capability. The Ovation E-160WW supports RDM protocol that allows feedback to make changes to menu map options. Download the User Manual from www.chauvetprofessional.com for more details.MountingBefore mounting this product, read the Safety Notes. Use at least one mounting point per product. Make sure the mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps/Product Mounting Diagram

Lens TubesThe following lens tubes are available for purchase:

19°, 26°, 36°, and 50° w/Gel frame (6.25 in/159 mm accessories)
14°, 15°30° and 25°50° Zoom Gel frame (7.5 in/191 mm accessories)

Control Panel Description

Button	Function
“}\’><MENU>	Exits from the current menu or function
“}\’><ENTER>	Enables the currently displayed menu or sets the currently selected value into the selected function
“}\’><UP>	Navigates upwards through the menu list or increases the numeric value when in a function
“}\’><DOWN>	Navigates downwards through the menu list or decreases the numeric value when in a function

Menu Map

Main Level	rogramming Levels	Description
DMX Address	001-512	Selects DMX address (highest channel restricted to personality chosen).
DMX Channel	1 Ch	1-channel: dimmer
2 Ch	2-channel: 16-bit dimmer
3 Ch	3-channel: 16-bit dimmer, strobe
6 Ch	6-channel: 16-bit dimmer, strobe, auto programs, auto speed, dimmer mode
Static	Dimmer	0-255	Sets the intensity of the light output
Strobe	Sets the strobe rate
Auto Show	Auto 1	1-100	Selects automatic programs and speed
Auto 2
Auto 3
Auto 4
Master/Slave Mode	Master	Master mode
Slave	DMX slave mode
Dimmer Curve	Linear	Sets the dimmer curve
Square
I Square
SCurve
Dimmer Mode	Off	Linear dimming
Dimmer 13	Dimming curves: Dimmer 1 (fast) to Dimmer 3 (slow)
LED Frequency	600Hz	PWM frequency
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Fan Mode	Auto	Sets the fan to auto mode
On	Sets the fan to always on
Off	Sets the fan to always off
Silent	Sets the fan to silent
Back Light	10S	Turns off display backlight after 10 seconds of inactivity Turns off
30S	display backlight after 30 seconds of inactivity
2Min	Turns off display backlight after 2 minutes of inactivity
Always On	Display backlight always on
Information	Fixture Hours	_ _ _ _H	Shows total product hours
Version	V_._	Shows installed software version
UID	_ _ _ _ _ _ _ _ _ _ _ _	Shows product ID