Classic Mosquito Net CLDMT-GR-200X100 Magnetic Screen Door User Guide
Clean the door and make sure its dryWait for few seconds until door frame is dryMeasure the center of top door frame & mark with pensil/chalk
Place the screen on the floor.Cut roll of velcro into equal length with top & 2 side of screen door
Attached the velcro strips to top & each side of screen door without removing white tape
Peel off the white backing paper from top side of screen onlyDo not remove backing paper from side at this step.
Hold the center of screen door to the center of the door frame & make sure there is no room under the bottom screen but high enough not to drag on the ground. And then stick screen, starting from top center, slightly higher than top side and working outward.
Check & make sure the screen open & closes without gaps.Make adjustments if necessary.For an extra support , you can use the provided nails on wooden door frame.
Notes–The Central part of the screen door should be slightly higher than the two side in order to be balanced. Pres the adhesive tape until secure & don’t move the curtain for at least 24 hours. Since the product is made from polyester fiber and could have characteristic, smell, please allow mesh to air-dry before use.
[xyz-ips snippet=”download-snippet”]