Cleanmaxx Dust Mite Vacuum Cleaner Instruction Manual

02243 / 07856

Explanation of the Symbols

Danger symbols: These symbols indicate risks of injury. Read through the associated safety notices carefully and follow them. Supplementary information Read operating instructions before use! Protection class IIExplanation of the Signal WordsDANGER –  warns of serious injuries and danger to lifeWARNING – warns of possible serious injuries and danger to lifeCAUTION – warns of slight to moderate injuriesNOTICE – warns of damage to property

Dear Customer,We are delighted that you have chosen this dust mite vacuum cleaner.Before using the device for the fi rst time, please read the operating instructions carefully and keep them for future reference. If the device is given to someone else, these operating instructions should also be handed over with it. They form an integral part of the device.The manufacturer and importer do not accept any liability if the information in these operating instructions is not complied with.If you have any questions about the device and about spare parts/ accessories, contact the customer service department via our website: www.dspro.de/kundenservice

Intended Use

  • This device is intended to be used to kill off bacteria and remove dust, germs and domestic dust mites. It is suitable for use on mattresses, bed sheets, bed  covers, upholstered furniture and similar items. On no account should the device be used to suck up the following:– liquids or wet substances (e. g. wet carpet shampoo)– glowing ash, cigarette ends, matches, etc.– infl ammable or explosive substances– very fi ne dust (e. g. concrete dust), ash or toner– pointed, hard objects such as large pieces of broken glass
  • The device is for personal use only and is not intended for commercial applications.
  • The device should only be used as described in these operating instructions. Any other use is deemed to be improper.
  • The following are excluded from the warranty: all defects caused by improper handling, damage or unauthorised attempts at repair. This also applies to normal wear and tear.

Safety Instructions

WARNING: Note all safety notices, instructions, illustrations and technical data provided with this device.Failure to follow the safety notices and instructions may result in electric shock, fi re and / or injuries.

  • This device must not be used by children. The device and the mains cable are to be kept away from children.
  • This device may be used by people with reduced physical, sensory or mental abilities or a lack of experience and / or knowledge if they are supervised or have  received instruction on how to use the device safely and have understood the dangers resulting from this. Children must not play with the device.
  • The device must always be disconnected from the mains power when it is left unattended and before assembling, disassembling or cleaning the device.
  • Never immerse the device or the connection in water or other liquids and ensure that they cannot fall into water or become wet.
  • In the interest of your own safety, you should inspect the device for damage each time before you use it. The device may only be used if it has no visible signs  of damage! If the device or the connection of the device is damaged, it must be replaced by the manufacturer, customer service department or a similarly qualifi  ed person (e. g. specialist workshop) in order to avoid any hazards.

DANGER – Danger of Electric Shock!

  • Use and store only in closed rooms.
  • Do not use the device in rooms with high humidity.
  • Should the device fall into water, switch off the power supply immediately. Do not attempt to pull the device out of the water while it is still connected to the mains power!
  • Never touch the device or the connection with wet hands when these components are connected to the mains power.
  • Never suck up liquids. Do not pour liquids into the dust container. Keep the motor unit away from moisture or wet conditions!

WARNING – Danger of Injury!Danger of damage to the eyes and skin!

  • Germicidal ultraviolet rays are harmful to the eyes and skin. Never expose yourself or other people and animals to direct or refl ected rays! If you come into contact with the rays, consult a doctor immediately.
  • Make sure that the safety switches of the UV-C lamp are not blocked!
  • Danger of suff ocation! Keep children and animals away from the packaging material.
  • Danger of strangulation! Make sure that the mains cable is always kept out of the reach of small children and animals.
  • Danger of becoming stuck! Keep animals, hair, jewellery, wide clothing, fi ngers and all other body parts away from the suction opening of the device. They  could become stuck to the device. Should the vacuum become stuck, switch the device off immediately.
  • Do not touch the vibration head during operation.
  • Danger of tripping! Make sure that the connected mains cable does not present a trip hazard.

WARNING – Danger of Fire!

  • Do not use the device in rooms containing easily ignitable substances or poisonous and explosive fumes.
  • Do not cover the device during operation in order to prevent it from catching fi re. Do not insert anything into the openings of the device and make sure that  these and the ventilation slots at the sides do not become clogged or covered up.

NOTICE – Risk of Damage to Material and Property

  • Only connect the device to a socket that is properly installed and matches the technical data of the device. The socket must also be readily accessible after  connection so that the connection to the mains can quickly be isolated.
  • Make sure that the connection not squashed, bent or laid over sharp edges and does not come into contact with hot surfaces. Do not wrap the connection  around the device (danger of the cable breaking).
  • Switch off the device and pull the mains plug out of the plug socket:– in the event of a thunderstorm,– in the event of damage / faults (e. g. unusual noises, odour or smoke development)– if liquids have been sucked up,– if the device has been dropped.Have the device checked by an expert before it is used again.
  • The device must be switched off when inserting or removing the mains plug.
  • Never pull or carry the device by the mains cable. Always pull the mains plug and never the mains cable to disconnect the device from the mains power.
  • Protect the device from heat, naked fl ames, sub-zero temperatures, persistent moisture, wet conditions and impacts.
  • Do not try to lubricate the rollers with lubricant or oil. This would cause dust and dirt to increasingly adhere to the rollers.
  • Use only original spare parts from the manufacturer in order to guarantee that there is no interference that may prevent the device from working and to avoid damage.
  • Do not place or lay any heavy objects on the device or the connection.

Items Supplied

• Motor unit• Dust container• Dust fi lter• HEPA fi lter• UV-C lamp• Operating instructionsCheck the items supplied for completeness and any transport damage. If you fi nd any damage to the components, do not use them, but contact our customer service department.Possible dirt residues in the dust container can be attributed to quality checks and do not constitute a defect with the device.

Device Overview

  1. On / Off switch
  2. Ventilation slot
  3. Motor unit
  4. Viewing window
  5. Dust container with fi lter system
  6. Handle
  7. Rollers
  8. Safety switch, left
  9. Vibration head
  10. UV-C lamp (under the cover)
  11. UV-C lamp cover
  12. Safety switch, right
  13. Suction opening
  14. Vibration button (under the handle)
  15. Dust fi lter
  16. HEPA fi lter

Safety Devices

The device has two safety switches (8, 12). The UV-C lamp (10) only switches on if both safety switches are pressed into the motor unit (3) (automatic switch-off  function of the UV-C lamp deactivated). This happens automatically when the device is placed on a fl at surface. If the safety switches lose contact with the  surface below, the automatic switchoff function is activated and the UV-C lamp stops being lit.

Tips and Notes

  • Always clean mattresses on both sides.
  • We recommend cleaning new mattresses once a month. Older mattresses should initially be cleaned every day for a week. We then recommend cleaning them once a month.
  • The fi lters should be replaced every 12 – 18 months; the UV-C lamp (10) should be replaced every 12 – 24 months. If you have any questions about  spare  parts, please contact the customer service department via our website: www.dspro.de/kundenservice

Use

PLEASE NOTE!

  • The device should only be used if it has been completely and correctly assembled! The dust container and the fi lters must be inserted and must not be  damaged. If the dirt were to get inside the motor unit, this could damage the motor.
  • Make sure that the safety switches of the UV-C lamp are not blocked!
  • Always test the device fi rst on a small, inconspicuous spot.

1. Insert the mains plug into a properly installed plug socket that is easily accessible.2. Place the device down fl at on the surface which is to be cleaned.3. Press the On / Off switch (1) to switch on the device. The device starts to vacuum and the UV-C lamp (10) switches on. You can look through the viewing window (4) to check whether the UV-C lamp is switched on.4. Press the vibration button (14) to activate the vibration head (9). The vibration shakes up the surface which is to be cleaned and the dust which is agitated is sucked in through the suction opening (13).5. Guide the device over the surface to be cleaned.6. After vacuuming, press the On / Off switch to switch off the device.7. Remove the mains plug from the plug socket.

Cleaning and Storage

PLEASE NOTE!

  • Empty the dust container each time after you use the device. The fi lters must also be regularly cleaned in order to prevent overloading of the motor.
  • Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the device. These can damage the surface.
  • Make sure that the mains plug has been pulled out and the device is disconnected from the power.
  • As required, wipe down the motor unit with a damp soft cloth. Then dry it with a soft cloth.
  • Wipe out the recess for the dust container (5) with a duster.
  • Store the device in a dry, cool place that is not accessible to children and animals.

Emptying the Dust Container1. Reach into the recess in the dust container (5) and pull it up and out of the motor unit (3).2. Reach into the opening and pull the fi lters out of the dust container.3. Empty the dust container.4. Wipe out the dust container with a dry duster if necessary.

Cleaning the Dust and HEPA Filters5. Unscrew the dust fi lter (15) anticlockwise until the arrow on the dust fi lter points to the open padlock symbol (see picture).6. Detach the dust fi lter from the HEPA fi lter (16).7. Tap out both fi lters and clean them with a soft brush if necessary. Please note: For thorough cleaning the fi lters can be rinsed under cold (!) running water.NOTICE: Allow both fi lters to dry completely before the device is reassembled.

8. Place the dust fi lter on the HEPA fi lter.9. Screw on the dust fi lter clockwise until the arrow on the dust fi lter points to the closed padlock symbol.10. Insert the fi lters into the dust container (5).11. Insert the dust container with the fi lters into the motor unit (3).

Cleaning the UV-C Lamp PLEASE NOTE!■ CAUTION – Danger of Burns! The UV-C lamp will become hot during use. Allow the UV-C lamp to cool suffi ciently after using the device.1. Undo the two screws on the cover (11) of the UV-C lamp (10) and take off the cover.2. Wipe down the UV-C lamp with a dry duster. NOTICE: Make sure that you do not touch the UV-C lamp with your fi ngers!3. Place the cover back on and fi x it in place with the two screws.

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the problem yourself. If the problem cannot be solved with the steps that are listed, contact the customer service department.

Do not attempt to repair a electrical device yourself!

Problem

Possible cause / solution / tips
The device generates no suction. • Is the mains plug inserted in the socket correctly? Correct the fi t of the mains plug.• Is the plug socket defective? Try another socket.• Check the fuse of the mains connection.• Is the device switched on? Press the On / Off  switch (1).
Low suction force. • Is the dust container (5) too full? Empty the dust container.• Are one or both fi lters heavily clogged up? Clean the fi lter(s).• Is the suction opening (13) blocked? Switch off  the device, pull the mains plug out of the plug socket and remove the blockage.
The UV-C lamp (10) does not light up. • The automatic switch-off  function of the UV-C lamp has been activated. Check the safety switches (see the “Safety Devices” chapter).• The automatic switch-off  function has not been activated. The UV-C lamp or the device is  defective. Contact our customer service department.
The vibration head (9) does not vibrate. • Has the vibrating function been switched on? Press the vibration button (14).
During vacuum cleaning, an  unpleasant smell  is detected. • Is the device being used for the fi rst time? A smell often develops when new devices are fi rst  used. The smell should disappear once the device has been used several times.• Has the device already been used frequently? The device is defective. Switch off  the device, pull  the mains plug out of the plug socket and contact the customer service department.

Technical DataModel number: SC04Article number: 02243 (white-limegreen); 07856 (white-blue)Voltage supply: 220 – 240 V ~ 50 / 60 HzPower: 300 WProtection class: IIID operating instructions: Z 02243_07856 M DS V4 0520 uh

Disposal

PLEASE NOTE!■ The UV-C lamp should be removed prior to disposal of the device and disposed of separately from the device. Notes on how to remove the UV-C lamp can be  found in the “Cleaning and Storage” chapter – “Cleaning the UV-C Lamp”.Dispose of the packaging material in an environmentally friendly manner so that it can be recycled.This device is governed by the European Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). Do not dispose of this device as normal domestic waste, but rather in an environmentally friendly manner via an offi cially approved waste disposal company.

All rights reserved.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , ,