CLIPSAL Electronics Motion Sensors Wiring Occupancy User Manual

Table of Contents

Electronics Motion Sensors Wiring Occupancy

Clipsal Motion and Occupancy SensorsThe sixth sense in security and energy management.clipsal.com/sensors

2IntroductionMotion and occupancy sensors offer benefits in security, energy management, hospitality and true `hands-free’ convenience. A motion sensor is a lighting control device that detects movement, such as a person walking into a space. Once detection occurs loads are automatically switched on and are then switched off after a preset amount of time. The Clipsal Infrascan® range is the benchmark and preferred choice for motion sensors due to their reliability and simplicity of installation and operation. Occupancy sensors detect the occupancy of a space, utilising highly accurate detection technology. Occupancy sensors detect fine motions such as the typing of a keyboard, which trigger the load of the sensor. Clipsal offers a wide range of motion and occupancy sensors for use in residential and commercial applications. This range encompasses standalone sensors and system integrated sensors to provide diverse opportunities to address all residential and commercial energy management needs. Different technologies including Passive Infrared (PIR), Ultrasonic (US) and Microwave provide appropriate solutions for different environments.

clipsal.com/sensors

Contents

Infrascan® Sensors

750 Series Outdoor

751 Series Corner Mount

753 Series 360° Flush Mount

753 SSR 360° Surface Mount

Commercial Sensors

752IR2RC Wide Range

752HF2RC Microwave

752DALI Series DALI Output

752/CD Series Dual Tech

C-Bus® Sensors

5750 Series Outdoor

5751 Series Corner Mount

5753 Series 360° Flush Mount

5754 Series 360° Surface Mount

DALIcontrol Sensors

DCDALMS360 360° Flush Mount

DCDAL31MOD 30 Series Mechanism

Infrascan® Sensors

750WP Outdoor Sensor, 2 Wire

750WPR Outdoor Sensor, 3 Wire

The 750 Series is Clipsal’s flagship sensor, well known for its robustness, ease of install and simple functionality. The Infrascan provides the dual benefits of safety and security. Designed for Australia’s harsh conditions with a UV protected enclosure and an IP66 rating, the sensor is completely dust and waterproof allowing for installation in outdoor areas. Ideal for garages or carparks.

Features· 110° field of view, covering up to 18 metres from unit · PIR sensor technology for precise outdoor motion detection · Flat, multi segmented lens divides `field of view’ into 48 zones reducesnumber of `dead zones’ · Wall or ceiling mounted for flexibility in installation positioning · Prewired 2 and 3 core lead for reduced installation time and varietyof cabling termination methods · 3 wire model has a highly robust internal relay for high load ratingslongevity and flexible applications including LED lighting · Suitable for residential and commercial applications

Specifications

750WP

750WPR

Supply

AC 200 265V, 50Hz

Output

10A

Time Setting

5 seconds to 20 minutes

IP Rating

IP66

Wiring

2 Wire

3 Wire

See data sheet on Clipsal.com for full specifications.

clipsal.com/sensors

Scanned Area – Horizontal Plane

8.5 metres approx.

Detection Area 6×6 metre

90º Viewing Angle 90º

2.4m

Scanned Area Veticle PlaneFloor

751 Corner Mount Sensor, 2 Wire

751R Corner Mount Sensor, 3 Wire

The 751 Series provides 90° of detection, designed for installation in corners. With precise PIR detection and robust design, the sensor is ideal for applications in bathrooms, walk in robes and home offices.

Features· 90° viewing angle from sensor head, detection range 6 x 6 metres, at 2.3 metre mounting height· PIR sensor technology for precise indoor motion detection · Designed for room corner mounting · Sensor rotatable by 120° easy adjusting of sensing zone · Simple installation for faster fit off · Two wiring types suitable for a variety of applications three wire unitscan be paralleled to control a single load from multiple sensors · Suitable for residential and commercial applications

Specifications

Supply Output Time Setting

751

751R

AC 200 265V, 50Hz

10A

5 seconds to 20 minutes

IP Rating

Wiring

2 Wire

See data sheet on Clipsal.com for full specifications.

IP20

3 Wire

753 360° Flush Mount Sensor, 2 Wire

753R 360° Flush Mount Sensor, 3 Wire

The 753 Series utilises an advanced quad element sensor array to allow instantaneous detection. Appearance wise, the 753 is a slimline, fully recessed mounting facility, making it one of the most sleek and unobtrusive 360° sensors available. Ideal for applications in bathrooms, walk in robes, pantries and office areas.

Features· 360° field of view, with detection range 10 metre diameter, at 2.4 metre mounting height· PIR sensor technology for precise indoor motion detection · Unobtrusive flush mount design · Advanced quad element sensor · Recessed ceiling mounted · Robust design and easy to install with large wiring terminals · 753R has a high 10A load rating for use with a variety ofapplications including LED lighting · Suitable for residential and commercial applications

Specifications

753

753R

Supply

AC 200 265V, 50Hz

Output

10A

Time Setting

5 seconds to 20 minutes

IP Rating

IP20

Wiring

2 Wire

3 Wire

See data sheet on Clipsal.com for full specifications.

Top View at 2.4m Mounting Height 5m 2.5m 0m 2.5m 5m

clipsal.com/sensors

2,5 m

7 m

4 m

2 m

0 m

2 m

4 m

7 m

2,5 m

7 m

4 m

2 m

0 m

2 m

4 m

7 m

753CF1 360° Flush Mount Sensor, 1 Output

753CF2 360° Flush Mount Sensor, 2 Outputs

The 360° PIR Sensor is low profile, allowing for an unobtrusive addition to the room, while maximising convenience and energy saving. With its simple installation and flush mounting, the sensor is ideal to address basic sensor requirements, including toilets, walk in robes, pantries and small offices.

Features· 360° field of view, with detection range of 3.5 metre radius, and up to 7 metre if titled with gimble· Small, attractive flush sensor with unobtrusive design · Gimbled head for range adjustment and easy access to trimpots · Two models available – Single load (for lighting) and dual load(for lighting and HVAC) · Quick and easy settings for lux level and time on both outputs · Consists of sensor and power box to allow for low ceiling spaces · Lens mask provided to shield unwanted detection zones · Suitable for residential and small commercial applications

Specifications

Supply Output Ratings

753CF1

753CF2

AC 220-240 V, 50/60 Hz

LED: max. 100 W Incandescent lamps:max. 1000 W

Output 1: (Switched Active) LED lamps: 100 WIncandescent lamps 240V a.c.: 2000 W

Time Setting

30s to 30 min

Output 2: (Voltage Free Relay) AC 250 V, 5 A resistive Motor: 100 WTime 1 (Output 1): 30s to 30 min

Time 2 (Output 2): 10s to 15 min

IP Rating

IP20

See data sheet on Clipsal.com for full specifications.

753SSR 360° Surface Mount Sensor

The 753SSR provides high resolution PIR detection over a wide area of 24 metres diameter. Equipped with four pyro sensors, the sensor is capable of detecting fine movements, such as a finger moving, within its inner diameter as well as larger movements in its outer detection area. Ideal for indoor or areas such as open area living, offices, car parks, garages, carports or outside spaces.

Features· 360° field of view, with detection range 24 metre diameter · Advanced resolution with four PIR pyro sensors fordetection of small movements · Ceiling surface mounted with inbuilt wiring box · Inbuilt 4 hour manual override ON feature · 1416 switching zones and 10 detection levels for precise detection · Lens mask provided to shield unwanted detection zones

Specifications

753SSR

Supply

240V 50Hz

Output

ELV: 1000W Max Fluoro: 1000W Max LED: 8x LED drivers Max Incandescent / 240V halogen: 2400W Max

Time Setting

5 seconds 15 minutes Pulse Mode (approx. 2 seconds)

IP Rating

IP54

See data sheet on Clipsal.com for full specifications.

clipsal.com/sensors

Side View Top View

Major Motion Minor Motion360 o

Commercial Sensors

752IR2RC Wide Range Sensor

The 752IR2RC is a wide range ceiling mounted sensor with dual output for lighting and HVAC control. The sensor detects movement over 30 metres, providing high sensitivity within the minor and major motion zones. Ideal for use in large open areas, lobbies, corridors, offices, libraries, conference rooms and reception areas.

Features· 360° field of view, with detection range 30 metre diameter · PIR sensor technology for precise indoor detection · Switching of two outputs (e.g. light and HVAC)with two independent adjustable timers · External triggering via pushbutton · Configurable timer options including pulse output to trigger external relays · Optional wireless remote control (752RC/IR) for ease of configuration · Suitable for flush or surface mounting with both bases included

SpecificationsSupply Output

752IR2RCAC 220240 V, 50/60 HzOutput 1: (Switched Active): LED lamps: 100 WIncandescent lamps: 2000 W

Output 2: (Voltage Free Relay): AC 250 V, 5 A resistive Motor: 100 W

Time Setting

Time 1 (output 1): from approx. 10 s to approx. 30 min Time 2 (output 2): from approx. 10 s to approx. 60 min

IP Rating

IP40 (flush mount) or IP42 (surface mount)

See data sheet on Clipsal.com for full specifications.

2.5 – 5 m

752HF2RC Microwave SensorThe 752HF2RC is an occupancy detector with an integrated High Frequency Doppler Effect Sensor providing high sensitivity to small motion, suitable for many commercial applications. It allows excellent detection ability for heights reaching 10 metres and through non-metallic materials. Ideal for high ceilings, foyers, above ceiling spaces, factory high bay applications and areas where detection without direct view to movement is needed and where temperature influences might cause false detection with PIR sensors, such as data centres.

Features· High frequency technology for advanced occupancy detection · Strong detection at significant heights 10 metre diameterat height of 10 metres · High performance sensing dust, temperature, light,airflow, sound or vibration will not affect performance · Sensor penetrates nonmetallic materials (e.g. wood, glass, thin brick) can detect motion in areas where direct view is unavailable · Detection range 14 metre diameter, at an installation height of 2.5 metres · Optional wireless remote control (752RC/HF) for ease of configuration · 360° field of view · Integrated light level sensor – set desired thresholds for switching on the light · Suitable for flush or surface mounting with both bases included

SpecificationsSupply Output

752HF2RCAC 220240 V, 50/60 HzOutput 1: (Switched Active): LED lamps: 100 WIncandescent lamps: 2000 W

Output 2: (Voltage Free Relay): AC 250 V, 5 A resistive Motor: 100 W

Time Setting

Time 1 (output 1): 10s to 30 min Time 2 (output 2): 10s to 60 min

IP Rating

IP40 (flush mount) or IP42 (surface mount)

See data sheet on Clipsal.com for full specifications.

5.5 – 10m

clipsal.com/sensors

Side View Top View

Major Motion Minor Motion360 o

752DALIRC DALI Output Master Sensor 752DALIS DALI Output Slave Sensor

The 240V powered stand-alone DALI Output Sensors provide occupancy detection with multi-functional capabilities including switching on and off and dimming of end point DALI fittings, offering comfort and convenience as well as energy saving benefits. The DALI Slave PIR Sensor provides detection range extension for the Master Sensor. Ideal for lobbies, class rooms, offices and conference rooms.Features· PIR sensor technology for precise motion and occupancy detection · 360° field of view, with detection range of 8 metre diameter · Switching and dimming of DALI electronic ballasts · Daylight harvesting for constant brightness management · 2 independent DALI broadcast outputs on the Master Sensor · Detection range extended by up to 10 Slave Sensors · Input for external switches for manual override · Optional wireless remote control (752RC/DALI) for easy configuration · Suitable for flush or surface mounting with both bases included

Specifications

752DALIRC

752DALIS

Supply

AC 220240V, 50/60Hz

Output

DA1 and DA2 (per zone): Max. 25 DALI ballasts 16V d.c. , 50mA max

Managed by Master

Time Setting

1 min to 60 min

Managed by Master

Standby Mode

Options:

N/A

Output level:10%, 20%,

30% or OFF

Time settings: 5 ,10, 15 min or infinity.

IP Rating

IP40 (Flush mount) or IP42 (surface mount)

See data sheet on Clipsal.com for full specifications.

752CD1RC Dual Tech Sensor, 1 Output

752CD2RC Dual Tech Sensor, 2 Output

The Dual Tech Occupancy Sensors utilise PIR and Ultrasonic technologies to provide highly sensitive yet accurate detection. The sensors detect minor and major movement, while also screening out nuisance or false triggering. Providing logic functions to enable optimal detection performance through the entire coverage area, dual technology sensors are best equipped to deal with commercial applications such as open office areas, conference rooms or class rooms.

Features· Highly effective detection combining Ultrasonic technology (for high sensitivity of motion) with PIR (to combat false triggering)· 360° field of view, with two detection zones · Detects minor movements such as typing or reading · 4 detection options: PIR + US, PIR only, US only, PIR or US · Optional wireless remote control (752RC/CD) for easy configuration · Single channel model for control of lighting and dual channel modelfor simultaneous control of lighting and HVAC · Suitable for flush or surface mounting with both bases included

SpecificationsSupply Output

752/CD1RC

752/CD2RC

AC 240V~ ±10% 50/60Hz

(Switched Active): LED lamps: 300W Incandescent: 2000 W

Output 1 (Switched Active): LED lamps: 600WIncandescent: 2300 W

Output 2 (Voltage Free Relay): 5A for < 250V AC resistive, 5A for < 30V DC

Time Setting

5 sec – 30 min

Time 1 (Output 1): 5 sec 30 minTime 2 (Output 2): 10 sec 60 min

IP Rating

IP20

See data sheet on Clipsal.com for full specifications.

PIR Minor Motion PIR Major Motion Ultrasonic Minor Motion Ultrasonic Major Motion

C-BusC-Bus is a micro-processor controlled wiring system for lighting control and energy management. In buildings, it allows facility managers and integrators to configure an area or zone as required; such as automatically switching lights off or adjusting light intensity in accordance with natural light levels, plus integrate with the BMS for building wide control. In residential environments, C-Bus offers a total luxury package, controlling multiple devices while integrating with 3rd party systems to achieve a customised solution for the smart home. With C-Bus, you can achieve an environment of comfort, convenience, security and energy efficiency in any of the following applications:Residential· Homes · ApartmentsCommercial· Office · Warehouse and Industrial · Education and Health · Sporting Facilities · Hotels and Accommodation · Retail · Hospitality and EntertainmentAdding sensors make an environment smarter and more efficient. C-Bus sensors allow elements such as presence, occupancy and vacancy to be detected and in turn, control loads or functions plus adjust lighting levels to alter the environment as required.

clipsal.com/sensors

5750WPL-GY C-Bus Outdoor Sensor

Advanced C-Bus PIR sensor suitable for both outdoor commercial and residential applications within a C-Bus system solution.

Features· 110° field of view with four detection zones long range 18 metres, intermediate range 8 metres, short range 4 metres and ultra short range 1.2 metres at 2.4 metres mounting height· PIR sensor technology for precise motion detection · Wall or ceiling mounted for flexibility in installation positioning · Inbuilt light level sensor supporting a Sunset Switch program · Capable of controlling up to 4 C-Bus group addresses · Dual element detectors minimise false triggering · Features light threshold and PIR sensitivity adjustments on the unit · Programmable using C-Bus Toolkit commissioning software, offeringadvanced system features

SpecificationsSupply Output Time Setting IP Rating

5750WPL-GY Powered by C-BusC-Bus 1 second to 18 hoursIP66

Ultra short zones nominal range 1.2m Short range zones nominal range 4m Intermediate zones nominal range 8m Long zones nominal range 18mHead vertical

Optimum “approach path”Fields of view top elevation Fields of view side elevation

clipsal.com/sensors

8.5m approx.6 Ceiling

m x 6m approx.

5751L-WE C-Bus Corner Mount SensorAdvanced corner mount C-Bus PIR sensor suitable for both commercial and residential applications within a C-Bus system solution.Features· 90° field of view, with detection range 6 x 6 metre, at 2.4 metre mounting height · PIR sensor technology for presence and occupancy detection · Surface mount for corner room installation · Inbuilt light level sensor supporting a Sunset Switch program · Capable of controlling up to 4 C-Bus group addresses · Dual element detectors minimise false triggering · Features light threshold and PIR sensitivity adjustments on the unit · Programmable using C-Bus Toolkit commissioning software, offeringadvanced system features

SpecificationsSupply Output Time Setting IP Rating

5751L-WE Powered by C-BusC-Bus 1 second to 18 hours Suitable for indoor use

2.4m

Floor

5753L C-Bus 360° Flush Mount Sensor

5753PEIRL C-Bus 360° Flush Mount, Multi Sensor

Advanced C-Bus sensor including PIR sensor, Light Level sensor and an Infrared receiver (5753PEIRL only). Suitable for both commercial and residential applications within a C-Bus system solution.

Features· 360° field of view, with detection range 15 metre diameter, at 2.4 metre mounting height· PIR sensor technology for precise motion and occupancy detection · Light level sensor for light level maintenance (daylight harvesting) · Flush mount for unobtrusive appearance · Features a Sunset Switch program · Capable of controlling up to 8 C-Bus group addresses or 8 C-Bus scenes · Supports corridor linking for commercial building applications · Dual element detectors minimise false triggering · Programmable using C-Bus Toolkit commissioning software, offeringadvanced system features

Additional features of 5753PIERL· IR receiver for C-Bus control from a handheld remote

SpecificationsSupply Output Time Setting IP Rating

5753L

5753PEIRL

C-Bus

1 second to 18 hours

Suitable for indoor use

PIR Area of Detection (Side View)

Side View Ceiling

3.7m (12ft)

2.4m (8ft)

12m 10m (39ft) (33ft)

6m (20ft)

2m 0m 2m (7ft) (0ft) (7ft)

8m (26ft) 6m (20ft) 4m (13ft) 2m (7ft) 0m (0ft) 2m (7ft) 4m (13ft) 6m (20ft) 8m (26ft)

2.7m 3.0m (9ft) (10ft)

6m (20ft)

10m 12m (33ft) (39ft)

clipsal.com/sensors

PIR Area of Detection (Top View)PIR Area of Detection (Side View) 30°7.6m (25ft) 9.7m (32ft)

Minor motion 7.6m (25ft)

Major motion 9.7m (32ft)2.7m (9ft)

5754ODPE C-Bus 360° Surface Mount Sensor

5754ODPEIR C-Bus 360° Surface Mount, Multi Sensor

Advanced C-Bus sensor including PIR sensor, Light Level sensor and an Infrared receiver (5754ODPEIR only). Suitable for both commercial and residential applications within a C-Bus system solution.

Features· 360° field of view, with detection range of 10 metre diameter, at 2.4 metre mounting height· PIR sensor technology for precise indoor motion and occupancy detection · Light level sensor for light level maintenance (daylight harvesting) · Surface mount for quick mounting onto solid surface such asmasonary/slab or wood · Low-profile surface mount design extends only 33mm from themounting surface · Features a Sunset Switch program · Capable of controlling up to 8 C-Bus group addresses or 8 C-Bus scenes · Supports corridor linking for commercial building applications · Dual element detectors minimise false triggering · Features light threshold & PIR sensitivity adjustments on the unit · Programmable using C-Bus Toolkit commissioning software, offeringadvanced system features

Additional features of 5754ODPEIR· IR receiver for C-Bus control from a handheld remote

SpecificationsSupply Output Time Setting IP Rating

5754ODPE

5754ODPEIR

C-Bus

1 second to 18 hours

Suitable for indoor use

DALIcontrolDALIcontrol is a lighting control system built on the DALI (Digital Addressable Lighting Interface) international standard providing a single interface for all electronic control gear (light sources) and electronic control devices (lighting controllers) and is perfectly tailored to control office lighting in multi-storey buildings. The DALIcontrol Native, Simple and Advanced solutions provide the ability to scale a lighting system from a room, to a floor, to a complete building and beyond. Each DALIcontrol system can utilise a mixture of DALI devices which can include DALIcontrol switches and sensors plus DALIcontrol Line Controllers to control lighting and exit and emergency fittings on DALI lines.DALIcontrol sensors are an important component for intelligent lighting control within a DALI system and make an environment smarter and more efficient. DALIcontrol sensors allow elements such as presence, occupancy and vacancy to be detected and in turn, control loads or functions plus adjust lighting levels to alter the environment as required.

DCDALMS360 DALIcontrol 360° Flush Mount Motion Sensor

Advanced DALIcontrol motion sensor suitable for commercial lighting control applications within a DALI system solution.

Features· 360° field of view, with detection range of 10 metre diameter, at 2.4 metre mounting height· PIR sensor technology for precise motion and occupancy detection · Light level sensor for light level maintenance (daylight harvesting) · Flush mount for unobtrusive addition to room · Quickly mounts onto ceiling tiles or cavity ceilings · Supports linked control of PIR or Lux sensing for the same targets · Configurable on and off actions · Up to 4 switchable profiles · Features light threshold and PIR sensitivity adjustments on the unit · Programmable using DALIBuildings commissioning software, offeringadvanced system features

SpecificationsSupply Output Time Setting IP Rating

DCDALMS360 Powered by DALIDALI 1 second to 255 minutes Suitable for indoor use

Top View at 2.4m Mounting Height

Side View Ceiling

3.7m (12ft)

2.4m (8ft)

6m (26ft) 4m (20ft) 2m (13ft) 0m (0ft) 2m (7ft) 4m (13ft) 6m (20ft)2.7m 3.0m (9ft) (10ft)

(20ft)

(33ft)

(7ft)

(0ft)

(7ft)

(13ft)

(20ft)

clipsal.com/sensors

Top View at 2.7m Mounting Height

2.5m (8ft) 1.5m (5ft) 0m (0ft) 1.5m (5ft) 2.5m (8ft)

Ceiling2.7m2.5m 1.5m 0m 1.5m 2.5m (8ft) (5ft) (0ft) (5ft) (8ft)

DCDAL31MOD DALIcontrol 30 Series Mechanism Motion Sensor

Advanced DALIcontrol motion sensor suitable for commercial lighting control applications within a DALI system solution.

Features· 120° field of view, with detection range 5 metre diameter, at 2.7 metre mounting height· PIR sensor technology for precise motion and occupancy detection · 30M format suits Clipsal gridplate or DALIcontrol housing fitment · Detection range typically 5 metres from the lens, when installed in wall · Configurable on and off actions · Up to 4 switchable profiles · Programmable using DALIBuildings commissioning software,offering advanced system features

SpecificationsSupply Output Time Setting IP Rating

DCDAL31MOD Powered by DALIDALI 1 second to 255 minutes Suitable for indoor use

5m Top View

5m (16ft) 2.7m (9ft)

0m (0ft) 2.7m (9ft)

Wall

5m (16ft)

Side View

5m Ceiling

Floor

2.7m (9ft) 1.6m (5ft) 0m (0ft)

Wall

Clipsal Lighting and Sensors SolutionsSensor technology has always been a great way to improve performance and lifespan of lighting in any installation, as well as reducing running costs by only having the light on when it’s needed. When you combine this with Clipsal’s range of energy efficient LED lighting you start to create a solution that can truly bring maximum benefits into your building. As with our large range of sensor products, our broad range of luminaries provides an option for almost every one of your lighting needs. With products suited for residential, commercial and industrial applications we take care to ensure our offers can withstand the large inrush currents and harsh running conditions LEDs can create. Testing both sensor and luminaire together gives you every assurance that when you put the combination into your installation you can rest easy it is Clipsal tested and backed to perform.FloodlightingWhether it be lighting a large surrounding area of a commercial building or subtly illuminating the outdoor living space at home, Clipsal has a range of LED Floodlights to suit your needs. From our high powered FLH series that can offer security lighting in public places to our sleek and low profile FLS series with its softer light output that is more suitable for the home alfresco area, our Floodlights allow you to continue to live even when the sun goes down. These lights increase in functionality when you add one of our outdoor senor products like a 750WPR, with its leading range and sensing technology. This means the lights are on only when you are in the area and wait till you leave it before turning them off.

FLH Series

FLS Series

clipsal.com/sensors

Exterior Batten RangeExcellent for commercial and residential applications, schools, car parks, security purposes, public buildings, carports and garages these fittings are manufactured with a robust construction that shields the high output LED technology to maintain maximum light output and lamp life. Designed to provide high levels of illumination under adverse conditions where reliable performance is crucial, the polycarbonate diffuser provides not only resistance from external impact but an even distribution of light.In commercial security installations, pairing these fittings with our 5754ODPE allows the control of these luminaires do be performed automatically as the natural light fades and artificial illuminance is required

TUFF Series

TPWP Series

DownlightsLED Downlights are suitable for multiple illumination applications from residential to commercial buildings. The slightly recessed frosted diffuser ensures reduced glare and soft glow output. Warmer light output is perfect for areas that experience high traffic and entertainment, while the cooler output versions are great for working environments that require maximum illumination. The TPDL1C1 Series comes with an integrated colour temperature selector switch enables the choice of 3000K, 4000K and 6000K outputs to ensure the perfect illumination to suit your needs.Adding and internal sensor with the appropriate sensing range and direction allows for these lights to be activated when you approach from a certain direction or only when you’re standing directly underneath. Selecting the right one is up to you.

TPDL1C1 Series

TPDL300 Series

22Standalone 240V Selection Guide

PIR Motion Sensor Surface Mount

Cat Number

753SSR-WE

Standalone or System Sensor

Standalone

Supply Voltage

240v, 50Hz

Design

3-Wire

Special Feature

High Sensitivity

PIR Motion Sensor Flush Mount

753R-WE

753-WE

Standalone

240V, 50Hz

3-Wire

2-Wire

Unobstrusive robust design

PIR Motion Sensor Corner Mount

751R-WE

751-WE

Standalone

240V, 50Hz

3-Wire

2-Wire

Room corner installation

Sensing Type Technology IP Rating Mounting Detection Angle Detection Range Timer Setting

PIR (4 pyro sensors), Precise Motion PIR, Motion detection detection (fine movements)

IP54

IP20

Ceiling, surface 360° Ø 24m at H = 2.5m 5 sec 15 min Pulse mode

Recessed Ceiling 360° Ø 10m at H = 2.4m 5 sec 20 min

PIR, Motion detection IP20 Corner, ceiling, surface 90° 6 x 6 m 5 sec 20 min

PIR Motion Sensor Outdoor

750WPR-GY 750WP-GY

Standalone

240V, 50Hz

3-Wire

2-Wire

VEET approved, high robustness

PIR, Motion detection IP66 Wall, Ceiling 110° 18 m 5 sec 20 min

Light Level Sensor

YES

Material Penetration

Inbuilt Manual Override

YES (load on for 4 hrs)

IR Remote Control

Connectivity

(Voltage free output for C-Bus

or HRC connection)

Output Ratings

240V~10A

Warranty Suggested Application

3 year Car parks, garages

With Typical Clipsal Lighting Load TPWPLED2 – Battern, LED weatherproof

YES

NO (use separate switch to load) NO (use separate switch to load) NO (use separate switch to load)

240V~ 10A 2 year

240V~ 2A (40W min)

Homes, small offices

TPLP2 – Panel LED

240V~10A 2 year

240V~ 2A (40W min)

Toilets, bathrooms

CLC22LED – Circular LED

240V~10A 5 year

240V~5A (40W min)

Car parks, entrance ways, garage doors, driveways, porches, backyards FLS20LED – LED Flood lights

clipsal.com/sensors

PIR Motion Sensor Flush Mount Gimbal

Dual-Tech Occupancy Sensor

Microwave Sensor

753CF1

753CF2

Standalone 220 – 240V, 50 / 60Hz 3-Wire Simple, unobstrusive flush design, gimble head

752/CD1RC

752/CD2RC

752HR2RC

Standalone

240Va.c. ±10% / 50Hz

220-240Va.c., 50 / 60 Hz

3-Wire

Dual technology for high accurancy Detection for highbays

PIR Sensor, Master DALI Output PIR Sensor, Slave752DALIRC (Master) 752DALIS (Slave) Standalone220-240Va.c., 50 / 60 Hz3-WireDaylight harvesting, DALI broadcast outputs

PIR Sensor Wide Range752IR2RC Standalone 220-240Va.c., 50 / 60 Hz 3-Wire Wide detection

PIR, Motion detection IP20 Flush for false ceiling

Dual (PIR and/or Ultrasonic), Motion and Occupancy detection (fine movement) IP20Ceiling (Flush/Surface)

High Frequency Dopler Effect, Motion and Occupancy detection (fine movement) IP40 (Flush)IP42 (Surface)Ceiling (Flush/Surface)

PIR, Motion detectionIP40 (Flush) IP42 (Surface) Ceiling (Flush/Surface)

360°

Ø 7m 30s -30min Pulse modeYES

PIR: Ø 8m US: 10x16m

Channel 1: 30 sec 30 min Channel 2: 10 sec 15 min

5 sec 30 min

YES

Channel 1: 5 sec 30 min Channel 2: 10 sec 60 min

Ø 10m at H = 5,5 – 10m Ø 14m at H = 2,5 – 5m Channel 1: 10 sec 30 min, 1s pulse Channel 2: 10 sec 60 minYES

Ø 8m at H = 2.5m 1 – 60 min Pulse modeYES

Ø 30mChannel 1: ww 10 sec 30 min, 1s pulse Channel 2: 10 sec 60 min, 5s pulse YES

Wood, glass, thin brick

NO (use separate switch to load) YES

YES

YES – via Control YES – via Control NO

System Aux input System Aux input

(using Ch 2)

YES – via Control System

Aux input (using Ch 2)

YES – via Control System Aux input (using Ch 2)

240V, 4A max 100W LED SA Resistive motor: 100W3 year Homes, small officesTPDL1C1 – LED Downlights

240V~8A 2 year

240V~10A / 5A

Load 1: 220-240 V~, 8A max, 100W LED Load 2: 100W Motor 5A res 3 year

Dual channel: Max. 25 DALI ballasts, – 16V d.c. , 50mA max.3 year

Load 1: 220-240 V~, 8A max, 100W LED Load 2: 100W Motor 5A res 3 year

Public conveniences, open plan

Warehouses, gyms, hotel lobbies,

offices, class rooms, libraries/studies staircases, carparks

TPLP – Panel LED

TPHBM1 – High Bay LED

Class rooms, conference rooms, lobbies, retail stores, offices TPLP series

Lobby, warehouses, offices, corridors, function rooms TPDL402H2 – LED Downlight 35W

24System Sensors Selection Guide

C-Bus Multi-Sensor, PIR, Light Level and IR Flush Ceiling Mount

C-Bus Multi-Sensor, PIR Light Level and IR Surface Mount

C-Bus Sensor PIR and Light Level Flush Ceiling Mount

C-Bus Sensor PIR and Light Level Surface Mount

Cat Number

5753PEIRL

5754ODPEIR

5753L

5754ODPE

Standalone or System Sensor

C-Bus System

Supply Voltage

C-Bus

Special Feature

Native C-Bus Multi sensor for system based occupancy control & daylight harvesting

Native C-Bus PIR sensor for system based occupancy control & daylight harvesting

Sensor Technology

PIR / PE

IP Rating

Indoor

Mounting

Flush ceiling

Surface

Flush ceiling

Surface

Detection Angle

360°

Detection Range

Ø 15m at H- 2.4m

Ø 10m at H- 2.4m

Ø 15m at H- 2.4m

Ø 10m at H- 2.4m

Timer Setting

1 second to 18 hrs, 12 mins, 15 secs (1 sec intervals)

Light Level Sensor

YES

Material Penetration

Manual Override

YES

IR Control

YES – C-Bus IR remote control

Connectivity

Can control C-Bus connected loads Can control C-Bus connected loads Can control C-Bus connected loads Can control C-Bus connected loads

Output Ratings

C-Bus

Design

C-Bus

Warranty

2 year

Suggested Application

Commercial, Residential, install flush into ceiling

With Typical Clipsal Lighting Load N/A

C-BusC-Bus2 yearCommercial, Residential, install onto ceiling or slab surface N/A

C-BusC-Bus2 yearCommercial, Residential, install flush into ceiling N/A

C-BusC-Bus2 yearCommercial, Residential, install onto ceiling or slab surface N/A

clipsal.com/sensors

C-Bus PIR Occupancy Sensor Outdoor

C-Bus PIR Occupancy Sensor Corner Mount

DALIcontrol PIRMotion Sensor 30 Series Mechanism

DALIcontrol Motion Sensor Flush Ceiling Mount

5750WPL-GY

5751L-WE

DCDAL31MOD

DCDALMS360

C-Bus System

DALIcontrol System

C-Bus

DALI

Native C-Bus PIR sensor for

system based occupancy control system based occupancy control

Native DALIcontrol PIR sensor for system based occupancy control

Native DALIcontrol Multi sensor for system based occupancy control & daylight harvesting

PIR

IP66

Indoor

Surface

Grid plate or ceiling housing

Flush

110°

90°

120°

360°

up to 18 metres from the unit at H- 2.4m 1 second to 18 hrs, 12 mins, 15 secs (1 sec intervals)

6m x 6m at H- 2.4m1 second to 18 hrs, 12 mins, 15 secs (1 sec intervals)

Ø 5m at H- 2.7m 1 min to 255 mins

Ø 10m at H = 2.4m 1 min to 255 mins

YES

NOCan control C-Bus connected loads

NOCan control DALI connected loads

C-BusC-Bus2 yearCommercial, Residential, install onto ceiling or slab surface or wall N/A

C-Bus

DALI

C-Bus

DALI

2 year

Commercial, Residential, install onto ceiling or slab surface or wall N/A

Commercial, install into 30M grid plates or DALIcontrol ceiling housing N/A

DALI DALI 2 year Commercial, install flush into ceiling N/A

Schneider Electric (Australia) Pty. Ltd.33-37 Port Wakefield Road, Gepps Cross, South Australia, 5094 PO Box 132, Enfield Plaza, South Australia, 5085clipsal.com

Consumer Support EnquiriesPhone: 1300 669 925 Website: clipsal.com/contactus

National Customer Care (trade only)Phone: 1300 369 233 Email:

November 2017©2017 Schneider Electric. All Rights Reserved. Schneider Electric | Life Is On, EcoXpert, and Clipsal are trademarks and the property of Schneider Electric SE, its subsidiaries, and affiliated companies. All other trademarks are the property of their respective owners. 988-20011109_AU-GB

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-17

CLIPSAL

admin

Tags:

_pdf, CLIPSAL, Electronics Motion Sensors Wiring Occupancy