Cobra DrillerToggle Drywall Anchor Instruction Manual

DrillerToggle® New Installation Instructions - October 7, 2020

INSTRUCTIONS :

1.  – Using a screwdriver, push the tip of the DrillerToggle® into drywall and turn clockwise until the threads go through the wall.
2.  – Push the DrillerToggle® until the helix is flush with the wall and the arrow at 7 o’clock (as shown in picture 3).
3.  – Turn clockwise until the DrillerToggle® head is flush with wall and the arrow at 12 o’clock.
4.  – Insert the screw through the object you need to affix and into the DrillerToggle® and push until you feel a resistance.
5.  – Turn the screw clockwise until firmly in place.

WARNINGS :

• Do not use in insulated drywall.
• To deploy properly, the anchor needs a MINIMUM clearance of 2-5/8” behind the gypsum board.
• Be sure to install the anchor at a MINIMUM distance of 2” from the wood studs behind the gypsum board.

report this ad

Cobra DrillerToggle Drywall Anchor Instruction Manual – Cobra DrillerToggle Drywall Anchor Instruction Manual –