Comsol 10W Wireless Fast Charging Pad User Manual
Compatibility
Compatible with Qi-enabled devices* including
- iPhone Xs/Xs Max • Samsung S9 Series • Google Pixel 3/3 XL
- iPhone XR/X • Samsung SB Series • Sony Xperia XZ2
- iPhone 8/8 Plus • Samsung Note 9/8/5 • LG G7 ThinQ
- Samsung S1 0 Series • Huawei Mate 20 Pro • LG V30+
Features
- Super slim aluminium design & soft cloth fabric charging surface lets you charge in style
- Supports 1 OW wireless fast charging for compatible devices such as Samsung S1 0e, S10, S1 0+, S9, S9+, SB, SB+, Note 9,8,5′
- Supports 7.SW Apple wireless fast charging for iPhone XS/ XS Max XR/X/8/8 Plus’
- Supports SW standard wireless charging for all Qi enabled devices
- No need to remove your protective case. Works with most cases up to 3mm thick
- LED indicator to show charging status
- Smart IC enables energy saving mode when device is fully charged
- Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
- Includes 1.Sm micro USB cable to connect charging pad to USB wall charger (USB wall charger not included)
- Check with device manufacturer for Qi wireless compatibility
- When connected to a Quick Charge 2.0 or 3.0 wall charger (not included)
Wireless Charger Operation
- Using the included micro USB cable, connect the wireless charging pad to a USB wall charger (USB wall charger not included)
- It is recommended to use original or reputable 3rd party branded USB wall chargers. For faster charging times it is recommended to use a USB wall charger with a minimum of 2A output
- When connected to the USB charger, the blue LED will flash 3 times to indicate the charging pad is powered on and in stand-by mode
- Place your Qi enabled wireless phone on the charging pad and your phone should start charging automatically
- The blue LED will be permanently on to indicate charging
- If your phone does not start charging, move your phone until the correct position is found and your phone starts charging
- When your phone is fully charged, the Smart IC enables energy saving trickle charge mode
Please Note
To achieve 1 OW fast charging for Android devices or 7.SW fast charging for Apple devices, the charging pad needs to be connected to a Quick Charge 2.0 or 3.0 wall charger (not included)
Specifications
- Wireless Standard: WPC/Qi (v1 .2.4)
- Quantity of Wireless Charging Coils: One Coil
- Input: DC SV 2A or DC 9V 2A
- Output SW I 7 .SW/ 1 OW (Max)
- Working Frequency: 110 to 205KHz
- Charging Distance: 3 to 8mm
- Charging Efficiency: > 72%
- Dimensions: 11 0 x 11 o x 5.8mm
- Weight: 65g
Important Safety Instructions
- Only use original or reputable third party chargers and cables
- Do not get wet to avoid causing short circuit damage and leakage
- Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
- Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
- Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
- Do not clean with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause damage to the charging pad
Read More About This Manual & Download PDF:
[xyz-ips snippet=”download-snippet”]