comsol USb-C Power Bank 20000ma User Manual

USB-C Power Bank20000mAhModel No.: DPC20GY

Version 1.2

Power Bank Layout

@ usB-c Input & output USB-A Output 1: 5V 2.4A USB-A Output 2: 5V 2.4A@ Capacity LED Indicators Power On/Off

Suitable for

  • MacBook, MacBook Pro 13” & MacBook Pro 15″
  • USB-C charging laptops & ultrabooks
  • iPhone, iPad, iPod, smanphone, tablet, smartwatch, fitness tracker, digital camera, headphones, headset, speakers & more

Features

  • USB-C Power Delivery ensures fast, safe & optimal charging performance
  • Charge a MacBook once, a tablet 2 times & a smartphone 7 times
  • 45W of power provides up to 9 times the power of a standard power bank
  • USB-C PD port can fast-charge an iPhone X/B/8PIus from 0 to 5096 in 30 minutes*
  • Both USB-A outputs have integrated Smart Power Chip that identifies your device and provides maximum power for speedy charging times
  • 4A high power output for fast charging of iPad or tablet
  • Rechargeable more than 500 times
  • Four LED indicators to show remaining capacity
  • Includes 30cm USB-C to USB-C & 30cm USB-A to USB-C cables
  • Built-in over charging and short circuit protection
  • Watt Hour Rating: 4Wh
  • USB-C PD Input: DC 5V EA / 9V 2A / 12V 2A / 5V 1.5A / 20V 1.5A
  • USB-C PD Output: DC 5V 3A / 9V 3A / 12V 3A / 14.5V 3A / 20V 25A
  • USB-A Output 1: DC SV 4A
  • USB-A Output 2: DC 5V 2.4A
  • Total Output: 45W
  • Charging Time: 12 hours with 2A charger or 24 hours with 1A charger
  • Size: 188m (L) x 66mm {\/\/) x 23mm (H)
  • Weight: 450g
  • Cenifications: RCM, RoHS, 3

To Charge Power Bank

  • For fastest charging times, use the included USB-C to USB-C cable and charge the power bank using your original MacBook charger or original USB-C laptop charger
  • You can also charge the power bank using the included USB-A to USB-C cable and charge using a standard USB wall charger
  • During charging the LED indicators will flash
  • When charging is complete the LED indicators will be permanently on

To Charge MacBook or USB-C Laptop

  • Using the included U!3B-C to USB-C cable connect the U!3B-C port on the power bank to the USB-C port on your MacBook or laptop
  • Press the On/Off button to start charging

To Charge iPhone or Smartphone

  • To fast charge an iPhone X, B, or 8 Plus, use a certified USB-C to Lightning cable and connect the U!3B-C port on the power bank to your iPhone
  • To charge a smartphone, tablet, or another USB device, use the device’s own charging cable and connect either USB-A pon on the power bank to your Charging should start automatically
  • If charging doesn’t start, press the On/Off button to start charging
  • When your phone or device is fully charged, the power bank will automatically turn itself off

To Check Remaining Capacity

  • Press On/Off button and LEDs will light to show the remaining capacity
  • The LEDs will turn off automatically after about 5 seconds
LED On / Off / Flashing Remaining Capacity
Less than 5%
5% to 25%
25% to 50%
50% to 75%
75% to 100 %

Important Safety Instructions

  • To maximize battery life span, fully charge the power bank before first use
  • Store power bank in a cool and dry
  • Do not store power bank in a hot or humid environment
  • Operating temperature should be between -10°c to 45°c
  • If power bank is not used for long periods of time, you should charge and discharge once every three months
  • When charging a device, the power bank may feel warm, this is a normal operating condition and should not be cause for concern
  • In normal conditions, the battery performance will decline over several years
  • Do not dispose of power bank in heat or fire
  • Do not clean power banks with harmful chemicals or detergents
  • Misuse, dropping or excessive force may cause product damage

iPhone, iPad, iPod, Lightning, MacBook, and MacBook Pro are trademarks of Apple Inc., registered in the U.S. and other countries. U!3B-C is a trademark of U!3B Implementers Forum. Comsol and the Comsol logo are trademarks of Comsol Pty Ltd.

www.mycomsol.com.auMade in China

[xyz-ips snippet=”download-snippet”]


Posted

in

by