COWIN E8 ANC Wireless Headphones User Guide

E8 ANC Wireless Headphones User Guide

User Guide

What’s in the box

  • E8 ANC Wireless Headphones
  • Carrying Case
  • USB Charging Cable
  • 3.5mm Audio Cable
  • User Guide
  • Warranty Card

Overview

Connections

LED Indicators

Get Started

To power on: Press and hold for five seconds. You hear the power-on tones.

User Your Headphones

Music Control

Call Control

Bluetooth Connection

Note: The devices must be within range (32.8 ft. or 9 m) and powered on.

  1. Turn on the headset. If connecting for the first time, the headphone will enter the pairing mode automatically after it is powered on.Tip: Once powered on, the white LED flashes blue and red alternately.
  2. On your mobile device, enable the Bluetooth feature.Tip: The Bluetooth feature is usually found in the Setting menu.
  3. Select your headphones from the device list.Choose “E8” to connectTip:Once paired, you hear “Paired” and see the indicator flash blue slowly.

Wear Your Headset

Detachable Earcups

Hearing Safety

CARE AND MAINTENANCE

  • Do not drop, crush, bend or apply excessive force to the device.
  • Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing it in damp, humid or wet places, as it is not waterproof.
  • Clean the unit with a soft cloth or damp chamois leather. Never use solvents.
  • The Unit can only be opened by qualified personnel.
  • This device contains magnets. Keep magnetic field sensitive products such as credit cards and video screen away from this device to avoid damage.

FAQ

Q1: My Bluetooth headphones do not switch on.

  • The battery level is low. Charge the headphones.

Q2: I have difficulty to pair my device to the headset.

  • Make sure the headset is powered on.
  • Make sure your device’s Bluetooth feature is on.
  • Make sure the headset is not paired by another device. If it is, turn the headset on and press ‘+’ (volume up) and ‘-’ (volume down) at the same time to clear the headset pairing list. Then, pair again.
  • Move your device closer to the headphones and away from any interference or obstructions.

Q3: My Bluetooth headphones are connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker.

  • Refer to the user manual of your mobile phone. Select to listen to music through the headphones.

Q4: The audio quality is poor and crackling noise can be heard.

  • The Bluetooth device is out of range. Reduce the distance between your headphones and Bluetooth device, or remove obstacles between them.

COWIN E8 ANC Wireless Headphones User Guide – COWIN E8 ANC Wireless Headphones User Guide –

[xyz-ips snippet=”download-snippet”]


Posted

in

by