Cristal Blue AquaNess V4
PARTS
|
FRAME (A) |
FRONT FOOT (B) |
|
|
 |
|
X1 |
|
|
REAR FOOT (C) |
|
 |
|
|
X1 |
|
|
HANDLEBAR (D) |
|
 |
|
|
X1 |
X1 |
BAG CONTENTS
|
Pedal (E1, E2) |
Tightening knob (F) |
|
 |
 |
X |
|
X2 |
X2 |
FOOT ASSEMBLY (B&C) ON FRAME (A)
| 1 |
2 |
 |
 |
|
INSERT B then SCREW in F |
INSERT C then SCREW in F |
PEDAL ASSEMBLY (E1 et E2)
|
3 |
4 |
|
Unscrew pedal axis |
Insert E2 on the other side |
 |
 |
|
Insert E1 on one side of FRAME A |
Tighten the AXIS |
HANDLEBAR ASSEMBLY (D)
|
5 |
 |
ADJUST your Aquabike (seat, handlebars & frame
TECHNICAL SPECIFICATIONS
- Adjustable pedal power using the disc brake (from free-wheeling to maximum resistance)
- Anatomic pedals with foot arch for pedaling barefoot (neoprene adjustable buckle)
- Adjustable reversible handlebars · Standard suction pads (recommended for aquabiking classes) for all types of surfaces
- Recommended water height : 1m10 ( 40”) minimum
- Aluminum series 6000, marine quality (frame, handlebars, pedal crank) · Epoxy paint, resists to salt and chlorine
- 2-year guarantee (frame, handlebars, pedal crank)
- 6-month guarantee for wearing parts (handles, belts, saddle)
- Weight : 13.90 kg (28 lbs)
Reference : AQUABIKE V4Available in 9 COLORS : blue, white, red, light grey (aluminum grey), pink, yellow, dark grey (slate grey), water green, light blue (blue liner)
Options *** :*** XL COMFORT SADDLE*** CLASSIC AQUA HANDLEBARS -black aluminum diam.25 mm (1”)(same as on V1-V2-V3)*** FOOT PADS/TAMPONS, with hardware/screwsReplacement of standard suction pads
MAINTENANCE TIPS
THANK YOU for purchasing AquaNess.We hope you will enjoy
aquabiking or aquajogging.
PLEASE READ CAREFULLY
IMPORTANT
before each immersion or use in your pool or spa, check the pH of the water !The pH, or potential hydrogen, is the concentration of hydrogen ions in water. pH is gauged on a scale between 0 and 14. Pool water must be neutral or slightly alkaline
Pool water should ideally be at pH 7.4
- Warning: AquaNess’s warranty shall not apply if a pH imbalance causes possible alterations of the paint, frame and/or stainless steel bolts
- Remove your AquaNess from the water after use, rinse thoroughly with fresh water and wipe dry (don’t forget underneath the saddle for bikes)
- Do not add chemicals or water treatments when your AquaNess is in the water, or nearby (splashes could dissolve paint or other components)
- Be careful not to drop your AquaNess or jump on it when entering the pool. Avoid all shocks. Impacts on the paint or frame due to a drop or by improperly jumping or using AquaNess are not covered by the Limited Warranty.
- When not in use, store the AquaNess devise in a dry, ventilated area.
- Any breaches of the above maintenance advice shall void the Limited Warranty
- 2-year warranty for manufacturing defects on metal components
- 6-month warranty for wearing parts (saddle, handlebars, belts)
References
[xyz-ips snippet=”download-snippet”]