CTA PAD-ADMA Articulating Desk Mount Arm with PAD-VTH Tablet Instruction Manual

Articulating Desk Mount Arm with PAD-VTH TabletInstruction ManualPAD-ADMA

1. Base mount installation variety of Mounting InstallationsIllustrated Below
2. Arms InstallationBase mount security

   

   Changing 2 in 1 C-Calamo to grommet

   

3. Pad installationNormal Type InstallationCaution: Claws can only be adjusted in the “unlock” situation do not try to adjust the claws in the ‘lock” situation.An UnlockB Extend each claw byC Place device ontoD Lock the claw by turning to pull outward the loosened claw. the switch lock then pushes back the claw to hold the device.

   Security Type Installation

   Caution: Claws can only be adjusted in the “unlock” situation do not try to adjust the claws in the “lock” situation.A Use key to unlock theB Unlock the claw lockC Pull out each fixed claw security lock to extend the position

   D Place pad product

   E Lock the claw by switch lock then push the claw toward PAD to fixed pad product, lock security lock by push the knobAdditional EVA cushion available in the package for thinner devices

    

4. TENSION ADJUSTMENT CautionAll products are adjusted to the most suitable tension before leaving the factory, do not alter unless necessary. Screw! hinges on usage will loose, use the toolkit included to tighten them.

   Each hinge of the product can be adjusted easily with, the tool kit included in the package

    

5. Charging 

    

Cable Route 36 Taaffe Place Brooklyn, NY 11205

[email protected]

778-991-0169

www.ctadigital.com