Category: Cycle Visions

Cycle Visions Slick “Signals License” Plate Frame With Brake Light [CV-4620-Chrome Flat, CV-4620B-Black Flat] Instruction Manual

Cycle Visions “Slick Signals” License Plate Frame With Brake Light Instructions Part # CV-4620-Chrome FlatPart # CV-4620B-Black Flat Parts included: 1 – License Plate Frame4 – 10/24 x 5/8 set screws4 – Flat Washers4 – 10×24 Nyloc Installation Time: Approximately 1 hour or less. Wire as follows: Blue wire to run light circuit.Black wire to…

2023-01-11
Cycle Visions CV-7240 Dragger Instruction Manual

Bag Dragger InstructionsPart # CV-7240 Parts included 2– Stainless Steel “Bag Draggers” 10- ¼-20 x ¾ Stainless Steel Button Head Screws 10- ¼-20 Flange nuts Installation Time Approximately 1 hour or less. Place on bottom outside edge of bag Mark and drill ¼” holes and install with supplied hardware NOTE: Must be installed by a…

2023-01-11
Cycle Visions MoFlow Air Filter Assembly Instructions Manual

MoFlow Air Filter Assembly Instructions California Air Resource Board EO# D-668Legal for use in California Remove the stock air cleaner and crankcase breather hardware. Remove the black metal plate that connects the throttle body to the heads and discard where applicable. Refer to the manufacturer service manual. Clean the carburetor inlet face and both the…

2023-01-11
Cycle Visions CV-7290 Batwing Fairing Bracket Instruction Manual

Batwing Fairing Bracket” Instructions Part # CV-7290 For use with an 96-UP Harley Davidson Batwing Inner and outer fairingFits 84-up FLSTC, FLSTF and FLSTN, except Springers Parts included 2– Brackets 1- Ignition Switch Cover Plate 2-5/16-24 x 1 ¼” Button head 2-5/16-24 x 1” Button head 2-5/16-24 x ¾” Button head 4-5/16 SS Washers NOTE:…

2023-01-11