CYRUS Soundbuds2 Wireless Earbuds User Guide

User guide

Important! Read before operating this equipment!Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Clean only with a dry cloth.Install in accordance with the manufacturer’s instructions.Refer all servicing to qualified service personnel.There are no user-serviceable parts.Do not place the product in continuous sunlight or near naked flames.Check local regulations concerning the use of mobile phones when driving before using the sound buds in a car.Exercise caution when using soundBuds in a manner that may cause danger to you if you cannot clearly hear your surroundings.Never use the sound buds in areas where radio devices are not permitted.Batteries (a battery pack or installed batteries) shall not be subject to excessive heat such as sunshine, fire, or the like.Do not service the internal battery. Have it examined (and replaced if needed) by a competent service center. To prevent possible hearing damage, do not listen to high volume levels for long periods.

Specification

EarphonesBluetooth ……………………… Bluetooth V5.0, A2DP, HFP, HSP, AVRCP, SPPPower output ……………….. 5mW/chFrequency range ………….. 20-20kHzs/n ratio …………………………. >70dBBattery …………………………… 50mAhCharge time ………………….. 1.5 hoursWeight …………………………… 2 x 4.1gCharging caseBattery ………………………………. 500mAhCharge time ……………………… 2 hoursWeight …………………………… 36g

Legal noticesThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Cyrus is under license. Other trademarks and trade names are those of their respective owners.Cyrus AudioCyrus Audio is an internationally-acclaimed high-end audio company in Cambridgeshire, England. If you would like to learn more about our range, our design philosophies, and our unique technologies, then visit us at www.cyrusaudio.com.

Key

  1. Touch control
  2. Right soundBud
  3. Left soundBud
  4. Indicator/Microphone
  5. Charging case
  6. Charge level indicators
  7. Fitting band
  8.  In-ear tip

Changing the soundBud in-ear tipsRefer also to overleaf.

  1. The in-ear tips are a push fit on the sound buds. Gently pull the in-ear tip from the soundBud.
  2. Select a size and push the new in-ear tip onto the soundBud.
  3.  Ensure that the in-ear tip is seated on the soundBud correctly.

Changing the soundBud fitting bandsRefer also to overleaf.The sound buds are supplied with removable bands for additional comfort (leisure band) and fixing security (sports band). The sports bands include an additional hook for security during sporting activities.

  • To change the bands, gently remove the band fitted to the sound but and fit the new band over the soundBud body.The Left and right bands are different. Each band is marked L (left) or R (right).Ensure that the correct band is fitted to each soundBud.NOTE: The bands include a location hole of this shape . Ensure that this location hole is fitted correctly on the peg on the soundBud.

Operation

Fitting the sound buds in your earsRefer also to overleaf.

  • Unpack the left and right sound buds from the charging case.
  • Fit each of them in your ears as shown.
  • Check the fit. The in-ear tip should provide a comfortable ‘seal’ in your ear. If they are too tight or too loose in your ear to be a comfortable fit, try one of the alternative in-ear tips.

Audio performance can suffer if the fit is not correct.

Stereo listeningFor first time use –

  • Remove the sound buds from the charging case.The soundBuds will automatically power on.The left sound but will pulse green and the right will flash red/green.
  • Turn on the mobile’s Bluetooth function to search for a new device.
  • Select ‘Cyrus SoundBuds’.After a successful connection, both soundBuds will pulse green. You can now listen to music or make phone calls.

In regular use·

  • Remove the sound buds from the charging case.The soundBuds will automatically power on and connect to the last source (when available).

Using a single sound but

The left sound but can be used alone to make hands-free phone calls.

  • Remove the left soundBud from the charging case.The left sound but will connect to the mobile phone.After a successful connection, you can make hands-free phone calls using just the left soundBud.

Charging the sound budsThe charging case includes a storage battery. When the charge is available in the charging case, the sound buds will re-charge when placed in the charging case.Refer also to overleaf.

  • Open the lid.
  • Place the sound buds into the case.
  • Close the lid.The soundBuds will charge. When the sound buds are charging the indicators on the case will light.When charging is complete the indicators will switch off.

Charge level indicationThe charge level of the sound buds is sent to the connected mobile device for display, usually on the Bluetooth settings screen.NOTE: Not all mobile devices will support charge level display.The charging case includes the display of the charge level. The four indicators on the charging case show the level of charge.

Charging the charging caseIf the charge level indicators do not light when the sound buds are placed in the charging case, then there is no power remaining in the charging case and it should be charged.The charging case can be charged whether the sound buds are in the case or not.

  • Connect the charging cable (supplied) to the inlet on the back of the charging case.
  • Connect the USB plug on the charging cable to a USB outlet on a computer or a USB charger.When the case is fully charged all four indicators will light steadily.

NOTE: A USB charger will generally give a quicker charge time than a computer USB port.

Multi-Function touch controlsThe soundBud functions are controlled by touching the Cyrus logo on the back of the soundBud. The multi-function controls are used for music track navigation, volume control, answering phone calls, and access to voice assistant services on a connected mobile.

Function Action
Music Play/Pause Touch left or right once
Previous track Touch left twice
Next track Touch right twice
Reducevolume Hold left for 2 seconds
Increase volume Hold right for 2 seconds
Phone Receiving a phone call Touch left or right once
Ending a call Touch left or right once
Rejecting a call Touch left or right twice
Standby Switch on manually Hold left and right for 2 seconds
Switch off manually Hold left and right for 8 seconds
Control Mobile voice assistant Touch left or right three times

Troubleshooting

The soundBuds will not switch on.

  • The batteries may be discharged. Re-charge them according to the charging instructions.

Unable to pair.

  • Place the sound buds next to your mobile device. Check that all devices are switched on. Check that the Bluetooth function is enabled on your mobile device.

The battery in the charging case does not charge.

  • If you are charging from a computer, check that it is switched on and not in standby mode.
  • Check that the cable is properly connected to both the charging case and the computer/charger.

The sound bed batteries are not charging

  •  Check that the charging case is charged.
  • Check that the earphones are positioned correctly in the charging case with their contacts mating with the charging pins in the case.
  • Check that the lid of the charging case is properly closed.

No sound or poor quality sound

  • Check that the Bluetooth mobile device is connected to the sound buds.
  • Check that the volume is turned up on the connected Bluetooth device.
  • Make sure that the Bluetooth device is within the reception range of the sound buds.
  • Disconnect the Bluetooth device from the sound buds and check it is playing sound correctly.
  • Make sure that no other Bluetooth device is disrupting your Bluetooth connection.
  • Try an alternative in-ear tip size to ensure a good “seal” of the sound buds within your ear.

WarrantyThe warranty period is one year.Please retain the sales receipt as proof of purchase.Warranty claims must wherever possible be made through the retailer from whom the equipment was purchased.This warranty excludes:

  • Damage is caused through neglect, accident, misuse, wear and tear, or through incorrect installation, adjustment, or repair by unauthorized personnel. Any unauthorized servicing will result in loss of warranty.
  • Liability for damage or loss occurring in transit to or from the purchaser.
  • Consequential damage, loss, or injury, arising from or in conjunction with this equipment.

Equipment for attention under warranty should be consigned return carriage paid. If returned equipment is found to comply with the published specification, CYRUS reserves the right to raise a charge.The above conditions do not affect your statutory rights as a consumer.

report this ad

WEEK

This logo means that this product is not to be disposed of with your household waste. This product should be handed over to a designated collection point to be recycled. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information on collection points, contact your disposal service or City Council.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,