D-Link Model Name Firmware Release Notes Instruction Manual

D-Link Model Name Firmware Release Notes

Revision History and System Requirement:

Firmware Version Date Model Hardware

Version

TO_1.00 2016-07-29 DSL-G225 J1
TO_1.00 2016-08-12 DSL-G225 J1
TO_1.00 2016-08-19 DSL-G225 J1
TO_1.00 2016-09-01 DSL-G225 J1
TO_1.00 2016-09-14 DSL-G225 J1
AU_1.0.0 2016-09-21 DSL-G225 J1
AU_1.0.0 2016-10-08 DSL-G225 J1
AU_1.0.0 2017-01-13 DSL-G225 J1
AU_1.0.0 2017-03-09 DSL-G225 J1
AU_1.0.1 2017-03-13 DSL-G225 J1
AU_1.0.2 2017-03-22 DSL-G225 J1
AU_1.0.3 2017-12-15 DSL-G225 J1
AU_1.0.4 2018-05-28 DSL-G225 J1
AU_1.0.4 2018-10-18 DSL-G225 J1
AU_1.0.4 2018-12-29 DSL-G225 J1
AU_1.0.4 2019-02-22 DSL-G225 J1
AU_1.0.5 2019-03-22 DSL-G225 J1
AU_1.0.5 2020-02-19 DSL-G225 J1
AU_1.0.5 2020-03-03 DSL-G225 J1
AU_1.0.5 2020-03-25 DSL-G225 J1

 

Upgrading Instructions:

Change Log

Firmware Version Problems Fixed
TO_1.00 First Release.
 

TO_1.00

1.      Fixed some bug about the pages.

2.      removed all DHCP Reservation entries when host name is changed

3.      removed all DHCP Reservation entries when host name is changed

TO_1.00 1. Support VDSL.
 

TO_1.00

1.      Support IPv6.

2.      Fix some bug.

TO_1.00 1. Change the default value of WlObssCoex to disabled.
AU_1.0.0 1. Modify the default cfg according to the customer.
AU_1.0.0 1. Enable SRA feature by default.
AU_1.0.0 1. Fixed failover process restart too many times.
 

AU_1.0.0

1. Fix for LAN DHCP Server hide when add a bridge and a IPoE wan service
 

 

AU_1.0.1

1.      Fix the bug of bridge mode , doesn’t select DHCP server enable and disable

2.      Fix the bug of GE WAN port 100F , the PPPoE mode doesn’t work .

3.      Modify the FWversion.

 

 

 

 

AU_1.0.2

1.    Fix the bug of bridge mode (VDLS ) port mapping , just allow to let group ethernet port , the group LAN port can access G225 , the rest of LAN ports ( not in the group) can not access G225 web UI

2.    Fix the bug of G225 MER or PPPoE mode on VDSL , can select DHCP enable or disable but just only enable DHCP sever work .

3.    Fix the bug of VDSL PPPoE can not dialing ok in the front.

4.      Update SWversion to 1.0.2

 

AU_1.0.3

1. Fix the bug of DHCP server enabled again after reboot, although it have

been disabled before reboot.

 

 

AU_1.0.4

1.     Fix the bug of internet access failed due to the DNS proxy issue.

 

2.     Update the copy right limit to 2008-2018

 

3.     Update the software version to Au_1.0.4

 

AU_1.0.4

1.     Disabled unused ports.

 

2.     Modified the password encrypt issue when login through GUI.

 

AU_1.0.4

1. Correct the login level when access from WAN side and avoid the blank

page issue when enter the Port Forwarding page form WAN side.

 

AU_1.0.4

1. Fixed the bug of authentication error if input “Enter”, when

from web page.

login
 

 

AU_1.0.5

1.     Change the wireless driver from version 6.37.14.4803.cpe4.16L02.0-kdb to 7.14.43.21.cpe4.16L02.0-kdb.

 

2.     Update the FW version to AU_1.0.5.

AU_1.0.5 1. Fixed a security breach for ping.
 

 

AU_1.0.5

1.

2.

3.

Fixed a security breach for all cli commands.

Changed “sh” command to “” for system security. Removed cat, echo, pwd and kill commands in cli list.

 

AU_1.0.5

1.

2.

Added a prompt box when build bridge wan. Fixed wan command.

Basic Factory Default Settings:

LAN interface IP: 192.168.1.1

Subnet Mask: 255.255.255.0

WAN interfaces:
System:

1Administrator Username/Password(from LAN) : admin/admin

2User Username/Password: user/ user

3DHCP Server: Enabled

4DNS:

5Signature: None

Special Settings:
Restore Default Settings:

Press the restore button 5 seconds.

[xyz-ips snippet=”download-snippet”]


Posted

in

by