Weed Inhibiting Dansand for Beautiful Patios & Drives User Manual

Table of Contents

WEED INHIBITING DANSAND FOR BEAUTIFUL PATIOS & DRIVES USER MANUAL

DANSAND® NO GROW™ NATURAL 20KGFOR NARROW JOINTS 1-5MM

DANSAND® NO GROW™ natural contains special organic minerals to inhibit weeds growing and the very high PH value makes it very difficult for new weeds to germinate. Requires a block height of at least 4cm and gap width of between 1-5mm.

Coverage: 20kg covers 5-10m²

DANSAND® NO GROW™ STONE DUST 20KGFOR BOTH PATIOS & DRIVEWAYS

DANSAND® Stone Dust consists of crushed granite from special rock which gives it a stylish dark colour. The joint filling material creates a very long lifespan compact joint and its unique composition makes it very difficult for new weeds to take hold. Requires a block height of at least 4cm and gap width of between 1-20mm.

Coverage: 20kg covers 2-10m²

DANSAND® NO GROW™ POLYMERIC 20KGFOR HARD JOINTS

DANSAND® NO GROW™ Polymeric is flexible joint filling sand which when moistened, then activates a binding agent to harden the joint to a depth of 1cm. It requires a block height of at least 4cm and also a joint width of between 3mm & 10mm.

Coverage: 20kg covers 5-10m²

DANSAND® RENOVATIONS PROCESS

CLEAN JOINTS

STEP 1

IMPORTANT

Clean out the joints down to at least 40mm. Then use an environmentally approved weed killer.

Follow all of the manufacturers instructions for use.

REMOVE WEEDS

STEP 2

IMPORTANT

Completely remove weeds with a environmentally approved weedkiller before you start any work. NO GROW™ will not eradicate existing weeds that have roots either in or underneath the joints. NO GROW™ is not a weedkiller, it is a weed inhibitor.

CLEAN SURFACE

STEP 3

Clean off the surface with water as it will have been soiled from cleaning out the old joint filler. Leave the cleaned paving to completely dry out BEFORE filling with new NO GROW™.

MIX NO GROW

STEP 4

Mix the NO GROW™ well before use. Sweep the NO GROW™ into the joints using length-wise diagonal movements. Check there is enough NO GROW™ in the joints by firmly pressing a utensil down into the filled area. The utensil should not sink.