dB KL12Q Active Speaker User Manual

www.dbtechnologies.com [email protected]‐aeb.com

Quick start user manual Section 1

The warnings in this manual must be observed together with the “USER MANUAL – Section 2”.Le avvertenze nel presente manuale devono essere osservate congiuntamente al “MANUALE D’USO – Sezione2”.Die Warnungen in diesem Handbuch müssen in Verbindung mit der “BEDIENUNGSANLEITUNG – Abschnitt 2” beobachtet werden”.Les avertissements specifiés dans ce manuel doivent être respectés ainsi que les “CARACTERISTIQUES TECHNIQUES Section 2”Las advertencias del  presente manual see deben tener en cuenta conjuntamente con las del “MANUAL DEL USUARIO” – Sección 2”. 

A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com [email protected]

Thank you for choosing a dBTechnologies Product!

The SYA 12 is a versatile active speaker. It is equipped with one 1” compression driver (1.35” voice coil), and one 12” woofer (2.5” voice coil). The multiple input pattern allows easy and versatile use. For example, the user can connect a dynamic microphone (CH1), an independent source from a mixer (CH2), a Bluetooth MP3 reader (CH3), controlling each volume level. The user can enhance lower and upper frequencies with the convenient DSP preset function. Balanced link output allows the audio connection to a second loudspeaker, choosing among “Mix” or “Line” output types.

Check the site www.dbtechnologies.com for the complete user manual!

1) UnpackingThe box contains:N°1 SYA 12N°1 Mains cable (VDE)This quick start and warranty documentation2) Easy installationSYA 12 is equipped with:

perfect for gigging bands as well as small venues installations. The 36 mm pole-mount predisposition is designed for use on a standard pole stand (like a tripod).

A –Upper integrated handleB – Lateral integrated handlesC – Pole mount hole, with two tilt angles selection (0°/ 7.5°)

NEVER USE THE HANDLES TO SUSPEND THE SPEAKER!

Those mechanical particulars were thought of for easy use and for different configuration needs. SYA 12 is perfect for gigging bands as well as small venues installations. The 36 mm pole-mount predisposition is designed for use on a standard pole stand (like a tripod).

The acoustical design allows facing different environments. The dispersion pattern is shown in the upper picture. As described, the related pattern data are:a) vertical coverage: 60°b) horizontal coverage: 90°The rear side inclination, symmetrical, as shown in the upper picture, is 45°. SYA12 can be used as a stage monitor in small contexts, in this case, please consider the characteristic dispersion pattern presented above.

IT IS MANDATORY TO READ AND FULLY UNDERSTAND THE COMPLETE USER MANUAL FOR THE ADMITTEDCONFIGURATIONS OF THE PRODUCT, SAFETY INFORMATION, AND THE PROPER USE OF ACCESSORIES (IF ANY).

3) Connections, controls, first turn onAll the connections and controls are in the amplifier panel side:

CH1:1–Audio Combo Input (for XLR or TRS connectors)2–Line/Mic selector3–Mic/Line Volume Control CH2:4–Audio Input (Balanced / TRS)5–Line Volume control CH3 (Bluetooth ):6–BT status sync LED7–BT Volume Control MASTER SECTION8–DSP Preset switch9–Balanced audio output10–Link/Mix switch11–Master Volume with control LEDs MAINS SECTION12–VDE MAINS INPUT13–ON-OFF SWITCH

a) Connect the audio input (1). The combo connector allows a TRS or XLR connection. In case of a dynamic microphone, plug it and select “Mic” in the Audio input sensitivity switch (2). In the other cases check that the switch is set on “Line”. Adjust the level of Volume (3). b) Connect a second input, depending on the kind of connection (XLR/TRS), then adjust the related volume level.c) If needed, enable with the switch (7) the Bluetooth receiver. Pair it with a visible device (ex. an MP3 reader).d) If you need to link SYA 12 to another one, please use a cable with XLR connectors (not supplied). Connect the Link output (9) of the first, to the balanced Input(1) of the second one. In the second loudspeaker, please check that Selector (2) is set on the “Line” position and that Volume (3) is set to the correct value.e) Set properly the DSP preset switch (8), choosing between “Playback”, ”Flat”, Bass Boost” or “Wedge” configuration.e) Plug properly the mains VDE input cable (supplied) in the related input (12). Check that the audio source is set on the minimum level. Then switch the POWER switch (13) to “ON” position. Increase gradually the volume of the audio source to the desired level. Check the site www.dbtechnologies.com for further information, for added accessories, and for the complete user manual!

http://www.dbtechnologies.com/qrcode/000073/

Scan with your QR Reader App to download the complete User Manual

POWER SUPPLY SPECIFICATIONS (POWER ABSORPTION)Draw at 1/3 of full power in maximum use conditions 0’1: 1.1 A (220-240V1 – 1.7 A (100-120V-)** INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation of the limiter). We recommend sizing according to these values in case of professional installations and tours.

Download the complete user manual from the site:www.dbtechnologies.com/EN/Downloads.aspx

EMI CLASSIFICATIONAccording to the standards EN 55032 and EN 55035, this equipment is designed and suitable to operate in class B electromagnetic environments.FCC ID: 2ADDV-TLSYA12FCC CLASS B STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate theequipment.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by AEBIndustriale SRL is under license. Other trademarks and trade names are those of their respective owner.RED CERTIFICATIONHereby, AEB Industriale declares that the KL loudspeaker is in compliance with Directive 2015/53/EU, in reference to the followingharmonized standards:Health & Safety EN 62479 / EN 62368-1+A11EMC EN 301 489-1 V2.2.0, EN 301 489-9 V2.1.1, EN 55032, EN 55035Spectrum EN 300 328 V2.1.1SIMPLIFIED EU DECLARATION OF CONFORMITYThe full text of the EU declaration of conformity is available at the following internet address:http://www.dbtechnologies.com/en/downloadsFeatures, specifications,s, and appearance of products are subject to change without notice.dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured.

References

• 
  Download – dBTechnologies
• 
  Download – dBTechnologies
• 
  dBTechnologies – Professional Audio Equipment
• 
  AEB Software for Global Trade and Logistics