deconn Fiber Optic 4K HDMI Cable Instruction Manual

deconn Fiber Optic 4K HDMI Cable Instruction Manual

Questions And Answers

Q 1:  What is the difference between a fiber-optic HDMI AOC CABLE and a traditional HDMI copper cableAns: fiber-optic HDMI AOC CABLE basically does not attenuate, so the signal is more stable and transmitted further. 60% less copper than copper wire.Q. 2: How to achieve a standard HDMI2.0 4K 18G transmission effect, Confirmation of output and input devicesAns: Resolution 3840×2160, Refresh rate 60Hz, Ycbcr:4:4:4, Deep Color:8bit, Bandwidth: 17.82G Resolution 3840×2160, Refresh rate 60Hz, Ycbcr:4:2:2, Deep Color:12bit, Bandwidth: 17.82G Resolution 3840×2160, Refresh rate 60Hz, Ycbcr:4:2:0, Deep Color:16bit, Bandwidth: 17.82GQ. 3: How to properly connect fiber HDMI AOC CABLEAns: Refer to the connection direction of the above figureQ 4: HDMI AOC CABLE for bending radius, stampede, winding and other requirements during useAns: refer to illustration 4 above.Q 5: When the HDMI AOC CABLE connects both ends of the device, no signal output, and the device does not workAns: 1. Ensure proper connection to this connection line 2. Ensure that both ends of the equipment are workingQ 6: When the HDMI AOC CABLE is connected to a transit device (switch, distributor, amplifier), there is no signal outputAns: 1. Does the transit device support resolution for both ends of the device, and if it is not supported, it cannot play back 2. If the direct-plugged fiber HDMI AOC Cable works, if it works, it means that my cable is good.Q 7: Can you get a 1080p HD signal instead of a 4K UHD signalAns: Check that your output and input devices support 4KQ 8: When the HDMI AOC CABLE connects both devices and does not support 4:4:4 video formatAns: Check that your output and input devices support 4K 4:4:4.Q 9: When the HDMI AOC CABLE is connected to both devices and an intermittent flash screen appearsAns: Check to see if the cable is loose or that you have problemQ 10: When the HDMI AOC CABLE connects the devices at both ends and the screen appears?Ans: check to see if the cable is loose or that you have problemQ 11. When HDMI AOC CABLE connects devices at both ends, SDR and HDR10 switching are abnormal?Ans: This connection cable supports HDR10, you can try reseating this connection cableQ 12: When the HDMI AOC CABLE connects devices at both ends, image and sound jitterAns: Check to see if the cable is loose or that you have problemQ 13.When the HDCP handshake protocol fails when the HDMI AOC CABLE connects to both devicesAns: This connection cable is supported by HDCP1.4 and HDCP2.2, can try to reseat this connection cableQ 14: When connecting power amplifier devices without audio outputAns: Check if you plug in the ARC interface of the display device. Some devices or interfaces do not support of the ARCQ 15: When connecting the power amplifier device and turning off the display device, the power amplifier also turns off at the same timeAns: Need to debug your display device, turn off the CEC function

• If the above has not solved your problem, please contact our customer service E-Mail:
• There is no guarantee that all equipment will work. Some devices may not work

Security considerations

• Do not bring strong vibration and shock to this product, do not bring harm to this product. ¸This product shall not be used and kept in water or in places with water, direct sunlight, high temperature and humidity, dust or fumes, etc. ¸When reseating this product, you must have the necessary connector parts, reseat straight. Stretch the cable portion. Excessive force can lead to damage or failure. ¸Please don’t step on this product with furniture. Please do not let the child remove this product and accessories down ¸If the casing is damaged, the connector is rocking, etc., stop using the new cable. ¸This product should not be broken down, repaired, processed and modified. ¸The Company shall not be liable for direct or indirect damage to this product due to reason or its use. Please understand¸This product is for indoor use. Do not use it outdoors. This product is suitable for these purposes. If personal injury, social barriers, etc., the company will not be responsible.

https://www.cabledeconn.comwww.deconncable.com

Preface

Thank you for purchase. Please read this manual carefully before use. Please use it according to the content. Please keep this instruction after reading!

Product Description

This fiber optic HDMI cable can transmit the sound of the computer and laptop HDMI interface to the TV, display and projector with HDMI interface, and the resolution can reach The plug and play, without external power supply or signal amplifier, Support HDCP2.2, CEC and EDID. Small barren waist streamlined metal shell, in line with ergonomics. Fiber-optic transmission of high-frequency signals, no electromagnetic interference. The outer diameter 4.7mm photoelectric composite cable structure, the wire rod lig convenient engineering wiring.

Product Parameter

Connection Direction

Source:Connect signal output device, such as Set top box, DVD, PC and Game console.Display: Connect signal input device; such as TV, Projector, Display.

Matters Need Attention

1. When handling setting up, do not let the fiber-optic cable be affected by great impact and side pressure, so that the shell itself will be deformed, which may cause the fiber to be stuck when in use, and the resolution will be reduced. Or there may be the worst interruption. In addition, after construction wiring will also occur broken line, so need to pay attention.
2. Check the appearance and performance of the optical fiber before installing the wiring. Please test the reconstruction on the equipment you need to use to avoid unnecessary trouble at the later stage.
3. When wiring, please be careful not to tie, or pull the fiber , or use feet and other heavy objects to press the fiber, the process of breaking through the wall should not be more than 200N, if the fiber is broken, or the core broken, the optical fiber can no longer be used.
4. The optical fiber should have a small amount of surplus at the turning point, make a good drop bend at the corner, do not let the optical fiber touch sharp objects, the surplus optical fiber should be wound reasonably and beautiful, when winding the fiber, the force should be uniform, and the optical fiber should not be subjected to hard bending. So as not to damage the fiber.
5. When moving, use a line card to be fixed firmly, one at a distance of 1: 15 meters, do notstretch too much between fixed positions, leaving room for thermal expansion and cold shrinkage, and in addition, in order to prevent damage to the optical fiber in the vertical alignment, stick tape between fixed line cards once.

To prevent deterioration and breaking of the internal fiber, always ensure minimum bending semicircle. When laying, because you pull the cable, pay attention to torsion and tension to ensure that the bending radius is above 40mm.

Be careful not to twist the cable and do not apply tension on the internal fibre Channel while loosening the cable.

When laying the cable, pay attention to the angle of the machine, etc., be careful not to touch the sharp angle of the machine and equipment.

The HDMI connector cannot be suspended, the connector’s junction will be deformed, and the internal fiber may be disconnected.

Note: When reseating the HDMI connector. When inserting or removing the connector, gently insert it with the connector part. If tension or force is applied, it may lead to breakage, broken wires, faults.

When handling excess cables, follow the circle winding above the diameter of 80mm and do not apply pressure to the connector junction.

References

• 
  东莞市振德电子科技有限公司