delta Smartphone Holder X Pro
Assembly instructions
HL6800 A
Parts
Assembly videoVisit designbydelta.com/downloads
1 Remove stem cap and insert phone holder, Using spacer rings as needed.Reinstall stem cap and tighten stem bolt securely.
IMPORTANT NOTENever loosen the stem clamp bolts.
GARMIN® OR WAHOO® MOUNTING OPTIONS
1 Use Allen key (2.5mm) to remove mount screw.(FIGURE 1)
2 Choose Garmin® or Wahoo® mount, position on to the arm. Tighten mount screw with Allen key (2.5mm).
WARNINGUsing phone devices while riding can cause accidents resulting in serious injury.Important: Nuts and bolts can loosen over time, resulting in serious danger should the item fall off while in motion. Check frequently to ensure all bolts are properly tightened. Ensure the device fits snugly in the holder before riding. Not for off-road use.
Delta Cycle Corporation36 York Avenue, Randolph, MA 02368 USA800-474-6615 / www.designbydelta.com
Service: Please do not return to store;for an immediate response email[email protected]
References
[xyz-ips snippet=”download-snippet”]