devolo Mesh WiFi 2 Installation Guide

Mesh WiFi

Installationdevolo Mesh WiFi 2

When operated normally, all adapters should be plugged into power sockets on the wall. Ideally, however, the adapters should be initially set up in the room where the router is. This means you can plug the adapters into a power strip temporarily for the installation process.A. Installation via AppDownload now!devolo Home Network App

https://www.devolo.com/homenetworkapp

Download the devolo Home Network app. An installation wizard will take you through the configuration step-by step. If you prefer to carry out the installation without the app, follow the steps in Part B.1B Installation without AppPlug-in Adapter 1 + 2

Plug two of the adapters into an available power socket and wait until the LED flashes white quickly (about 1 min.).2B Plug-in Adapter 3

Plug the third adapter into the power socket and connect it to your router with the included Ethernet cable.3B Automatic Pairing

The encryption process takes place automatically. During this time, the LEDs of all adapters will flash white.4B WPS Configuration

Press the button on adapter 1.5B WPS Configuration

Within 2 minutes, press the WPS button on your Wi-Fi router. If necessary, please refer to the manual for your router to find the location of the WPS button and how long you have to press it.6B Switch off Router

Once the LEDs of all devices are flashing white continuously, the process is complete (a maximum of 3 minutes).Now switch off the Wi-Fi on your router (if necessary, refer to the manual for your router).7B devolo Mesh WiFi

All devolo Mesh WiFi devices now form a joint Mesh Wi-Fi network. You can now put the adapters in whatever locations you choose.PLC button

Wi-Fi button

Duration of the button press	Action	LED behaviour
1 second	WPS function is being carried out	Flashes white
> 3 seconds	Wi-Fi is being switched off	LED goes out
Wi-Fi LED	The devolo Mesh WiFi adapter …	Lights up white
has a fault-free connection to the Internet.	Flashes white
is attempting to establish a connection via WPS.	Off
no longer has any LED function since it was disabled by the user.	Lights up white

* On page 35 you will see how to carry out manual pairing.Help: Manual Pairing

Help: If pairing during initial installation was unsuccessful, you can carry out the manual pairing of the adapters.Connect the devolo adapters to a free wall socket and wait until the LED lashes white (approx. 1 min.).

report this ad

Press the button on all devolo adapters within 3 minutes. Once all LEDs light up white, the pairing has been completed successfully.

Support:

Warranty: 3 yearsIf your devolo device is found to be defective during initial installation or within the warranty period, please contact the vendor who sold you the product. The vendor will take care of the repair or warranty claim for you. The complete warranty conditions can be found at www.devolo.com/warranty.

devolo AGCharlottenburger Allee 6752068 AachenGermanydevolo.com46166/0820

References

• 
  Internet anywhere – devolo cures weak Wi-Fi | devolo AG
• 
  Processing
• 
  Support | devolo AG
• 
  Support – devolo AG
• 
  Support: if you need help or have questions | devolo AG
• 
  Support – devolo AG
• 
  Support – devolo AG
• 
  Support – devolo AG
• 
  Suporte – devolo AG
• 
  Support – devolo AG
• 
  Support – devolo AG
• 
  Support – devolo AG
• 
  Support – devolo AG
• 
  Assistance téléphonique et support | devolo AG
• 
  Support zu Fragen rund um devolo Produkte | devolo AG
• 
  Support Hotline | devolo AG
• 
  Support – devolo AG
• 
  Processing