digital basics air earbuds pro BHTWSEB User Manual

digital basics air earbuds pro BHTWSEB

Package Contents:

• Model: BHTWSEB
• 1x Pair Air Earbuds Pro
• 1x Charging case
• 1x USB Charging Cable
• 2x Ear tip sets

SupportIf you are having problems with your product, please contact customer support before contacting your retailer.Digital Gadgets: 866-843-6460

Digital Gadgets Limited Warranty StatementDigital Gadgets warrants this product against defects in workmanship and material for a period of 12 months from the original date of purchase.If the product fails during normal and proper use within the warranty period, Digital Gadgets will repair or replace any products or parts determined to be defective in workmanship or material at its option. All components repaired or replaced by Digital Gadgets’ service will be under warranty for the remaining warranty period.This Limited Warranty covers only the accessory components packaged with this product. This Limited Warranty does not include failure caused by improper installation, operation, cleaning or maintenance, accident, damage caused by extreme temperature, humidity or extreme electrical stress, misuse, abuse, modifications to the product, software faults, normal wear and tear or any other event, act, default or omission outside of Digital Gadgets’ control or if the unit casing has been opened. Any attempt to repair this product will void your limited warranty.

To obtain warranty service, please contact Digital Gadgets for specific instructions at the telephone number below. Dated, documented proof of the original purchase is required. Digital Gadgets customer service representatives are available by calling 866-843-6460.All other trademarks and trade names are owned by their respective owners. © 2020 by Digital Gadgets, LLC

Bluetooth® Pairing

1. Make sure earbuds are fully charged (allow 3-4 hours). Open the charging case and take out the earbuds.The blue and red lights will begin flashing.
2. Put on the earbuds and you will hear a beep after they link to each other. Now they are ready to pair to your device.
3. Open Bluetooth® in your device’s settings and select “Air Earbuds Pro”. Once paired successfully, you will hear “Connected” prompt and are now ready to use

Note: To use a single earbud, follow the same above steps.

Automatic Pairing

After the earbuds are paired once with your device, they will automatically pair to your device the next time you use them.

Please Note

1. Use this product with care do not expose the product to force, hard pressure or place heavy objects on the product. Keep the product out of reach of high temperatures as well as humidity and moisture.
2. For best performance avoid keep away from WiFi Routers. The Bluetooth® signal can be affected and/or disconnect.
3. Use the earbuds within reach of the device that is paired to Bluetooth®(up to 32 feet). For optimal connection, avoid obstacles between the connected device.
4. This product can be paired with devices that support Bluetooth®.
5. The warranty is not covered in case of damage caused by negligence or if product comes in contact with water or moisture.

Multi-Function Touch Control

1. Pause/start music: Click 2 times on L/R earbud
2. Last song: Click 3 times on Left earbud
3. Next song: Click 3 times on Right earbud
4. Power ON/OFF: Press L/R earbud for 3 seconds
5. Receiving or hang up call: Click 2 times on L/R earbud
6. Reject call: Long press 2 seconds on L/R earbud

Charging

1. Place earbuds in charging case. The indicator lights will appear red when charging and blue when fully charged in about 3-4 hours.
2. When the charging case is plugged into the power source, using the micro USB cable, the indicator light will flash red. Once the charging case is fully charged, the indicator light will stop flashing.

Specifications

FCC Caution：

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.