RX800 PRO: 2.4GHZ DIGITAL RECEIVER USER MANUAL
COMPATIBILITY
S-FHSS 2.4G air system transmitter support list as follow:
PARMETER
RX800-PRO use l ow insertion loss BPF, high performance LNA, ultra low noise 40 µV LDO, with 2 stage rx gain switch technology , make this mini receiver have excellent performance , working range 150M in open area away from building and without radio interference , other electrical specification as follow:
BIND PROCEDURE
Turn on the transmitter , power on the receiver while pressing the receiver’s key, bind procedure is completed and the receiver is working normally when green LED is solid.
FAILSAFE
Support 2failsafe mode, press the key and hold 3 s while the receiver working normally can switch failsafe mode.<A>■ :After 1s when lost transmitter signal , S.BUS keep output, THR will 988us, all other channels will 1500us.<B>■: After 1s when lost transmitter signal , S.BUS not output, user should setting related parameters to ensure flight controller handle failsafe.
LED INDICATOR
Receiver power on when working normally , the LED indicator will flash 2 times then solid The LED status as follow:
Micro RX800-PRO Digital Receiver User Manual – Micro RX800-PRO Digital Receiver User Manual –
[xyz-ips snippet=”download-snippet”]