digitech SL3542 5-In-1 Ball, Water Wave, Laser, UV and Strobe Party Light User Manual
Box Contents
- 1 x 5-In-1 Party Light
- 1 x Infrared Remote Control
- 1 x Mounting Bracket
- 1 x Mains Power Cable
- 2 x Laser Lock Keys
Product Diagram
| # | Feature: | Description: |
| 1. | Infrared Port | Used for the infrared remote control |
| 2. | LED Screen (Rear) | Displays the current mode and DMX channel |
| 3. | Function Buttons (Rear) | Menu, up, down and enter buttons to change the menu and channels |
| 4. | Microphone (Rear | Listens to the beat of the music for sound activation mode |
| 5. | DMX Input | Connect a XLR cable to the DMX input socket if you’re using a DMX controller |
| 6 | Mains PowerSocket (Rear) | Connect the mains power cable to the power socket located on the rear of the unit and plug into a 240VAC wall socket |
| 7. | DMX Output | Connect a XLR cable to the DMX output socket if you’re using a DMX controller |
| 8. | Waterwave Light | Displays a red, green, blue and white colour LED Waterwave light |
| 9. | Adjustable Knob | Adjust the tightness for the mounting bracket |
| 10. | Ball Light | Displays red, green and blue colours |
| 11. | UV/Strobe | 4 LEDs that display ultra violet (UV) and white colour strobe |
| 12. | Laser | Red and green twin lasers |
Installation
- Unscrew the adjustable knobs on each side of the party light.
- Attach the mounting bracket and align it with the screw holes.
- Insert the adjustable knobs on each side and tighten in place.
- Note: It is suggested to use a safety cable and attach it the safety rope ring located on the rear of the unit when attaching to a lighting stand.
- Insert the mains power cable in to the rear power socket of the unit and the opposite end of the cable to a 240VAC mains wall socket.
Operation
- Press the power switch located on the rear of the unit to on.
- The unit will start operating in automatic mode once turned on; you can change the modes by press the menu, up and down buttons. Please refer to the function table in the manual to see all the functions available.
Remote Control
|
Feature: |
Description: |
|
Power |
Press to turn the unit on or off |
| Mode |
Change between automatic and sound activation modes |
|
Sen+/Sen- |
Press to increase or decrease the light sensitivity |
| Flash |
Press to activate the flashing of the strobe light |
|
Speed+/Speed- |
Press to increase or decrease the flashing of the strobe light |
| Laser |
Press to activate the laser light |
|
Colour |
Select the colour between red and green lasers |
| Speed |
Press to change the speed of the lasers |
|
LED |
Press to select the disco ball LED |
| Red/Green/Blue/White |
Press to select between the different colours of the LEDs |
|
Jump |
Press to jump between one colour to another for the disco ball LED |
| Gradual |
Press to change the colour slowly for the LED disco ball |
|
Flash |
Press to change the flash of the disco ball LED |
| Motor |
Change the motor speed of the LEDs |
Functions
| NO | Main menu | Sub menu | Function |
| 1 | PU” | PUON | UV ON |
| PUOF | UV OFF | ||
| 2 | LA” | LAoF | LASER OFF |
| LAAu | LASER AUTO | ||
| LA r | RED | ||
| LAG | GREED | ||
| LArG | RED+GREED | ||
| LA01-LA20 | RED/GREED | ||
| SP 1-9 | SPEED | ||
| 3 | LE’ | LE 1 | LED 1 |
| LE 2 | LED 2 | ||
| LE 3 | LED 3 | ||
| LE 4 | AUTO1 | ||
| LE 5 | AUTO2 | ||
| LE 6 | STROBE | ||
| LE 7 | AUTO3 | ||
| Sd 1-9 | SOUND1 | ||
| SP 1-9 | SOUND2 | ||
| 4 | FL” | F LoF | STROBE OFF |
| FL 1-9 | STROBE ON | ||
| 5 | PA | PA 1 | LED 1 |
| PA 2 | LED 2 | ||
| PA 3 | LED 3 | ||
| PA 4 | LED 4 | ||
| PA 5 | AUTO1 | ||
| PA 6 | AUTO2 | ||
| PA 7 | STROBE | ||
| PA 8 | AUTO3 | ||
| Sd 1-9 | SOUND1 | ||
| SP 1-9 | SOUND2 | ||
| 6 | Au 1 | Au 1 | AUTO1 |
| 7 | Au 2 | Au 2 | AUTO2 |
| 8 | S1″ | S101-S120 | SOUND1 |
| uoL1-uoL9 | SEED | ||
| 9 | 52″ | 5201-5220 | SOUND2 |
| uoL 1-uoL 9 | SEED | ||
| 10 | A”‘ | _A001-A512 | DMX |
| Channel | DM Value | Function |
| 1 | 0-9 | water wave LED OFF |
| 10-255 | water wave LED ON | |
| 2 | 0-9 | WHITE OFF |
| 10-255 | WHITE ON | |
| 3 | 0-9 | BALL LED OFF |
| 10-44 | BALL LED RED | |
| 45-79 | BALL LED GREED | |
| 80-114 | BALL LED BLUE | |
| 115-149 | BALL LED RED+GREED | |
| 150-184 | BALL LED GREED+BLUE | |
| 185-219 | BALL LED RED+BLUE | |
| 220-255 | BALL LED RED+GREED+BLUE | |
| 4 | 0-9 | LASER OFF |
| 10-99 | LASER RED | |
| 100-199 | LASER GREED | |
| 200-255 | LASER RED+GREED | |
| 5 | 0-9 | UV OFF |
| 10-255 | UV ON | |
| 6 | 0-255 | MODER |
| 7 | 0-9 | STROBE OFF |
| 10-255 | STROBE ON | |
| 8 | 0-9 | water wave MOTOR OFF |
| 10-255 | water wave MOTOR ON | |
| 9 | 0-9 | BALL MOYOR OFF |
| 10-255 | BALL MOTOR ON | |
| 10 | 0-9 | LASER MOTOR OFF |
| 10-127 | LASER MOTOR ON 1 | |
| 128-255 | LASER MOTOR ON 2 | |
| 11 | 0-50 | 1-8CH |
| 51-150 | AUTO1 | |
| 151-200 | AUTO 2 | |
| 201-250 | SOUND1 | |
| 251-255 | SOUND2 |
Safety
- Do not open the case of the party light to avoid damage and injury.
- Keep the party light away from high temperatures as it may cause damage to the unit.
- Do not expose the party light to water or liquids to prevent the unit from damage.
- The unit must be installed in a well ventilated area.
- It is suggested to use a safety cable when fixing this unit to a mounting stand or wall to prevent the unit from falling.
- It is suggested to clean the unit’s lenses every 2-3 months with a soft cloth so the unit can display the light properly.
- Keep the remote control away from children as it contains button cell batteries which may be harmful. Contact a doctor immediately if swallowed.
Specifications
- LED: 6 x 3W RGB (Ball)1 x 5W RGBW (Waterwave)4 x 3W WUV (Strobe/UV)
- Laser: 120mW (Red), 30mW (Green)
- Modes: Automatic, Sound Activated, DMX
- Remote Control Battery: 1 x CR2025 (Included)
- Power: 240VAC, 50-60Hz
- Power Consumption: 30W
- Dimensions: 270(W) x 170(D) x 114(H)mm
Customer Support
Distributed by:Electus Distribution Pty. Ltd.320 Victoria Rd, RydalmereNSW 2116 AustraliaPh: 1300 738 555Int’I +61 2 8832 3200Fax: 1300 738 500www.electusdistribution.com.au
[xyz-ips snippet=”download-snippet”]