DIGITUS DA-90415 LED Monitor Light with Clamp Mount Installation Guide

DIGITUS DA-90415 LED Monitor Light with Clamp Mount

Product Introduction

The DIGITUS® LED Light delivers the right lighting conditions in all situations. Choose between cold working light or warm cozy light at different increments and of course in different brightness levels – all conveniently adjustable via touch control. The last light setting remains saved until the next use and does not need to be reconfigured. Installation is carried out with a simple clamp mount on the display, power supply is provided via an enclosed USB connection cable. The minimalist light body sets stylish and sophisticated accents on any desk.

Product Diagram

  1. Lamp
  2. Lamp bracket
  3. USB charging port
  4. Dimming: Long press to adjust 5 levels of brightness
  5. Power Switch: Touch the switch to turn on/off the lamp
  6. CCT: Long press to adjust 5 levels of color temperature
  7. Lamp Base

Operation

  • USB power supply, supports computer/portable power bank, etc.
  • Power input: 5V / 1A (≥ 1A)
  • For desktop computers, please use the rear USB power supply of the host.
  • The maximum width of the bracket is 45 mm.
  • The lamp easily clamps on the screen through the rotating clip.

Memory: The lamp will automatically remember your previous brightness, when turned on.

Advantages of LED Screen Bar

Eco-friendlyIt provides a safe, comfortable and consistent light which is also environmentally friendly.Low power consumptionIt consumes 75% less power than a typical incandescent light.

Long lifespanIt lasts 40 times longer than a typical incandescent bulb. (Used 5 hrs per day, it will last up to 20 years.)Flicker freeLED screen bar lamp does not flicker like traditional lighting source, thus causing less eye strain.

Specifications

Operating voltage DC 5V / 1A
Power 5W
Color temperature 3000K – 6500K
Center luminous flux ≥ 800 lux @ 300 mm
Color rendering index >80
Lifespan 25000 hrs
Material ABS plastic, aluminium alloy

Package Content

  • 1x LED Monitor Light with Clamp Mount
  • 1x USB connection cable (USB A – Micro B)
  • 1x QIG

Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.

www.assmann.comAssmann Electronic GmbHAuf dem Schüffel 358513 LüdenscheidGermany

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by