DIGITUS DA-90423 Universal TV Ceiling Mount with Height-Adjustment Installation Guide

Table of Contents

DIGITUS DA-90423 Universal TV Ceiling Mount with Height-Adjustment Installation Guide

Introduction

The height-adjustable Universal TV Ceiling Bracket from DIGITUS® is suitable for flat and curved displays with a screen diagonal from 17” to 37” and a weight of up to 20 kg. It can be optimally adjusted to different ceiling heights thanks to height adjustment. An optimal viewing angle is ensured by the variable inclination, which can be adjusted from 0 to -90° depending on the ceiling height and desired viewing angle. The entire bracket can be folded together to save space and securely locked.The installation of monitors and TV devices with VESA 100 or 200 is possible.

Warning

The ceiling structure must be able to load at least equal to the maximum weight 20 kgs (44lbs). If not, the ceiling must be reinforced. The correct installation procedure by a qualified service technician, according to installation instructions, must persist. Failure to do so may result in serious injury or death, and even death.

Safety measures must be practiced at all times during the installation of this product. Use proper safety gear and tools for the installation procedure to prevent personal injury.

Prior to the installation of this product, the installation instructions should be read and completely understood. The installation instructions must be read to prevent personal injury and property damage. Keep these installation instructions in an easily accessible location for future reference.

A secure structure must support the weight or load of the display, when mounting to a wall that contains wooden studs, dead center of the wooden stud must be confirmed prior to installation.

Do not install on a structure that is prone to vibration, movement, or chance of impact. Failure to do so could result in damage to the display and/or damage to the mounting surface.

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the display and could increase the risk of fire.

At least two qualified people should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the display.

Recommended mounting surfaces: wooden studs and solid-flat concrete. If the mount is to be installed on any surface other than wooden studs, use suitable hardware (which is commercially available).

Tools required, not included