DIGITUS DS-55126 HDMI over Fiber Optic Extender Rev. 2 User Manual
Introduction
This HDMI over fiber optic incorporates over IP transport technology. The extender set consists of an optical transmitter module that converts the HDMI signals into light pulses for transmission over a single strand of Multi-Mode or Single-Mode optical fiber cable. An optical receiver module converts the light pulses back to an HDMI signal for display on a monitor or projector. It allows you to extend up to 40 km long distance between the source device and display monitor via optical cable. It also supports IR pass back function. It can be widely applied in video conference, medical system, shopping mall, multimedia presentation…etc. filed.
Important safety notice
Please read below safety instructions carefully before installation and operation:
- Please pay attention to all the warnings and hints on this device
- Do not expose this unit to rain, moisture and liquid
- Do not put any stuff into the device
- Do not repair or open this device without professional people’s guidance
- Make sure good ventilation openings to avoid product overheating damage
- Shut off power and make sure environment is safe before installation
- Do not plug-in/out the network cables and IR cables when it is in using to avoid cables damage
- Use DC5V only. Make sure the specification matched if using 3rd party DC adapters
Features
- Support Single mode fiber optic
- No need extra installation driver
- Transmit 1080p signal up to 40km
- Support IR pas back for easy control
- Avoid the electromagnetic interference in environment for long distance transmission
- Low signal loss, wide frequency band and strong anti-interference
- High-end aluminum alloy enclosure design
- Wall-mountable design for convenient installation
Package Contents
- HDMI extender TX x1
- HDMI extender RX x1
- DC5V2A x1
- IR blaster extension cable x1
- IR receiver extension cable x1
- User’s manual x1
Installation Requirements
- Source device with HDMI output port (computer graphics card, DVD, PS3, HD monitor equipment etc)
- Display device with HDMI input port (HDTV, projector)
- HDMI cable and single mode fiber optic cable
Panel Descriptions
1. Rear panel of HDMI extender TX
① Power Input (DC 5V)② HDMI signal inpu③ IR blaster extension cable port④ Fiber optic signal send port
2. Rear panel of HDMI extender RX
① Power Input (DC 5V)② HDMI signal output③ IR receiver extension cable port④ Fiber optic signal receive port
3. Front Panel of TX and RX
① Power status indicator② Network connection indicator③ Data transmission indicator④ Reset button
Connection and operation
FAQ
Q: TV display “waiting for connection” on the bottom right corner?
A: Please check if the power supply of TX (sender) and the fiber optic cables are well connected.
Q: TV display “Please check the TX input signal”?
A: 1) Please check if there is an HDMI signal input of sender TX.
2) Try to connect the source device directly with display device to see If there is signal output from source device or change the source device and HDMI cables to retest.
Q: Display not fluent and stable?
1) Click “reset” button on the TX/RX panel or reconnect power.
Specifications
| Specification DS-55126 | |
| HDMI signal | Full compatible with HDCP |
| Support resolution | , , ,
, /60Hz, /60Hz, /60Hz |
| DDC signal voltage | 5Vp-p(TTL) |
| TMDS bandwidth | 10.2Gpbs |
| Wave length | Transmitter: 1310nm /1550nm
Receiver :1550m/ 1310nm |
| Transmission distance | 1～40km |
| Link loss | ≤14dB |
| Output light power | ≥-11dBm |
| Receive sensitivity | ≤-32dBm |
| Return loss | 15dB |
| IR remote control | Support 20~60KHz IR remote control |
| Power supply | DC5V/2A x2pcs |
| Power consumption | TX<4W RX<3.5W |
| Working temperature | 0℃～60℃ |
| Enclosure material | Aluminum alloy |
| Product dimension | 138×81.5×24 (WxDxH) x2pcs |
| Weight | TX:178g RX:177g |
| Color | Black |
Disclaimer:
The product name and brand name may be registered trademark of related manufacturers.TM and ® may be omitted on the user manual. The pictures on the user manual are just for reference, and there may be some slight difference with the real products.
We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or designThis is a Class A product. In home environment, this product may cause radio interference. In this case, the user may be required to take appropriate measures.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 358513 Lüdenscheid Germany
Read More About This Manual & Download PDF:
References
[xyz-ips snippet=”download-snippet”]