Displays2go D3 Wireless Headset User Manual
Thank you for buying our products
Hope you like this new wireless headset
If you have a good experience with this headset, we would appreciate it if you could share it with your friends.
Specifications:
Model No: D3Version: V5.0Play time of earbuds: 5HCharging for earbuds: about 40 minCapacity of charging case: 500 mAhCharging for case: about 2 hoursInput of charging case: 5V/2A maxOutput of charging case: 5V/1A max
Operational Approach:
Headphone pairing: open the charging case, at the same time remove the left and right headset, at this time the headset on the LED blue light flashes, the left and right headset at the same time prompt “power on waiting for pairing”, voice after the end of the headset red/blue light will alternately flash. At this point, the left and right headset pairings are complete. Turn on your phone’s Bluetooth search “D3” and connect to headset, with a “connected” voice prompt in the headset. If the device is not connected for 5 minutes, the headset will automatically s hut down.
Pause/Play
Click the left/right button to pause/play
Previous/Next Song
Double-click the right headset to change to the next song, double-click the left headset to change to the previous song.
Answer/Hang up the call:
When there is a call in, any click on the button of the left and right headset can be answered, and any click of the left and right button during the call can end the current call.
Headphone charging:
Put the headset into the battery compartment to close the charge compartment cover, the headset will automatically shut down and enter charging mode (at this time the charge red LED lights up), after the charge is completed, the blue LED will briefly light up, if not operated, the blue LED off to reduce battery charge. To use it simply remove the headset from the battery compartment.
Single-ear mode:
When you remove a single headset from the charging compartment (the other headset is off or charged), the headset lights up blue and then the red/blue light flashes alternately, which means that the device to be matched, you can turn on the bluetooth search function of the device, the search list will display the “D3” headset name, click on the connection. After using the one-sided headset, if you use both ears again, turn on the other headset directly and connect the headset back to the other side of the headset. Both ears are ready for use.
Charging and instructions:
Headphone charging:
Put the headset in the charging stand (charging metal point relative) during the charging process light (headphone light) full yin 5 seconds blue light off.
Charging case charging:
Use a data cable to charge the charging stand, with a blue light (charging box light) when charging, and the rear four lights are always on.
Tips:
- Do not fall, collide, scrub, twist, pat, grind or throw into the water;
- Do not put the headset in a very hot place;
- Do not expose the headset to moisture;
- Connection signals may be affected in noisy or highly disruptive environments. (e.g. airports, large electronics stores, etc.)
Common problems and solutions:
If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer service at 844-221-3388.
Displays2go D3 Wireless Headset User Manual – Displays2go D3 Wireless Headset User Manual –
[xyz-ips snippet=”download-snippet”]