DJI Cinessd Station User Guide

DJI Cinessd Station User Guide

Warnings

1. Only use compatible cables specified in this guide.
2. Only use genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI-certified manufacturers may cause system malfunctions and compromise safety.
3. Ensure the DJI CINESSDTM Station and its components are free from contamination(e.g. water, oil, soil and sand).

Introduction

The DJI CINESSD Station is specially designed to export DJI CINESSD files.

In the Box

DJI CINESSD STATION x 1

USB Cable x 1

Usage

Exporting Files

1. Insert the CINESSD into the station, then connect the station to a computer via the included cable. 
2. When connected, an icon named “DJI_XXXX” will appear. Click to start the file export.
3. Safely remove the station before unplugging it from your computer.

No additional software is required for exporting data from the CINESSD. You may also use the following DJI software based on your system.

• Windows: DJI Camera Exporter.
• Mac: DJI CINELIGHTTM.
• DO NOT remove the CINESSD when it is powered on.
• The station can be connected to a USB 2.0 port. However, an external power supply may be required.
• Insert the CINESSD before connecting the station to the computer.
• The station icon will vary based on your computer operating system.
• Plug the cable in securely to ensure USB 3.0 transfer speeds.
• If transfer speeds are slow, check that USB 3.0 mode is active.

Deleting FilesTo guarantee the high performance of the CINESSD, the station only supports file exporting. To delete files, please insert the CINESSD into the aircraft and launch DJI GOTM 4 app to format the CINESSD to free up storage space.Ensure to back up files before formatting the CINESSD.

External Power Supply

Use an external power supply when the computer is not able to detect the CINESSD or the file export is unstable. Connect the station to an external power supply as follows.

• Connect the station to the external power supply before connecting it to a computer via USB, or the external power supply may not work.
• The external power source should have a voltage above 5 V, and a current above 1 A.

LED Description

Specification

Compliance Information

FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

EU Compliance Statement:SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the EMC Directive. A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance

EU Contact Address:DJI GmbH, Industries Strasse, 12, 97618, Niederlauer, Germany