MATRICE 300 RTK
Dual Gimbal ConnectorProduct Information
In the Box
Dual Gimbal Connector
Screws and Tools
Disclaimer and Warnings
Please read this entire document and all safe and lawful practices DJITM provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms
and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this document are
trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the sole discretion of DJI. For up-to-date product information, visit http://www.dji.com and click on the product page for this product.
This disclaimer is available in various languages. In the event of divergence among different versions, the English version shall prevail.
Introduction
The MATRICETM 300 RTK Dual Gimbal Connector is used to mount a compatible payload to the bottom of the Matrice 300 RTK aircraft. Its design gives it an IP44 Ingress Protection (only when equipped with a waterproof payload), in accordance with the global IEC 60529 standard.
Usage
This device is a spare part of Matrice 300 RTK. Visit https://www.dji.com/matrice-300/downloads to view the Matrice 300 RTK Quick Start Guide and Matrice 300 RTK User Manual to see how to mount and use the product. View the Matrice 300 RTK Disclaimer and Safety Guidelines to learn more about safe usage
https://www.dji.com/matrice-300/downloads
Compliance Information
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Supplier’s Declaration of Conformity
Product name: Gimbal Connector CableModel Number: GIMBAL CONNECTOR CABLEManufacturer’s Name: SZ DJI TECHNOLOGY CO., LTD.Manufacturer’s Address: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Responsible Party: DJI Technology, Inc.Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502Contact person: Fajia WangTelephone: (650)812-0559
We, DJI Technology, Inc., being the responsible party, declare that the above-mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Signed for and on behalf of: DJI Technology, Inc. Name: Fajia Wang
Position: Certification Manager
Date: 2020-3-17
Signature:
ISED Compliance
CAN ICES-3 (B)/NMB-3(B)
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance Environmentally-friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances.
Please refer to http://www.dji.com/service for after-sales service for your product where applicable.DJI shall mean SZ DJI TECHNOLOGY CO., LTD., and/or its affiliated companies where applicable.
This content is subject to change.Download the latest version from https://www.dji.comIf you have any questions about this document, please contact DJI by sending a message to [email protected].DJI is a trademark of DJI.Copyright © 2020 DJI All Rights Reserved.Printed in China.
[xyz-ips snippet=”download-snippet”]