dji FPV Car Charger User Guide

Car Charger User Guide

v1.0 2021.01

Disclaimer

Please read this entire document and all safe and lawful practices DJITM provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI.

This document and all other collateral documents are subject to change at the sole discretion of DJI. For up to date product information, visit http://www.dji.com and click on the product page for this product. This disclaimer is available in various languages. In the event of divergence among different versions, the English version shall prevail.

Introduction

The DJI FPV Car Charger is used to charge the Intelligent Flight Battery through a car power outlet. Boasting overheating protection, the car charger automatically stops charging if the car power outlet exceeds a certain temperature.

Usage

1. Connect one end of the car charger to the car power outlet and the other end to the Intelligent Flight Battery. Alternatively, you can connect the other end to the Charging Hub to charge the Intelligent Flight Battery.
2. The LED indicator on the car charger glows solid green when charging.
3. When the LED lights on the Intelligent Flight Battery turn off to indicate charging is complete, disconnect the car charger from the car power outlet.

• Place the car charger on a stable surface. DO NOT cover the car charger. Make sure thatthere is sufficient heat dissipation.
• Only use the car charger when the engine is running. Otherwise, the battery of the vehicle may not have the required voltage for the engine to start.
• The indicator light will glow solid red if the battery is charging abnormally. Disconnect thecharger from the car power outlet and the Intelligent Flight Battery. Wait five minutes before reconnecting again to charge.
• If the car charger becomes loose and is reconnected when charging, it may be necessary to unplug and plug the Intelligent Flight Battery to resume charging.
• DO NOT touch the metal connector after it is unplugged.

Specifications

Model Operating Temperature Input Voltage DC Output Charge Time*

* Charging times were tested in a lab environment and should be taken as reference only.

Please refer to http://www.dji.com/service for after-sales service for your product where applicable. DJI shall mean SZ DJI TECHNOLOGY CO., LTD. and/or its affiliated companies where applicable.

Compliance Information

FCC Compliance NoticeFCC Compliance Statement: Supplier’s Declaration of ConformityProduct name: DJI FPV CAR CHARGERModel Number: CCX170-86Responsible Party: DJI Technology, Inc.Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502Website: www.dji.comWe, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’sauthority to operate the equipment.ISED ComplianceCAN ICES-003 (B)/NMB-003(B)

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/30/EU.A copy of the EU Declaration of Conformity is available online at www.dji.com/eurocomplianceEU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Environmentally friendly disposalOld electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

DJI Support

http://www.dji.com/support