Phantom 4 Pro V2.0 DroneQuick Start Guidev1.2
The DJI PHANTOMTM 4 Pro V2.0 is a smart prosumer flying camera capable of shooting 4K video at 60 fps and at up to 100 Mbps, and capturing 20-megapixel stills. 4 directions of obstacle avoidance allow it to intelligently avoid obstacles during flight. Using TapFlyTM and ActiveTrackTM through the DJI GOTM 4 app, you can fly anywhere visible on your screen or track a moving subject smoothly and easily with a simple tap. The camera uses a 1-inch CMOS sensor offering unprecedented clarity, lower noise, and better quality images. In addition to the above features, improved propulsion system efficiency means aircraft noise is 4dB (60%) lower than on the Phantom 4 Pro.
| 1. Gimbal and Camera2. Downward Vision System*3. Micro USB Port4. Camera/Linking Status Indicatorand Link Button5. Camera Micro SD Card Slot6. Forward Vision System7. Infrared Sensing System*8. Front LEDs | 9. Motors10. Propellers11. Aircraft Status Indicators12. Antennas13. Rear Vision System14. Intelligent Flight Battery15. Power Button16. Battery Level Indicators |
* The Vision and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the tutorials in the DJI GO 4 app or on the official DJI website to learn more. http://www.dji.com/phantom-4-pro-v2
Remote Controller
The powerful remote controller of the Phantom 4 Pro V2.0 has a transmission range extending up to 5 mi (8 km)*. It features physical buttons and dials to control exposure, camera tilt, photo capture, and video recording. Built into the remote controller is DJI’s latest long-range transmission technology OCUSYNCTM, which when paired with a compatible mobile device gives you a live HD view from the Phantom’s camera. Dual-frequency support makes the HD video downlink more stable.
| 1. Power Button2. Return-to-Home (RTH) Button3. Control Sticks4. Status LED5. Battery Level LEDs6. Power Port7. Mobile Device Holder8. Small Device Positioning Tabs(for mobile phones)9. Antennas10. Handle Bar | 11. Gimbal Dial12. Camera Settings Dial13. Record Button14. Flight Mode Switch15. Shutter Button16. Intelligent Flight Pause Button17. C1 and C2 Buttons (customizable)18. USB Port19. Micro USB Port |
The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left, and right movements. The gimbal dial controls the camera’s tilt.
* The remote controller is able to reach its maximum transmission distance (FCC) in a wide-open area with no Electro-Magnetic Interference, and at an altitude of about 400 feet (120 meters).
- Download the DJI GO 4 AppSearch for `DJI GO 4′ on the App Store or Google Play, and install the app on your mobile device.
http://m.dji.net/djigo4 - Watch the Tutorial VideosWatch the tutorial videos at www.dji.com or in the DJI GO 4 app.
www.dji.com/phantom-4-pro-v2/info#video
DJI GO 4 App DJI GO 4 supports iOS 9.0 (or later) or Android 4.4 (or later). - Check the Battery LevelsPress once to check the battery level. Press once, then again and hold to turn on/off.
- Charge the Batteries When charging is complete, the battery level indicators will automatically turn off.
- Prepare the Remote Controller
- Prepare for Takeoff Check that the propellers are secure before each flight.
- Flight
Press once to check the battery level. Press once, then again and hold to turn on/off.
Ready to Go (GPS)Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app indicates `Ready to Go (GPS)’ or `Ready to Go (Vision)’ if flying indoors.In the DJI GO 4 App:
Auto TakeoffThe aircraft will take off and hover at an altitude of 4 feet (1.2 meters).
Auto LandingThe aircraft will land vertically and stop its motors.
Return-to-Home (RTH)Bring the aircraft back to the Home Point. Tap again to stop the procedure.
NormalYou are in control of the Phantom, with satellite and Return-to-Home support.
TapFlyTap on your screen to fly your Phantom in that direction, avoiding obstacles as it flies.
ActiveTrackMark an object on your screen to track it as it moves.
Watch the tutorial in the DJI GO 4 app or on the official DJI website to learn more.Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks. Refer to the Disclaimer and Safety Guidelines for more details.
Manual Takeoff
- Rotating propellers can be dangerous. Do not start the motors when there are people nearby.
- Always keep your hands on the remote controller so long as the motor is still spinning.
- Stop motor mid-flight: Pull the left stick to the bottom inside corner while simultaneously pressing the RTH button. Only stop motors mid-flight in emergency situations when doing so can reduce the risk of damage or injury. Refer to the user manual for details.
Manual Landing
It’s important to understand basic flight guidelines, for the safety of both you and those around you. Don’t forget to read the Disclaimer and Safety Guidelines.
Specifications
Aircraft
| Weight (Battery & Propellers Included) | 1375 g |
| Max Ascent Speed | S-mode: 6 m/s; P-mode: 5 m/s |
| Max Descent Speed | S-mode: 4 m/s; P-mode: 3 m/s |
| Max Speed | 45 mph (72 kph) (S-mode); 36mph (58 kph) (A-mode); 31 mph (50 kph) (P-mode) |
| Max Service Ceiling Above Sea Level | 19685 ft (6000 m) |
| Max Flight Time | Approx. 30 minutes |
| Operating Temperature | 32° to 104° F ( 0° to 40° C) |
| GNSS | GPS+GLONASS |
| Operating Frequency | 2.400 – 2.483 GHz and 5.725 – 5.850 GHz |
| Transmitter Power (LIMP) | 2.4 GHz: C26 dBm (I-CC); C20 dBm (CL); C20 dBm (SRRC) 5.8 GHz:26 dBm (FCC); 14 dBm (CE); 26 dBm (SRRC) |
| Hover Accuracy Range | Vertical: ±0.1 m (With Vision Positioning); ±0.5 m (With GPS Positioning) Horizontal: ±0.3 m (With Vision Positioning); ±1.5 m (With GPS Positioning) |
| Gimbal | |
| Controllable Range | Pitch: -900 to +30° |
| Vision System | |
| Velocity Range | ≥31 mph (50 kph) at 6.6 ft (2 m) above ground |
| Attitude Range | 0 – 33 ft (0- 10 m) |
| Operating Range | 0 – 33 ft (0- 10 m) |
| Obstacle Sensory | 2- 98 ft (0.7 – 30 m) |
| Range Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
| Infrared Sensing System | |
| Obstacle Sensory Range | 0.6 – 23 ft (0.2 – 7 m) |
| Operating Environment | Surface with diffuse reflection material, and reflectivity > 6% (such as wall, trees, humans, etc.) |
| Camera | |
| Sensor | 1″ CMOS; Effective pixels: 20M |
| Lens | FOV (Field of View) 84°. 8.8 mm (35 mm format equivalent: 24 mm). f/2.8 – f/11, auto focus at 1 m – 0.0 |
| ISO Range | Video: 100 – 3200 (Auto); 100 – 6400 (Manual); Photo: 100 – 3200 (Auto); 100 – 12800 (Manual) |
| Mechanical Shutter | 8 – 1/2000 s |
| Electronic Shutter | 8 – 1/8000 s |
| Max Image Size | 3:2 Aspect Ratio: 5472×3648; 4:3 Aspect Ratio: 4864×3648: 16:9 Aspect Ratio: 5472×3078 |
| Still Photography Modes | Single ShotBurst Shooting: 3/5/7/10/14 framesAuto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV BiasInterval: 2/3/5/7/10/15/30/60 s |
| Video Recording Modes | H.265 | H.264 | |
| C4K: | 4096×2160 24/25/30p | C4K: | 4096×2160 24/25/30/48/50/60p |
| 4K: | 3840×2160 24/25/30p | 4K: | 3840×2160 24/25/30/48/50/60p |
| 2.7K: | 2720x 1530 24/25/30/48/50/60p | 2.7K: | 2720×1530 24/25/30/48/50/60p |
| FHD: | 1920×1080 24/25/30/48/50/60/120p | FHD: | 1920x 1080 24/25/30/48/50/60/120p |
| HD: | 1280×720 24/25/30/48/50/60/120p | HD: | 1280×720 24/25/30/48/50/60/120p |
Video Storage Bitrate: 100 MbpsSupported File Systems: FAT32 ( 32 GB); exFAT (> 32 GB)Photo :JPEG, RAW (DNG), JPEG + RAWVideo: MP4/MOV (AVC/H.264; HEVC/H.265)Supported SD Cards: Micro SD, Max Capacity: 128 GB. Class 10 or UHS-1 rating requiredOperating Temperature: 32° to 104° F (0° to 40° C)Remote ControllerOperating Frequency : 2.400 – 2.483 GHz and 5.725 – 5.850 GHzMax Transmission Distance: 2.4 GHz: 5 mi (8 km, FCC); 3.1 mi (5 km, CE); 3.1 mi (5 km, SRRC) (Unobstructed, free of interference) 5.8 GHz: 5 mi (8 km, FCC); 3.1 mi (5 km, CE); 3.1 mi (5 km, SRRC)Operating Temperature 32° – 104° F (0° – 40° C)Battery :6000 mAh LiPo 2STransmitter Power (EIRP): 2.4 GHz: 26 dBm (FCC); 20 dBm (CE); 20 dBm (SRRC 5.8 GHz: 26 dBm (FCC); 14 dBm (CE); 20 dBm (SRRCOperating Voltage : 1.2 A @ 7.4 VCharger
Voltage: 17.4 VRated Power: 100 WIntelligent Flight Battery (PH4-5870mAh-15.2V)Capacity: 5870 mAhVoltage: 15.2 VBattery Type: LiPo 4SEnergy Net: 89.2 WhWeight Charging: 468 gTemperature Range: 41° to 104° F (5° to 40° C)Max Charging Power: 100 W
For online support, please scan this code with Facebook Messenger
Download the user manual for more information: http://www.dji.com/phantom-4-pro-v2This Quick Start Guide is subject to change without prior notice.
PHANTOM is a trademark of DJI.Copyright © 2019 DJI All Rights Reserved.Printed in China.
Phantom 4 Pro V2.0www.dji.com
[xyz-ips snippet=”download-snippet”]