djive 2 in 1 bladeless Tower Fan Air Cleaner User Guide

Table of Contents

2in1 bladelessTower Fan & Air CleanerFor refreshing the air in your home with a cooling effect.

Dear Customer,Your new Flowmate Tower One is about to be used for the first time for refreshing the air in your home. Please take a moment to read this manual to familiarise yourself with your new 2in1 Bladeless Tower Fan. If you have any questions, please contact our customer service. Enjoy every day fresh clean air with a cooling effect with your Flowmate.

NOTICE BEFORE USE

ATTENTIONTo avoid fire, electric shock, and personal injury, please be sure to observe the following requirements. Please follow the relevant national and local electrical regulations:

The appliance is not intended for use by children, elderly or disabled people, or any individual lacking experience and knowledge concerning the use of the fan unless they have been given supervision or instruction by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Please use a separate outlet in accordance with the appliance current. Do not use the socket with other appliances at the same time.
If the fan does not work, the power must be turned off and repaired by qualified personnel.
Do not move the fan when it is plugged in.
When plugging or unplugging the power plug, hold the plug with your hand and do not pull the power cord.
If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not stretch or strain the power cord and keep it away from overheated surfaces.
Do not run the fan on the carpet, and do not cover carpets, other devices or similar materials. The power cord should be kept away from passing areas and placed in areas that it will not be tripped over.
Turn off all functions before unplugging the fan. When it is not in use for a long time, unplug it from the socket. To avoid the risk of tripping, securely store the wires.
Do not put any object on the air inlet or outlet to make sure the air inlet and outlet are free from dust, lint, hair, and any obstacle that may reduce airflow.
The fan should be placed on a non-inclined dry surface with good ventilation, where is away from heat sources and has no surrounding corrosive gas. There should be 30cm of space around the fan to ensure airflow.
It is only intended to be used in a dry place only. It cannot be used outdoors or on a wet surface.
Do not immerse the fan, power cord, or power plug in water or other liquids to avoid danger. For non-professionals, do not use other extension power cords.
Do not use air purifier or similar products directly next to the fan. Do not use any detergent or lubricant on the fan. The plug must be unplugged before cleaning and maintenance.

ATTENTIONTo ensure proper usage and maintenance of the fan, please read the instruction manual carefully before use and take good care of this manual for future reference. DANGERIf the dangerous situation is not avoided, this can lead to death or serious injuries. ATTENTIONIf the dangerous situation is not avoided, this can lead to serious injuries.

Symbol indicates “prohibited”

The symbol indicates “force” (please act carefully)

General safety information:

Examine the device for any visible external damages prior to using it. Never put a damaged device into operation. Contact the dealer if needed.
Persons, who are not able to operate the device because of any decree- sed physical, mental abilities may only use the device under the supervision or under the instructions of a responsible person.
Do not permit children to use the device, unless they are supervised.
Only qualified electricians, who have been trained by the manufacturer, may carry out any repairs that may be needed. Improperly performed repairs can cause considerable dangers for the user.

DANGER

Only qualified electricians, who have been trained by the manufacturer, may carry out any repairs that may be needed. This appliance is used in the household only. Please use a separate outlet in accordance with the appliance current/voltage. Don’t use more than one electrical appliance at the same time on the same outlet. Do not pull the power cord to remove the plug from the mains socket. Do not use the appliance if the power cord or mains plug is damaged. Do not open the housing of the appliance. Danger from electric current if live connections are touched and/or the electrical and mechanical configuration is changed. Never immerse the appliance or the power cord into water or other liquids. Do not touch the power cord with wet hands when disconnecting the appliance from the mains supply. This appliance may be used by children under the age 8 years and by persons with decreased physical, sensory or mental abilities or lack of experience and/or knowledge only if they are supervised or were instructed on using the appliance and have understood the resulting dangers. Cleaning or maintenance may not be performed by children who are not under supervision. Children must be supervised to ensure that they do not play with the appliance. Store the appliance and accessory parts out of the reach of children.

DANGER – RISK OF FIRE Never cover the appliance when it is in operation. Do not put the appliance in the vicinity of easily inflammable materials such as paint, varnish or gas. Allow a gap of at least 1 m between the fan and all flammable and heat-sensitive materials (furniture, curtains, paper, clothes etc.). Immediately disconnect the power plug from the electrical outlet and stop using it when finding (abnormal noise • burnt odor etc.). If you continue to use it while it remains abnormal, there is a risk that leads to smoke or fire, electric shock, or injury. Please consult your dealer. During use, when the power plug or power cord becomes abnormally hot, it is at the risk of fire. Please shut off the device. Please clean the plug regularly with a dry cloth, otherwise dirty or dusty plug may cause defective insulation and cause a fire. DANGER – SMALL CHILDREN It must be ensured at all times that children and infants do not play with the appliance.

ATTENTIONPlace the appliance on a firm, dry, flat and waterproof surface.Do not install the appliance in a hot, wet or very humid environment.Never place the appliance or parts of the appliance in the vicinity of strong heat sources and hot surfaces (e.g., heating, oven, and grill).Do not place the fan in a narrow place, a corner or in narrow areas between furniture. Allow sufficient space around it so that the air can circulate fully.The appliance becomes very hot during operation. Therefore, do not touch the hot surfaces of the appliance during operation and for a short time afterward.Wait until the appliance has cooled down before transporting it.Do not spray air freshener into the airflow.Do not place the appliance in front of an automatic air freshener system.Always turn off the power button at the control panel and wait for it to stop running before unplugging it from the power socket.Do not put objects into the openings or ventilation grilles.Keep the appliance free from dust, hair and above all, anything that could restrict the airflow.

PRODUCT OVERVIEW \\\

PRIOR TO FIRST USE \\\

Place of operation

The fan shall be put in a leveled place. Please don’t place the fan in unstable places, such as slopes, soft surfaces to prevent the fan from tipping over and causing damage or malfunction.
Avoid blocking the air inlet in use. Keep the fan away from curtains when it is plugged in to prevent the curtain from blocking the air inlet.
Don’t place objects within 30 cm in front of the outlet.

Battery replacement for the remote control ATTENTION Do not recharge this battery Keep the battery out of reach of children. If swallowed, please go to the hospital promptly. Remove the battery if the device is not used for a longer time.

Please pay attention to the direction the battery faces while replacing it.

OPERATING INSTRUCTIONS \\\

When operating the fan with remote control, we suggest aiming the remote at the receiver on the front side of the fan to achieve the best control signal.

The following cases may occur when operating the fan

This fan may work when using the remote control of other electrical appliances.
Other appliances may work when using the remote control of this fan This is due to the overlap of the frequency of the remote control, not a malfunction of the appliance. Please keep this remote control away from other appliances while using it to avoid misfunctions.

Operation

Insert the power plug into the socket
The LED display will turn on.

Remote controlAll available functions can be operated with the remote control.

	ON / OFFTurn the power on/off
	Speed levelsIncrease (+) or decrease (-) theairspeed to 9 levels in total
	Timer functionSet a shutdown timer (1 – 8 h)
	Sleep modeChange to a very slow airspeed
	MAX modeSet the airspeed tomaximum output
	Panoramic modeStart/Stop the 80°-panning

Operating functions

	ON / OFFTurn the power on/off
	ON: Press the LED display while the device is turned off to start it with the initial settings.OFF: Press the LED display for 2 seconds and remove the finger after hearing two notification sounds to turn it off.
	The power is controllable via the button on the remote control.
ATTENTIONPressing the power button will not shut off the device completely.If you do not use the fan for a long time, unplug the power plug.
	Speed levelsIncrease (+) or decrease (-) the airspeed to 9 levels in total
	Timer functionSet a shutdown timer (1 – 8 h)
	Press the button to set the timer from 1 to 8 hours.The number on the LED display (0-8) indicates the set hours.Setting it to 0 disables the timer (two notification sounds). The other functions of the fan still can be used after the timer function is set. The machine will shut down when the set time is up. If the fan power is turned off manually, the timer settingwill also be canceled.

	Sleep modeChange to a very slow airspeed
	Press the button on the remote control to start/stop the Sleep mode. A notification (L) will appear/disappear on the LED display. Pressing either the (+) or minus (-) button will cancel the Sleep mode.
	MAX modeSet the airspeed to maximum output.
	Press the button on the remote control to start/stop the Sleep mode. A notification (H) will appear/disappear on the LED display. Pressing either the (+) or minus (-) button will cancel the MAX mode.
	Panoramic modeStart/Stop the 80°-panning
	ON: Press the LED display for 1 second to start the panning.OFF: Press the LED display for 1 second and remove the finger after hearing the notification sound to stop the panning.
	The Panoramic mode is controllable via the button on the remote control.

Sound signalA notification sound will play whenever the LED touch display or the remote control is used.

CARE & MAINTENANCE \\\

ATTENTIONDon’t splash water on the fan. It may damage the fan. Please don’t use banana oil, gasoline, alcohol, bleach or metal object to clean the surface of the fan. Otherwise, it may discolor or deteriorate the surface of the fan.

Cleaning the applianceFan SurfacePlease gently wipe the surface with a clean soft cloth. If the fan surface is dirty, you can use a mild detergent after diluting it with a wet cloth to wipe the fan surface. Wipe it with a soft dry cloth after.Air Inlet & Air OutletUse a soft brush or a vacuum cleaner to clean the dust around the air inlet and the air outlet. Dust accumulation would affect the operation of the fan. Please clean the fan timely.

Power PlugPlease clean the power plug with a dry soft cloth.Remote ControlWipe the remote control surface gently with a dry, soft cloth. Remove the battery of the remote control if it is not to be used for a long time.

Changing the HEPA filter

Make sure your appliance is switched off unplugged.
Press gently on the far left side of the filter case cover to remove it.
Remove the old filter and replace it with a new one.(Sold separately)
Put the cover back on the filter case. Please make sure that the magnets on the cover and the case are aligned.

ATTENTION – Storage

Place the fan in a large plastic bag for dust protection aftercare and maintenance.
Please avoid unstable places and electrical appliances with refrigeration/heating functions.
Avoid placing it in direct sunlight, hot and wet places.
Please store the fan in a clean and dry place.
Please place it where children can’t touch it.

TROUBLESHOOTING \\\

ATTENTIONIf an abnormal situation occurs, please check the following instructions and contact customer service if the problem remains. DANGERPlease don’t disassemble and repair the fan without authorization.

Problem	Possible cause and solution
The device is plugged in but won’t function.	Is the power plug properly connected?Is the power indicator on?If not, check if there is a power outage.
The remote control does not work.	Is the battery empty? Please replace it with a new one. (refer to page 13)
Is the battery installed properly? Please check if it’s facing the right side. (refer to page 13)
Is the remote control aimed at the LED display of the fan? (refer to page 14)

TECHNICAL SPECIFICATIONS \\\

FLOWMATE tower one
Model	DJ50000 / DJ50001 / DJ50002 (SKJ-CR013F)
Voltage	24 V≈
Power	35 W
Panning range	80°
Timer range	1 to 8 hour
HEPA filter	HEPA 12; filters < 99,5% of particles from the air
Dimensions	(H) 1047 mm; (W) 215 mm; (D) 215 mm
Net weight	4,7 kg

App and AlexaThis device can be operated via Smartphone and Amazon Alexa.For instructions on how to download and operate the app, please visit www.djive.euSupport serviceIf the device should ever completely fail to operate, please contact us via mail first. (refer to page 3) We will try our hardest to either fix your appliance or to provide a new Flowmate Tower to you.

www.djive.eu flowmateAN#: DJ50000; DJ50001; DJ50002 \\\ Product: DC 24, 35 W \\\