Dr Trust 301 Anti Decubitus Air Mattress Bubble User Guide

Dr. TrustAnti Decubitus Air Mattress Bubble — 301

QUICK STARTUP GUIDE

Step 1 Unfold the mattress on the bed and connect the power cord to an electrical outletStep 2 Fix up the compressor pump and connect the mattress feed pipes.Step 3 Turn the control knob to switch on the pump.Step 4 Air mattress starts inflation. When the airbed is fully inflated, turn off the pump by turning the control knob to the off position.Step 5 Pull out the mains plug and store it in its storage compartment.

https://drtrust.in/pages/301

INTRODUCTION

The Dr Trust Anti Decubitus Air Mattress Bubble — 301 is a medical device intended to be used as an air support surface system for the prevention and treatment of bedsores resulting from prolonged pressure on the skin. It comes with a well-powered pump that inflates and deflates the mattress with zero fuss. The pump is highly efficient and works quietly with a small size compressor. The mattress is strategically designed for long-lasting performance by using PVC 0.32 mm material which is durable and lightweight. The continuous inflation and deflation process lessen the pressure on patients’ skin and prevent the development of pressure ulcers. Through a simple to use control button, it is easy to set the level of pressure as per the patients comfort. It can maximally be loaded with 135 kg.

PRINCIPLE OF OPERATION

The bed-type medical mattress relieves pressure by sequentially deflating and inflating alternate air cells. The continuous movement supplied by the unit lessens the areas of constant pressure and enhances circulation.

• Alternating the pressure at a sufficient rhythm avoids prolonged vascular compression which is likely to cause tissue hypoxia.
• Alternating pressure adapts the mattress to the patient’s and their position.

GUIDELINES FOR USE

The traditionally accepted method of pressure sore control is to turn the bedridden patient at regular intervals and to observe the areas of risk regularly. Alternating pressure mattress is intended to compliment this treatment, observation of the patient and turning when necessary should still I be considered as part of the treatment

General UseDr. Trust Air Mattress is designed to cure bedsores in patients with prolonged bed rest. Its alternating pressure relief bubble pad system refrains a patient’s muscle from the long-term pressure and prevents skin breakdown. Its durability makes it ideal not only for home use but also for hospitals

• For patients who are likely to spend more than hours per day in bed.
• For patients who are classed as medium to high risk of developing pressure ulcers.

IMPORTANT SAFETY NOTES

• Adult supervision is needed to avoid serious injury during inflation, deflation, and maintenance of air mattress
• This is an electrical product so it should not be placed where small children can reach it.
• Do not use the pump in or around water to avoid the risk of fire, burns, injury, and shock.
• If the power cord is damaged, it must be replaced immediately to avoid a hazard.
• Pump is not intended for continuous use. It may stop working or overheat if it is used for an extended period.
• Once the pump is overheated, let it rest for 30 minutes for restart.
• Do not attempt to disassemble, repair, or service the pump.
• Keep the electric pump of the air mattress on for 23 hours and keep it off for 1 hour.
• Do not stand on the air mattress.
• Do not keep the mattress on the heated surface.
• Do not use it in the presence of flammable anesthetics as an explosion could happen.
• Do not smoke near the air mattress and pump.

https://drtrust.in/pages/301

• Do not use the air mattress near an open flame or very near to a heater.
• Keep sharp objects away from the air mattress.
• Do not twist and bend the mattress
• Maximum weight-bearing capacity is 135 kg; therefore, the attendants should not sit on the air mattress as this will cause the mattress to leak.

MAIN COMPONENTS

It consists of a mattress, a pump, an attached power cord, a power cord compartment, and a pressure adjustment dial.

SET UP GUIDE

• Remove the air mattress and its pump from the packaging and unfold them so that the felt side is facing up.
• Open the power cord compartment and connect the power cord to an electrical outlet.

OPERATION

1. Unroll the mattress
2. Position and secure it on the bed.
3. Hang the compressor pump of the mattress with the help of an integrated hook at the foot side of the bed frame.
4. Connect one end of the air tubes with the air pump and the other end with the air mattress. Connect them firmly at both ends.
5. Connect the electrical power supply cable to the compressor (pump).
6. Guide it along the bed to the mattress plug socket and plugin.
7. Press switch to turn on the compressor (pump). It will take around 12-15 mins to inflate.
8. Before positioning the patient onto the mattress, wait until the mattress has been fully inflated.
9. Select the pressure corresponding to the patient’s morphology.

MODE OF AIR FILL 

MAINTENANCE AND STORAGE

• Do not let the surface of mattress gets wet and repeated exposure to water or other liquids may damage it early.
• You may wipe clean it onlywith a damp cloth.
• Use a mild detergent or any other cleaners to remove stains.
• Do not use strong chemicals or other compounds.
• Ensure the mattress is completely deflated before storage.
• Allow it to air dry completely after cleaning and before storing.
• It should be stored with the valve closed.
• Always keep the pump away from water and damp surfaces as humidity will deteriorate the product.
• Store the air mattress in a breezy room wherein the relative temperature is not more than 80% and without direct sunlight or corrosive gas.
• Do not store it near to sharp objects.

CLEANING / DISINFECTION

• Do take care to disconnect from the electrical supply before attempting to clean.
• Do take care to use a cloth impregnated with a mild detergent solution.
• Do take care not to exceed manufacturers recommendations before wiping off cleaning solution.

SPECIFICATIONS

Mattress Characteristics

report this ad

Compressor (pump) Characteristics

CUSTOMER SUPPORT

CONTACT ADDRESSUSANutricia INC.USA276 5th Avenue, Suite 704-39ZNew York (NY) – 10001, USAINDIACorporate Office (Mumba)Nureca Limited128 Gala Number Udyog Bhavan, 1st Floor Sonawala Lane, Goregaon East Mumbai City Maharashtra 400063Contact us India: +91-7527013265 /+91-9356658436Website: www.drtrust.inCorp Website:www.nureca.comEmail: [email protected]Connect with us on social networksFacebook: @drtrustInstagram: @drtrustisinYoutube: NurecaUsaCOPYRIGHT02021 NURECA LTD ALL RIGHTS RESERVEDScan to view Product Demo Video www.drtrusa.com/301