Dr Trust Electric Feeding Bottle Warmer, Food Heater & Sterilizer for Babies – 7001 User Manual

Bottle Warmer- 7001User Manual

https://drtrust.in/pages/7001

Scan to ViewProduct Demo Videowww.drtrustusa.com/7001

Congratulations on your purchase of the Dr Trust Baby Bottle Warmer-7001. Please read the instructions manual carefully for using the bottle warmer correctly.

INTRODUCTION

Dr Trust Baby Bottle Warmer is designed to warm baby bottles and food items conveniently. It comes with a new temperature control system to fulfill the baby food warming demands with the highest safety and hygiene.The movable control knob allows you to set the correct temperature as per your preference. It is a high-performance warmer that fits baby bottles and food cup easily. This is an electric device designed to be used in households. If you do not take appropriate preventive measures, it will result in serious personal injury or property damage. So, when using it, basic safety precautions should always be followed including the following;

PRECAUTIONS

Warning

Be careful with its operations as execution errors can cause significant problems.

Danger

Notice

• Make sure the bottle warmer should have water during the operating process. Dry burning is forbidden.
• Please check food temperature and blend it before feeding babies.
• Don’t heat for a long time to avoid nutrition loss.
• A child cannot use this product.
• Close supervision is necessary when any appliance is used near children.
• Do not touch hot surfaces instead use handles or knobs.
• Don’t put an electric wire somewhere babies and children can touch.
• Persons who are physically or mentally handicapped or lack experience and knowledge must operate the product under the supervision and guidance of those who have gained experience in the safe use of the appliance,.

If the mains cord is damaged, it must be replaced by a professional in order to avoid danger.

• Before connecting the product to the power supply, be sure to check that the supply voltage indicated on the product matches the supply voltage.
• The product’s power plug must be plugged into a grounded receptacle and be sure it is securely inserted.
• Do not expose the power cord or plug to hot surfaces and sharp corners.
• Do not use this product if the plug, power cord, or the product itself is damaged.
• When not using it, please unplug the power, clean and dry it for safe storage.
• This appliance can be used by children aged 3 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be made by children unless they are aged 8 years and above and
• Keep the appliance and its cord out of reach of children aged less than 3 years.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Mothers should test the food temperature before feeding to make sure it is proper and avoid scalding babies.

COMPONENTS AND INSTRUCTIONS

Please check component quantity before use it. Contact seller if lack of components.

No.	Name	Material	Heat	Cold	Quantity
A	Food Lid	PP	120°C	-20°C	1
B	Food Bowl	PP	120°C	-20°C	1
C	Liner	Stainless steel	/	/	1
D	Shell	PP	120°C	-20°C	1
E	Rotated Switch	ABS	80°C	-20°C	1
F	Bottom Cover	PP	120°C	-20°C	1
Manual	1

Tips

• To provide better food for babies, don’t put food in a bottle warmer for long time.
• Don’t keep milk in a bottle warmer for over 2 hours, otherwise, milk will loss nutrition.
• If you need to prepare warm milk for babies anytime, we suggest adding water to the bottle. When feeding babies, add milk powder and blend it.
• Speed heat method: Turn the switch to or for about 4 mins, then turn to, after 1 mins milk will reach a suitable temperature.

(Please test feed temperature before feeding babies.)

MILK WARMING METHOD

• Wash the container before use to ensure hygiene.
• Place the warmer in a horizontal position. Do not tilt it and place the bottle with water or milk in the container. (Note: The bottle should not be dry heat).
• Add the appropriate amount of pure water into the container (The water level should be like that it does not make the bottle float appropriate).
• Turn on the power, turn the knob to start to warm milk, the indicator light is on and off alternating normal state (marked warmer is automatically adjust the temperature, so that food is more uniform heat absorption, and does not destroy the nutrients.

• The heating process, the indicator light turns on and off 4-5 times to reach constant temperature.
• When not in use, turn the knob to the OFF position and unplug the power outlet.
• Test temperature before feeding.

FOOD HEATING METHOD

• Add appropriate pure water into the container (Water level can’t reach liner mouth).
• Put the food bowl with food into a container and cover the food lid. (Note: Food bowl can’t dry heat).
• Connect the power, turn the knob to start heating food, the indicator light on and off is a normal situation. (Means bottle warmer is automatically adjusted the temperature, keeps food endothermic more evenly and fully, and does not lose nutrition.)
• During the heating process, indicator light change (ON/OFF) for 4­5 times can reach constant temperature conditions.
• When not in use, turn the knob to the OFF position and unplug the power outlet.
• Test temperature before feeding.

SIMPLE STERILIZE METHOD

• Clean the container before use to make sure
• Add appropriate pure water into the container (Water level can’t reach liner mouth).

PRECAUTIONS FOR CLEANING

• Please disconnect power and wait for warmer cool before cleaning it.
• Don’t immerse base into water.
• Only use a clean cloth to wipe it.
• Do not use corrosive detergents, chemical abrasive cleaning agents or hard metal wire mesh brush for cleaning.
• Food Bowl and Food Lid can be cleaned with detergent.
• To avoid scale, please use pure water.
• If have scale, add scale cleaning agent or acetic acid with water into the container and connect the power supply. Switch ON to and heat for 5 mins then turn off.
• Disconnect the power supply. Then use bottle brush to clean it after the machine cooled.

TECHNICAL SPECIFICATION

Name	OR Trust Bottle Mower
Model	70W
Humidity	50%-80%
Rated power	220W
Pow Supply	220-240V 50/60 It
Ran temperature	15°C-30°C

NON-WARRANTY

Improper use, or misuse, and man-made damage. Damage due to natural disasters and other force majeure clause.

CUSTOMER SUPPORT

CONTACT ADDRESSUSANureca INC.USA276 5th Avenue, Suite 704-397,New York (NY) – 10001, USAINDIACorporate Office (Mumbai)Nureca Limited 82-166, Time Square, 7th and 8th Floor, CTS No 349 and349-1Western Express Highway, Andheri East Mumbai, Mumbai City, Maharashtra, 400069Contact us India: +91-7527013265 /+91-9356658436Website: www.drohvs.io Email: [email protected]Connect with us on social networksFacebook: drphysiousaInstagram: drphys.ioYoutube: NurecaUsaCOPYRIGHT02020 DR PHYSIO. ALL RIGHTS RESERVED