DrayTek Vigor2866 Series Wired G.Fast DSL and Ethernet Router User Guide

Table of Contents

Vigor2866 Series Wired G.Fast DSL and Ethernet Router

Vigor2866 Series G. Fast Security FirewallQuick Start Guide (for RF Model)Version: 1. 0_(03) Firmware Version: V4. 2. 2 (For future update, please visit DrayTek web site)Date: March 12, 2021ii

Intellectual Property Rights (IPR) Information

Copyrights Trademarks

© All right s reserved. This publicat ion cont ains inf ormat ion t hat is prot ect ed by copyright . No part may be reproduced, t ransmit t ed, t ranscribed, st ored in a ret rieval syst em, or t ranslat ed int o any language wit hout writ t en permission f rom t he copyright holders.The f ollowing t rademarks are used in t his document : Microsof t is a regist ered t rademark of Microsof t Corp. Windows 8, 10 and Explorer are t rademarks of Microsof t Corp. Apple and Mac OS are regist ered t rademarks of Apple Inc. Ot her product s may be t rademarks or regist ered t rademarks of t heirrespect ive manuf act urers.

Safety Instructions and Approval

Safety InstructionsWarranty

Read t he inst allat ion guide t horoughly bef ore you set up t he rout er. The rout er is a complicat ed elect ronic unit t hat may be repaired only beaut horized and qualif ied personnel. Do not t ry t o open or repair t he rout er yourself . Do not place t he rout er in a damp or humid place, e. g. a bat hroom. Do not st ack t he rout ers. The rout er should be used in a shelt ered area, wit hin a t emperat ure range of +5 t o +40 Celsius. Do not expose t he rout er t o direct sunlight or ot her heat sources. The housing and elect ronic component s may be damaged by direct sunlight or heat sources. Do not deploy t he cable f or LAN connect ion out door t o prevent elect ronic shock hazards. Keep t he package out of reach of children. When you want t o dispose of t he rout er, please f ollow local regulat ions on conservat ion of t he environment .We warrant t o t he original end user (purchaser) t hat t he rout er will be f ree f rom any def ect s in workmanship or mat erials f or a period of t wo (2) years f rom t he dat e of purchase f rom t he dealer. Please keep your purchase receipt in a saf e place as it serves as proof of dat e of purchase. During t he warrant y period, and upon proof of purchase, should t he product have indicat ions of f ailure due t o f ault y workmanship and/ or mat erials, we will, at our discret ion, repair or replace t he def ect ive product s or component s, wit hout charge f or eit her part s or labor, t o what ever ext ent we deem necessary t ore-st ore t he product t o proper operat ing condit ion. Any replacement will consist of a new or re-manuf act ured f unct ionally equivalent product of equal value, and will be of f ered solely at our discret ion. This warrant y will not apply if t he product is modif ied, misused, t ampered wit h, damaged by an act of God, or subj ect ed t o abnormal working condit ions. The warrant y does not cover t he bundled or licensed sof t ware of ot her vendors. Def ect s which do not signif icant ly af f ect t he usabilit y of t he product will not be covered by t he warrant y. We reserve t he right t o revise t he manual and online document at ion and t o make changes f rom t ime t o t ime in t he cont ent s hereof wit hout obligat ion t o not if y any person of such revision or changes.

Declaration of Conformity

Hereby, DrayTek Corporat ion declares t hat t he radio equipment t ype Vigor2866 is in compliance wit h Direct ive 2014/ 53/ EU.

The f ull t ext of t he EU Declarat ion of Conf ormit y is available at t he f ollowing int ernet address:

ht t p: / / www. drayt ek. com. t w/ f t p/ Vigor2866/ Document / CE/

Manuf act urer: DrayTek Corp.

Addr ess:

No. 26, Fu Shing Road, HuKou Township, HsinChu Indust rial Park, Hsin-Chu Count y,

Taiwan 303

Product :

Vigor2866 Series

Frequency Inf ormat ion f or Europe area:

2. 4G WLAN 5G WLAN

2412MHz – 2472 MHz, max. TX power: 19. 98dBm *1

5160MHz – 5340 MHz, max. TX power: 22 dBm

5480MHz – 5720 MHz, max. TX power: 27 dBm

(*1: f or 2. 4G WLAN model; *2: f or 5G WLAN model)

This product is designed f or DSL and 2. 4GHz / 5GHz WLAN net work t hroughout t he EC region.

Regulatory Information

Federal Communicat ion Commission Int erf erence St at ementThis equipment has been t est ed and f ound t o comply wit h t he limit s f or a Class B digit al device, pursuant t o Part 15 of t he FCC Rules. These limit s are designed t o provide reasonable prot ect ion against harmf ul int erf erence in a resident ial inst allat ion. This equipment generat es, uses and can radiat e radio f requency energy and, if not inst alled and used in accordance wit h t he inst ruct ions, may cause harmf ul int erf erence t o radio communicat ions. However, t here is no guarant ee t hat int erf erence will not occur in a part icular inst allat ion. If t his equipment does cause harmf ul int erf erence t o radio or t elevision recept ion, which can be det ermined by t urning t he equipment of f and on, t he user is encouraged t o t ry t o correct t he int erf erence by one of t he f ollowing measures:Reorient or relocat e t he receiving ant enna.Increase t he separat ion bet ween t he equipment and receiver.Connect t he equipment int o an out let on a circuit dif f erent f rom t hat t o which t he receiver is connect ed.Consult t he dealer or an experienced radio/ TV t echnician f or help.

This device complies wit h Part 15 of t he FCC Rules. Operat ion is subj ect t o t he f ollowing t wo condit ions:(1) This device may not cause harmf ul int erf erence, and(2) This device may accept any int erf erence received, including int erf erence t hat may cause undesired operat ion.

User Manual Inf ormat ion Agreement

This equipment complies wit h Part 68 of t he FCC rules. Locat ed on t he equipment is a label t hat cont ains, among ot her inf ormat ion, t he ACTA regist rat ion number and ringer equivalence number (REN. ) If request ed, t his inf ormat ion must be provided t o t he t elephone company.

The REN is used t o det ermine t he quant it y of devices which may be connect ed t o t he t elephone line. Excessive REN’ s on t he t elephone line may result in t he devices not ringing in response t o an incoming call. In most , but not all areas, t he sum of t he REN’ s should not exceed f ive (5. 0). To be cert ain of t he number of devices t hat may be connect ed t o t he li ne, as det ermined by t he t ot al REN’ s cont act t he t elephone company t o det ermine t he maximum REN f or t he calling area.

This equipment cannot be used on t he t elephone company-provided coin service. Connect ion t o Part y Line Service is subj ect t o St at e Tarif f s.

If t his equipment causes harm t o t he t elephone net work, t he t elephone company will not if y you in advance t hat t emporary discont inuance of service may be required. If advance not ice isn’ t pract ical, t he t elephone company will not if y t he cust omer as soon as possible. Also, you will be advised of your right t he f ile a complaint wit h t he FCC if you believe it is necessary.

The t elephone company may make changes in it s f acilit ies, equipment , operat ions, or procedures t hat could af f ect t he operat ion of t he equipment . If t his happens, t he t elephone company will provide advance not ice in order f or you t o make t he necessary modif icat ions in order t o maint ain unint errupt ed service.

If t rouble is experienced wit h t his equipment , please cont act :

Company Name: ABP Int ernat ional Inc.

Addr ess:

13988 Diplomat Drive Suit e 180 Dallas TX75234

TEL:

1-972-831-1600

FAX:

If t he t rouble is causing harm t o t he t elephone net work, t he t elephone company may request you t o remove t he equipment f rom t he net work unt il t he problem is resolved.

This equipment uses t he f ollowing USOC j acks: RJ11

It is recommended t hat t he cust omer inst all an AC surge arrest er in t he AC out let t o which t his device is connect ed. This is t o avoid damaging t he equipment caused by local light ening st rikes and ot her elect rical surges.

iii

USA Local Represent at ive

Company name Ad d r ess ZIP Code Cont act Person

ABP Int ernat ional Inc.

13988 Diplomat Drive Suit e 180 Dallas TX 75234

75234

E-mail rmesser@abpt ech. com

Mr. Robert Messer Tel.

19728311600

Caut ion:Any changes or modif icat ions not expressly approved by t he grant ee of t his device could void t he user’s aut horit y t o operat e t he equipment .Any changes or modif icat ions not expressly approved by t he part y responsible f or compliance could void t he user’s aut horit y t o operat e t his equipment .This t ransmit t er must not be co-locat ed or oper at ing in conj unct ion wit h any ot her ant enna or t ransmit t er.Radiat ion Exposure St at ement : This equipment compli es wit h FCC radiat ion exposure limit s set f ort h f or an uncont rolled environment . This equipment should be inst alled and operat ed wit h minimum dist ance 20cm bet ween t he radiat or & your body.The ant enna/ t ransmit t er should be kept at least 20 cm away f rom human body.

External Power Supply ErP Information

A Manuf act urer

CWT

APD

B Address

No. 222, Sec. No. 222, Sec. No. 222, Sec. No. 222, Sec. No. 222, Sec. No. 5, Lane 83, No. 5, Lane 83, No. 5, Lane 83, No. 5, Lane 83,

2, Nankan Rd. , 2, Nankan Rd. , 2, Nankan Rd. , 2, Nankan Rd. , 2, Nankan Rd. , Lung-Sou St . , Lung-Sou St . , Lung-Sou St . , Lung-Sou St . ,

Luj hu

Taoyuan Cit y Taoyuan Cit y Taoyuan Cit y Taoyuan Cit y

Tow nshi p ,

Township, 330, Taiwan 330, Taiwan 330, Taiwan 330, Taiwan

Taoyuan

Count y 338, Count y 338, Count y 338, Count y 338, Count y 338,

Tai w an

C Model ident if ier

2ABB012F UK 2ABB018F UK 2ABL024F UK 2ABL030F UK 2ABN036F UK WA-12M12FG WB-18D12FG WA-24Q12FG WA-36A12FG

2ABB012F EU 2ABB018F EU 2ABL024F EU 2ABL030F EU 2ABN036F EU WA-12M12FK WB-18D12FK WA-24Q12FK WA-36A12FK

D Input volt age

100~240V

E Input AC f requency

50/ 60Hz

Out put volt age DC

12. 0V

F Out put current

1. 0A

1. 5A

2. 0A

2. 5A

3. 0A

1. 0A

1. 5A

2. 0A

3. 0A

G Out put power

12. 0W

18. 0W

24. 0W

30. 0W

36. 0W

12. 0W

18. 0W

24. 0W

36. 0W

H Average act ive

84. 9%

86. 2%

87. 6%

87. 8%

89. 8%

83. 7%

85. 4%

88. 6%

88. 2%

ef f i ci ency

I Ef f iciency at low load

73. 6%

78. 0%

81. 3%

83. 3%

83. 7%

74. 5%

80. 5%

86. 4%

85. 4%

10%

J No-load power

0. 07W

0. 10W

0. 07W

0. 10W

consumpt ion

Ext ernal power supply (Power Adapt er) inf ormat ion. For more updat e, please visit www. drayt ek. com.

Table of Contents1. Package Content …………………………………………………………………………………….. 1 2. Panel Explanation……………………………………………………………………………………. 22.1 Vigor2866ac / Vigor2866 ax…………………………………………………………………………………………….. 2 2.2 Vigor2866Vac/Vigor2866FVax ……………………………………………………………………………………… 63. Hardware Installation ………………………………………………………………………………. 93.1 Network Connection ……………………………………………………………………………………………………. 9 3.2 Wall-Mounted Installation …………………………………………………………………………………………… 104. Software Configuration ……………………………………………………………………………114.1 Quick Start Wizard for Network Connection……………………………………………………………………115. Customer Service ………………………………………………………………………………….. 17Be a Registered Owner …………………………………………………………………………………………………… 17 Firmware & Tools Updates ………………………………………………………………………………………………. 17v

1. Package ContentTake a look at t he package cont ent . If t here is anyt hing missed or damaged, please cont act DrayTek or dealer immediat el y. Besides, t he cont ent is subj ect t o t he real package.

Vigor Router

orAntenna (wireless models)

RJ-45 Cable (Ethernet)

RJ-11 to RJ-11 Cable or RJ-11 to RJ-45 Cable

Quick Start GuideThe t ype of t he power adapt er depends on t he count ry t hat t he rout er will be inst alled. * The maximum power consumpt ion is 28 Wat t .

UK-type Power Adapter

EU-type Power Adapter

USA/Taiwan-type Power Adapter

AU/NZ-type Power Adapter

2. Panel Explanation2.1 Vigor2866ac / Vigor2866 ax

No. LED ACT WAN2 QoS USB DSL(1) WCF2.4G/ 5GDMZ

St at us Of f Bl i nki ng On Of f Bl i nki ng On Of f On Of f Bl i nki ng OnBl i nki ngOn Of fOnOf fBl i nki ngOn Of f Bl i nki ng

Explanat ion The rout er is powered of f . The router is powered on and running normally. Int ernet connect ion is ready. Int ernet connect ion is not ready. The dat a is t ransmit t ing. The QoS f unct ion is act ive. The QoS f unct ion is inact ive. USB device is connect ed and ready f or use. No USB device is connect ed. The dat a is t ransmit t ing.The rout er is ready t o access Int ernet t hrough DSL link. Slowl y: The DSL connect ion is ready. Quickly: The connect ion is t raining. The Web Cont ent Filt er is act ive. (It is enabled f rom Firewall >> General Setup). WCF is disabled. 2. 4G/ 5G: Wireless access point wit h bandwidt h of 2. 4GHz/ 5GHz is ready. WLAN: Wireless access point is ready. Wireless f unct ion is disabled. It will blink slowl y while wireless t raf f ic goes t hrough. ACT and WLAN LEDs bl ink quickly and simult aneously when WPS is working, and will ret urn t o normal condit ion af t er t wo minut es. (You need t o set up WPS wit hin 2 minut es. )The DMZ f unct ion is enabled. The DMZ f unct ion is disabled. The dat a is t ransmit t ing.2

WAN2 / P6Lef t LEDRight LED (2)LAN P1-P5Lef t LEDRight LED

On Of f Bl i nki ng On Of fOn Of f Bl i nki ng On Of f

The port is connect ed. The port is disconnect ed. The dat a is t ransmit t ing. The port is connect ed wit h 1000Mbps. The port is connect ed wit h 10/ 100Mbps.The port is connect ed. The port is disconnect ed. The dat a is t ransmit t ing. The port is connect ed wit h 1000Mbps. The port is connect ed wit h 10/ 100Mbps

No. InterfaceWireless LAN ON/ OFF/ WPS (3)Fact ory Reset

DescriptionWireless band will be swit ched / changed according t o t he but t on pressed and released. For example, 2. 4G (On) and 5G (On) in def ault . 2. 4G (Of f ) and 5G (On) pressed and released t hebut t on once. 2. 4G (On) and 5G (Of f ) pressed and released t hebut t on t wice. 2. 4G (Of f ) and 5G (Of f ) pressed and released t hebut t on t hree t imes.When WPS f unct ion is enabled by web user int erf ace, press t his but t on f or more t han 2 seconds t o wait f or client ‘ s device making net work connect ion t hrough WPS.Rest ore t he def ault set t ings. Usage: Turn on t he rout er (ACT LED is blinking). Press t he hole and keep f or more t han 5 seconds. When you see t he ACT LED begins t o blink rapidly t han usual, release t he but t on. Then t he rout er will rest art wit h t he f act ory def ault conf igurat ion.

(4)

USB1~2 / USB

Connect er f or a USB device (f or 3G/ 4G USB Modem or print er or t hermomet er).

(5) WAN2 / P6

Connect er f or local net work devices or modem f or accessing Int ernet .The port ” WAN2 / P6″ is swit chable. It can be used f or LAN connect ion or WAN connect ion according t o t he set t ings conf igured in WUI.

LAN P1-P5

Connect ers f or local net work devices.

DSL (6)PWR (7)ON/ OFF

Connect er f or accessing t he Int ernet . Connect er f or inst alling WLAN ant ennas. (For ac model) Connect er f or a power adapt er. Power Swit ch.

2 .2 V igor2 8 6 6 V a c /V igor2 8 6 6 FV a x

No. LED ACT WAN2 QoS USBDSL (1)Phone1/ 2 2.4G/ 5G

St at us Of f Bl i nki ng On Of f Bl i nki ng On Of f On Of f Bl i nki ngOnBl i nki ngOn Of f Bl i nki ng OnOf f Bl i nki ng

Explanat ion The rout er is powered of f . The rout er is powered on and running normally. Int ernet connect ion is ready. Int ernet connect ion is not ready. The dat a is t ransmit t ing. The QoS f unct ion is act ive. The QoS f unct ion is inact ive. USB device is connect ed and ready f or use. No USB device is connect ed. The dat a is t ransmit t ing. The rout er is ready t o access Int ernet t hrough DSL link. Slowly: The DSL connect ion is ready. Quickly: The connect ion is t raining.The phone connect ed t o t his port is of f -hook. The phone connect ed t o t his port is on-hook. A phone call comes. 2. 4G/ 5G: Wireless access point wit h bandwidt h of 2. 4GHz/ 5GHz is ready. WLAN: Wireless access point is ready. Wireless f unct ion is disabled. It will blink slowly while wireless t raf f ic goes t hrough. ACT and WLAN LEDs blink quickly and simult aneously when WPS is working, and will ret urn t o normal condit ion af t er t wo minut es. (You need t o set up WPS wit hin 2 minut es. )

WAN2 / P6Lef t LEDRight LED (2)LAN P1-P5Lef t LEDRight LED

On Of f Bl i nki ng On Of fOn Of f Bl i nki ng On Of f

No. Interface

Description

Wireless band will be swit ched / changed according t o t he

but t on pressed and released. For example,

2. 4G (On) and 5G (On) in def ault .

2. 4G (Of f ) and 5G (On) pressed and released t he

but t on once.

Wireless LAN 2. 4G (On) and 5G (Of f ) pressed and released t he

ON/ OFF/ WPS

but t on t wice.

(3)

2. 4G (Of f ) and 5G (Of f ) pressed and released t he

but t on t hree t imes.

When WPS f unct ion is enabled by web user int erf ace, press t his but t on f or more t han 2 seconds t o wait f or client ‘ s device making net work connect ion t hrough WPS.

Fact ory Reset

Rest ore t he def ault set t ings. Usage: Turn on t he rout er (ACT LED is blinking). Press t he hole and keep f or more t han

(4) USBWAN2 / P6 (5)LAN P1-P5 DSL (6) PWR (7) ON/ OFF

5 seconds. When you see t he ACT LED begins t o blink rapidly t han usual, release t he but t on. Then t he rout er will rest art wit h t he f act ory def ault conf igurat ion.Connect er f or a USB device (f or 3G/ 4G USB Modem or print er or t hermomet er).Connect er f or local net work devices or modem f or accessing Int ernet . It is a swit chable port . It can be used f or LAN connect ion or WAN connect ion according t o t he set t ings conf igured in WUI.Connect ers f or local net work devices.Connect er f or accessing t he Int ernet .Connect er f or inst alling WLAN ant ennas.Connect er f or a power adapt er.Power Swit ch.

3. Hardw are InstallationThis sect ion will guide you t o inst all t he rout er t hrough hardware connect ion and conf igure t he rout er’ s set t ings t hrough web browser. Bef ore st art ing t o conf igure t he rout er, you have t o connect your devices correct ly. (For t he hardware connect ion, we t ake ” ac” model as an example. )3.1 Netw ork Connection1. Connect t he DSL int erf ace t o t he land line j ack wit h a DSL line cable, or Connect t he cable Modem/ DSL Modem/ Media Convert er t o t he WAN port of rout er wit h Et hernet cable (RJ-45).2. Connect one end of an Et hernet cable (RJ-45) t o one of t he LAN port s of t he rout er and t he ot her end of t he cable (RJ-45) int o t he Et hernet port on your comput er.3. Connect one end of t he power adapt er t o t he rout er’ s power port on t he rear panel, and t he ot her side int o a wall out let .4. Power on t he device by pressing down t he power swit ch on t he rear panel. 5. The syst em st art s t o init iat e. Af t er complet ing t he syst em t est , t he ACT LEDwill light up and st art blinking. (For t he det ailed inf ormat ion of LED st at us, please ref er t o sect ion 2. Panel Explanat ion)9

3 .2 Wa ll-M ount e d I nst a lla t ionVigor rout er has keyhole t ype mount ing slot s on t he underside. 1. Drill t wo holes on t he wall. The dist ance bet ween t he holes shall be 168mm. 2. Fit screws int o t he wall using t he appropriat e t ype of wall plug.

Not e

The recommended drill diamet er shall be 6. 5mm (1/ 4″ ).

3. When you f inished about procedure, t he rout er has been mount ed on t he wall f irmly.

4. Softw are ConfigurationTo access Int ernet , pl ease f inish basic conf igurat ion af t er complet ing t he hardware inst allat ion.4.1 Quick Start Wizard for Netw ork ConnectionThe Quick Start Wizard is designed f or you t o easily set up your rout er f or Int ernet access. You can direct ly access t he Quick Start Wizard via Web User Int erf ace. Make sure your PC connect s t o t he rout er correct ly.

Not e

You may eit her simply set up your comput er t o get IP dynamically f rom t he rout er or set up t he IP address of t he comput er t o be t he same subnet as the default IP address of Vigor router 192. 168. 1. 1. For t he det ailed inf ormat ion, please ref er t o Trouble Shoot ing of t he user’ s guide.

Open a web browser on your PC and t ype http:/ / 192. 168. 1. 1. A pop-up window will open t o ask f or username and password. Please ent er ” admin/ admin” as t he Username/ Password and click Login.

Not e

If you f ail t o access t o t he web conf igurat ion, please go t o ” Trouble Shoot ing” on User’ s Guide f or det ect ing and solving your problem.

Now, t he Main Screen will pop up. Click Wizards>>Quick Start Wizard.

Not e

The home page will change slight ly in accordance wit h t he rout er you have. Here we t ake Vigor2866ac as an example.

If your rout er can be under an environment wit h high speed NAT, t he conf igurat ion provide here can help you t o deploy and use t he rout er quickl y. The f irst screen of Quick Start Wizard is ent ering login password. Af t er t yping t he password, please click Next.

On t he next page as shown bel ow, please select t he WAN int erf ace t hat you use. If DSL int erf ace is used, please choose WAN1; if Et hernet int erf ace is used, please choose WAN2; if wireless 2. 4G/ 5G connect ion is used, please choose WAN3 or WAN4; if 3G USB modem is used, please choose WAN5 or WAN6. Then12

click Next f or next st ep. Each WAN int erf ace will bring up specif ic conf igurat ion page. Here, we t ake WAN1 as an example.Click Next t o go t o t he f ollowing page. You have t o sel ect t he appropriat e Int ernet access t ype according to the information from your ISP. For example, you should select PPPoA mode if t he ISP provides you PPPoA int erf ace. In addit ion, t he f ield of For ADSL Only will be available only when ADSL is det ect ed. Then click Next f or next st ep.13

PPPoE/PPPoA 1. Choose WAN1 as WAN Int erf ace and click t he Next but t on; you will get t hef ollowing page.2. Af t er f inished t he above set t ings, simply click Next.14

3. Please manually ent er t he Username/ Password provided by your ISP. Then click Next f or viewing summary of such connect ion.4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, t he syst em st at us of t his prot ocol will be shown.5. Now, you can enj oy surf ing on t he Int ernet .15

MPoA / Static or Dynamic IP 1. Choose WAN1 as WAN Int erf ace and click t he Next but t on; you will get t hef ollowing page.2. Please t ype in t he IP address/ mask/ gat eway inf ormat ion originally provided by your ISP. Then click Next f or viewing summary of such connect ion.3. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, t he syst em st at us of t his prot ocol will be shown.4. Now, you can enj oy surf ing on t he Int ernet .16

report this ad

5. Customer ServiceIf t he rout er cannot work correct ly af t er t rying many ef f ort s, pl ease cont act your dealer f or f urt her help right away. For any quest ions, please f eel f ree t o send e-mail t o support @drayt ek. com.Be a Registered Ow nerWeb regist rat ion is pref erred. You can regist er your Vigor rout er via ht t ps: / / myvigor. drayt ek. com.Firmw are & Tools UpdatesDue t o t he cont inuous evolut ion of DrayTek t echnology, all rout ers will be regularly upgraded. Please consult t he DrayTek web sit e f or more inf ormat ion on newest f irmware, t ools and document s. ht t ps: / / www. drayt ek. com17

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-02-09

DrayTek

admin

Tags:

_pdf, 2865AX, DrayTek, VGY2865AX, Vigor2866 Series Wired G.Fast DSL and Ethernet Router