Drok Transistor Tester User Guide
Display Interface:
Parameters:
Voltage supply: DC 6F229V Layer-built Battery (NOT Included)Transistors range: 2 or less (including 2) P-N junction transistorResistors range: 0.5Ω – 50MΩCapacitors range: 25pF-100000uFInductors range: 0.01mH – 20HScreen: 1.8 inch TFT color LCD screenAuto shutdown time: 40 seconds longest (can be manually shutdown at any time)Auto shutdown countdown: When there are 5 seconds left, the fonts turn red and flash as a reminder.Dimensions: 70mm × 135mm × 24mm
Operating Instruction:
The pins of the electronic components can be connected to the 1,2,3 pin optionally.This multifunctional meter is automatic identification type, which can detect the pin sequence, graphic display and parameters automatically.
Eg. When testing a triode:
- Insert the triode into the testing interface optionally without considering about the BEC order of 1,2,3 pin.
- Press the testing button.
- The meter will identify if it is triode, field-effect tube, controlled silicon or resistance capacitance.
- The tester will detect if it is NPN or PNP and then detect the BCE order and other information.
Testing Range:
- Range of Transistor: transistor consisting of less than two (including two) PN nodes with no other resistors or capacitors inside.
- Range of Resistance Testing: 0.5Ω-50MΩ
- Range of Inductance Testing: 0.01mH-20H
- Range of Capacitance Testing: 25pf – 100000uF
Any questions please contact us through Amazon:
[xyz-ips snippet=”download-snippet”]