Dual XRM47BT AM/FM Receiver with Bluetooth Fixed Face Installation And Owners Maual

Dual® XRM47BT Installation/Owners Manual

AM/FM Receiver with Bluetooth / Fixed Face

Preparation

Please read entire manual before installation.

Before You Start

  • Disconnect negative battery terminal. Consult a qualified technician for instructions.
  • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Mounting the Head Unit:Typical DIN mounting

Step 1:

Insert the mounting sleeve into the installation kit or dashboard.

Step 2:

Bend multiple mounting tabs around the mounting sleeve until the mounting sleeve is secure.

Step 3:

Connect all wiring harnesses and slide the head unit into the mounting sleeve until it clicks into place.

Mounting the Head Unit:ISO mounting

Using the existing brackets or the brackets supplied with the installation kit, mount the brackets to the sides of the head unit with the screws supplied with the head unit.

Wiring Diagram

Control Locations

General Operation

Power On/OffPress the button to turn the unit on. Press again to turn the unit off.

Changing ModesPress MODE to select between Radio, USB, Auxiliary Input and Bluetooth. Modes of operation are shown in the display.

VolumeAdjust volume using the volume knob (00-43).

MutePress to silence the audio. Press again to resume listening at the previously selected volume.

Auxiliary InputsInsert a 3.5mm cable in the unit’s front AUX port.

ResetPress the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located on the front panel.

Setting the ClockWith the unit on, press DISP to display clock time. Press and hold DISP until the hours begins to flash, then release.Press the TUNE and TUNE to adjust the hours, then press the DISP, the minutes begins to flash, press the TUNE and TUNE button to adjust the minutes.Press DISP momentarily to save the selected time.

DisplayPress DISP to toggle display between various displayed information.

Audio / MenuPress the volume knob momentarily to select between audio functions.Press and hold the volume knob for more than two seconds to select between the menu functions.Rotate the volume knob left/right to adjust or activate the desired function/audio.

AM/FM Tuner Operation

Seek TuningPress TUNE or TUNE to seek to the previous or next strong station.

Manual TuningPress and hold TUNE or TUNE to enter manual tuning mode, then press TUNE or TUNE momentarily to change radio frequency up or down one step at a time. Press and hold TUNE or TUNE to advance quickly.

BandPress BAND to select between FM1, FM2, FM3, AM1 and AM2 bands. Up to six presets can be programmed for each band, enabling up to 18 FM stations and 12 AM stations to be stored in memory.

Storing PresetsUp to 18 FM and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button (1-6) for more than two seconds. When stored, the preset number will appear in the display.

Recalling PresetsPreset stations can be recalled any time by pressing the corresponding preset button.

Automatically StorePress and hold AS/PS for more than 2 seconds to store 18 FM stations and 12 AM stations automatically.

Preset Scan StationsPress AS/PS to recall each preset station that stored in the memories in each band.

USB Operation

Playing MP3 FilesTo play MP3 files, insert a USB device containing MP3 files.

Track SelectPress TUNE to skip to the beginning of the next track.Press TUNE to skip to the beginning of the previous track.

Fast Forward and ReversePress and hold TUNE or TUNE to fast forward or reverse a track.

PausePress to temporarily stop USB playback.Press again to resume playback.

Folder AccessFolders can be found by pressing Folder Up or Folder Down. About one second after the folder name is displayed, the first file under the selected folder will be displayed and playback will begin.

RepeatPress RPT to toggle between RPT ALL, RPT FLR and RPT ONE.

  • RPT ALL – Plays all tracks on USB device.
  • RPT ONE – Continuously repeats selected track.
  • RPT FLR – Continuously repeats all files in current folder.

RandomPress RDM to play tracks in random order; press again to cancel the RDM function.

IntroPress INT to play the first 10 seconds of each track; press again to cancel the INT function.

Bluetooth Operation

PreparationBefore using a Bluetooth device, it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process.

Pairing a New DeviceThe head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details.The device name is “Dual Media Player”.The Bluetooth passcode is “1234”.Note: The head unit can be in any mode of operation when pairing is performed.

Streaming Audio TroubleshootingThe head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit. The following functions can be used to control the music:

  • Press to skip to the next available audio track.
  • Press to skip to the previous audio track.
  • Press to toggle between play and pause during playback.

Troubleshooting

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Specifications

FM Tuner

Tuning range: 87.5MHz-107.9MHzUsable sensitivity: 8.5dBf50dB quieting sensitivity: 10dBfStereo separation @ 1kHz: >30dBFrequency response: 30Hz-13kHz

AM Tuner

Tuning range: 530kHz-1710kHzUsable sensitivity: <42dBuFrequency response: 30Hz-2.2kHz

General

Speaker output impedance: 4~8 ohmsLine output voltage: 2 Volts RMSDimensions: 7″ x 3.8″ x 2″ (178 x 97 x 50 mm)

Design and specifications subject to change without notice.

CEA-2006 Power Standard Specifications

(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)

Power Output: 16 Watts RMS x 4 channels at 4 ohms and < 1% THD+NSignal to Noise Ratio: 75dBA (reference: 1 watt into 4 ohms)

Dual XRM47BT AM/FM Receiver with Bluetooth Fixed Face Installation And Owners Maual – Dual XRM47BT AM/FM Receiver with Bluetooth Fixed Face Installation And Owners Maual –

[xyz-ips snippet=”download-snippet”]


Posted

in

by