Eachine TXC23 VTX User Manual

EACHINE TXC23 VTX5.8G ISM band simulation VTX

Product Instruction Manual

Product specifications

• Model: EACHINE TXC23 VTX
• Input voltage: DC 6-36V
• Output voltage: 5V/1A
• 12V/
• 12V//16dBm
• 12V//24.5dBm
• 12V//28dBm
• 12V//30dBm
• Antenna interface:MMCX
• Output power: PIT / 25mW / 200mW / 600mW / 800mW switchable
• Frequency: 5.8GHz 6 bands, 48 channels
• Size: VTX（28mm x 28mm x 1.6mm）
• Externai Expansion Board（36mm x 36mm x 1.6mm）

Product dimensions

1. Make sure the antenna is already installed at output before powering up, to avoid damaging the internal components.
2. Please note that the input voltage is within the specified range and wiring is correct, to avoid damaging the internal components.
3. Under high-power work, the temperature of VTX surface is high. No touching to avoid burning your fingers.

Power button settings

1. Click the button to switch power. The power of this VTX is switched and cycled in the order of PIT→25mw→200mw→600mw→800mw.
2. Press and hold the button for more than 2 seconds to switch directly to PIT from the current transmit power;

CH/FR button settings

1. Click the button to switch channels, and the channel switches and cycles in the order of CH1, CH2, CH3…CH8 on the basis of the current channel;
2. Press and hold the button for over 2 seconds , and the band switches and cycles in the order of A→B→E→F→R→L on the basis of the current band;

Eachine TXC23 VTX User Manual – Eachine TXC23 VTX User Manual –