earfun Air Pro 2 Hybrid ANC True Wireless Earbuds User Manual

EarFun Air Peo 2ANC Wireless Earbuds

BCUser Manual

What’s in the Box

Product Diagram

1. Touch control zone2. Charging contactor3. Charging case button4. Earbuds LED indicator5. USB-C charging port 6. Charging dock7. Microphone8. Charging case9. Charging case indicator

Charging

  1. Open or close the charging case to activate the LED battery indicator.
  2. Remove the insulating film on the charging case for the first time.
  3. Fully charge both the earbuds and the charging case before the first-time usage.
  4. Place earbuds back into the charging case and the earbuds will start charging.
  5. Fully dry off the earbuds and the USB port before charging.

•Connect USB cable for charging•Wireless charging (not included)

Specifications

Bluetooth version V5.2
Bluetooth frequency 2.402GHz-2.48GHz
Bluetooth transmitter power <6dBm
Bluetooth profile A2DP, AVRCP, HER HSP
Maximum working range 15m(without obstacles)
Battery capacity 45mAh x 2(earbuds); 500mAh(charging case)
Charging time

1 hour(for earbuds); 2 hours(for charging case via USB-C); 3.5 hours(for charging case via wireless charger)
Playtime

 ANC OFF–Up to 7 hours, Totally 34 hours with the charging case; (varies by volume level and audio content)ANC ON–Up to 6 hours, Totally 30 hours with the charging case; (varies by volume level and audio content)
Input DC 5V / lA
Dimensions 65mm x 52mm x 31.8mm
Weight 53g

How to Fit

Note: If the earbuds are not worn correctly, it may affect the noise-canceling effect.

  1. Choose the ear tips that fit your ears the best.
  2. Identify the left and right earbuds.
  3. Insert the earbuds into the canal of your ears
  4. Turn and find the most comfortable position.

Pairing Your Earbuds

  1. First-time Pairing with DeviceStep 1: Open the charging case, the earbuds will automatically power on and enter into pairing mode.Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices. |Step 3: Select “EarFun Air Pro 2” from the list of Bluetooth devices shown (if a password is needed, type ‘0000’).Notes:• The earbuds will automatically connect with the device they were last paired with when the case is open.• Each earbud could be used independently.
  2. Connect to a New DeviceOption AStep 1. Unpair the earbuds from the Bluetooth-enabled device that’s connected. The earbuds will disconnect from the current device and enter into pairing mode for another pair.Step2. Search on the new device and connect.Option BStep 1. Place both earbuds back into the charging case and make sure they are being charged, keep the cover open and then press and hold the charging case button for 2 seconds until the LED indicator on both earbuds flashes in blue rapidly.Step 2. Search on the new device and conned.

Functions

Power on/offOpen the charging case, the earbuds will automatically power on. Place the earbuds back into the charging case. Close the case and the earbuds will automatically power off.Notes:If the earbuds are not connected to any device, they will automatically power off after 10 minutes for saving the battery life.Playing Music

Play/Pause
Next track
Previous track
Volume up
Volume down

Hands-Free Conversation

Answer/End a call
Reject call
Answer and transfer two calls

Activate The Voice Assistant

Voice assistant

Noise Cancelling Control

Noise-cancelling/ Ambient sound/ Normal

Earbuds LED Indicator

Power on Blue indicator flashes 1 second
Power off The red indicator flashes 1 second
Pairing mode Indicator flashes blue
Successfully connected Indicator goes out
Factory reset Indicator flashes in purple

Reset and Reconnecting

If you fail to build a connection between two earbuds, or between earbuds and a Bluetooth device, please try the following steps:

  1. Place both earbuds into the charging case.
  2. Keep the charging case open, then press and hold the charging case button for at least 8s until both earbuds flash in purple, then earbuds have been reset successfully.
  3. Delete the old connection from the Bluetooth device and reconnect “EarFun Air Pro

Troubleshooting

Q: Can I use both earphones separately?A: Yes, each earbud could be used independently.Q: The earphones are turning on, but it doesn’t connect to my device?A: To connect the earbuds to your device, please check if the Bluetooth of the device is on at first, then select ‘EarFun Air Pro 2’ on the Bluetooth list to get paired. If the earbuds still can’t connect to your device, please try to reset it, or contact our customer support.Q: Why the connection is not stable and cuts out intermittently?A: Please make sure there are no objects between the earphones and your Bluetooth device, and make sure there is no radio or WIFI interference nearby.Q: What is the range of Bluetooth earphones?A: Bluetooth earphones have a maximum range of 49 feet (15m, no obstacle). However, the actual range will depend on usage and environment.Q: Is there volume control on the earphones?A: Yes, touch L earbud once decreases the volume, and touch R once could increase it.Q: My earphones will not switch on.A: Please recharge it and make sure it has enough battery power. If it is fully charged and still nothing happens or if you are not able to charge the unit, please contact our customer support for warranty cover.Q: Is the charging case waterproof?A: No, the earbuds are IPXS sweat & waterproof, but the charging case is not waterproof.Q: Will the earbuds shut off automatically?A: The earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once the audio is played. If the earbuds are not connected with any devices, they will automatically shut off in 10 minutes.

Customer Service

For FAQS and more informationPlease Email to: [email protected]www.myearfun.com

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,