Easythreed X1 3D Printer Installation Guide

Easythreed X1 3D PrinterInstall Manual

  • This manual is written in accordance with EasyThreed X1 3D printer
  • Printer upgrades and equipment models are slightly different, is a normal phenomenon, based on the actual products received.
  • User’s manual inside TF card.

Parts List: Take out parts from package, check if all parts have as listed below:

  1. Install the XZ Axis set to the Printer Base.
  2. After insert the XZ Axis, Fixed with 2 screws.
  3. Connect the Z-axis motor line to the output line of the printer control box as shown in the figure below.
  4. Install the Filament Holder as below.Important Notice：This filament holder can only hang on 250g weight filament.connect the power and start the 3D printing journey.

ShenZhen EasyThreed Technology CO.,LTDhttp://www.easythreed.com[email protected]

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,