EasyThreed X4 3D Printer Instruction Manual

EasyThreed X4 3D Printer

Parts List: Take out parts from package , check if all parts have as listed below。

  1. Install the XZ Axis set to the Printer Base.
  2. After insert the XZ Axis, Fixed with 2 screws.
  3. Connect the Z-axis motor line to the output line of the printer control box as shown in the figure below..
  4. Install the Filament Holder as below.Important Notice: This filament holder can only hang on 250g weight filament.connect the power and start the 3D printing journey.。

ShenZhen EasyThreed Technology CO.,LTDhttp://www.easythreed.com[email protected]

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,