Instruction Manual
CLEARANCES & INSTALLATION MANUAL BIOETHANOL ONLY
Please read these instructions and the Burner Operations Manual provided with your burner completely before operating the appliance.REFER TO THE OPERATIONS MANUAL IN THE BURNER PACKAGING FOR CLEARANCE AND INSTALLATION INSTRUCTIONS IF USING PROPANE OR NATURAL GAS.
e-NRG is the ONLY fuel to be used in this appliance.www.e-nrg.comwww.e-nrg.com.au
! WARNINGS:
NOTE: Weight is approx only. Weight includes burner, fire screen and black glass charcoal.
Fireplace Clearances
When using Bioethanol as a fuel source this model is suitable for indoor and outdoor use.Before installation ensure that the model is positioned in accordance with the compulsory minimum clearances outlined below.If used indoors ensure that you pay attention to the Minimum Room Sizes below:
| 1. Outdoor Clearances | 2. Indoor Clearances |
| AB8/ AB8(EN) | 116m³ [4096ft³] per burner |
| XL900 | 110m³ [3884ft³] per burner |
WARNING: Ensure that your fire is positioned away from flammable materials and other sources of ignition at all times. Pay very close attention to positioning the fire away from items that may move as a result of wind and drafts. For example trees/branches/paper and the like.
The base of the burner within the model must never come into direct contact with flammable materials.Side clearances to fixed and stable furniture items that are not susceptible to movement (e.g lounges or patio furniture) must remain a minimum of 600mm [23.6in] away from the flame at all times.
Overhead clearances to items that are susceptible to the movement (e.g. Trees) must remain a minimum of 2000mm [78.7in] away from the flame at all times.These products feature 360º height-adjustable articulating feet. Adjust the feet by turning them in either direction until you achieve a perfectly level and stable model before operating. Stainless steel will rust or corrode over time if contamination or debris is not cleaned or removed immediately. Always use the Burner Lid included with your model to avoid dust and debris from accumulating inside the burner.If you live in extreme weather conditions where the accumulation of snow is likely, use of the Winter Bag is imperative in order to be covered by the warranty.
Fireplace Installation
- Insert the metal tray into the base.
- For Indoor Installations insert the Indoor Safety Tray. The appliance must not be operated indoors without the Safety Tray installed.For outdoor installation go to Step 3.
- Insert Burner into the metal tray.
- 4. Insert Glass Screen. (If applicable).Align each glass screen tab with the designated slots in the metal tray, gently put into position. Exercise caution so as not to fracture or damage glass.If included as a standard part (compulsory in the USA), the appliance must not be operated without the glass screen installed.
- Add glass charcoal around the burner – be careful not to scratch the burner surface.Do not place glass charcoal on top of the burner or where they can interfere with the operation of the burner or the flame.
- These models come with Ground Fixing Brackets so they can be installed in a fixed position. Follow the instructions supplied with the Ground Fixing Brackets to complete the installation of the product.
OPERATE ACCORDING TO THE BURNER OPERATIONS MANUAL INCLUDED WITH THE BURNER.
MAD Design GroupShowrooms 3 & 4, 40-42 O’Riordan StreetAlexandria NSW 2015 AustraliaTel: +61 2 9997 3050 Email: [email protected]REV0920
References
[xyz-ips snippet=”download-snippet”]