ECOVACS Deebot N8 Pro Instruction Manual

ECOVACS Deebot N8 Pro

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical Appliance , basic precautions should always be followed, including the following:READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

  1. This Appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the Appliance in a safe way and understand the hazards involved. Children shall not play with the Appliance. Cleaning and user maintenance shall not be made by children without supervision.
  2. Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Appliance. Tuck rug fringe under the rug base, and lift items such as curtains and tablecloths off the floor.
  3. If there is a drop off in the cleaning area due to a step or stairs, you should operate the Appliance to ensure that it can detect the step without falling over the edge. It may become necessary to place a physical barrier at the edge to keep the unit from falling. Make sure the physical barrier is not a trip hazard.
  4. Only use as described in this manual. Only use attachments recommended or sold by the manufacturer.
  5. Please make sure your power supply source voltage matches the power voltage marked on the Docking Station.
  6. For INDOOR household use ONLY. Do not use the Appliance in outdoor, commercial or industrial environments.
  7. Use only the original rechargeable battery and Docking Station provided with the Appliance from the manufacturer. Non-rechargeable batteries are prohibited.
  8. Do not use without dust bin and/or filters in place.
  9. Do not operate the Appliance in an area where there are lit candles or fragile objects.
  10. Do not use in extremely hot or cold environments (below C/23°F or above 40°C/104)
  11. Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts.
  12. Do not operate the Appliance in a room where an infant or child is sleeping.
  13. Do not use Appliance on wet surfaces or surfaces with standing water.
  14. Do not allow the Appliance to pick up large objects like stones, large pieces of paper or any item that may clog the Appliance.
  15. Do not use Appliance to pick up flammable or combustible materials such as gasoline, printer or copier toner, or use in areas where they may be present.
  16. Do not use Appliance to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.
  17. Do not put objects into the suction intake. Do not use if the suction intake is blocked. Keep the intake clear of dust, lint, hair, or anything that may reduce air flow.
  18. Take care not to damage the power cord. Do not pull on or carry the Appliance or Docking Station by the power cord, use the power cord as a handle, close a door on the power cord, or pull power cord around sharp edges or corners. Do not run Appliance over the power cord. Keep power cord away from hot surfaces.
  19. If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
  20. Do not use the Docking Station if it is damaged. The power supply is not to be repaired and not to be used any longer if it is damaged or defective.
  21. Do not use with a damaged power cord or receptacle. Do not use the Appliance or Docking Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.
  22. Turn OFF the power switch before cleaning or maintaining the Appliance.
  23. The plug must be removed from the receptacle before cleaning or maintaining the Docking Station.
  24. Remove the Appliance from the Docking Station, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance.
  25. The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance.
  26. Please dispose of used batteries according to local laws and regulations.
  27. Do not incinerate the Appliance even if it is severely damaged. The batteries can explode in a fire.
  28. When not using the Docking Station for a long period of time, please unplug it.
  29. The Appliance must be used in accordance with the directions in this Instruction Manual. ECOVACS ROBOTICS cannot be held liable or responsible for any damages or injuries caused by improper use.
  30. The robot contains batteries that are only replaceable by skilled persons. To replace the robot’s battery, please contact Customer Service.
  31. If the robot will not be used for a long time, power OFF the robot for storage and unplug the Docking Station.
  32. WARNING: For the purposes of recharging the battery, only use the detachable supply unit CH1822 provided with the Appliance, or CH1918 sold separately as an accessory.

To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation.To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.To disable Wi-Fi module on DEEBOT, power the robot ON. Place the robot on the Docking Station making sure the Charging Contacts on DEEBOT and the Docking Station Pins make a connection.Press and hold the AUTO Mode Button on the robot for 20 seconds until DEEBOT emits 3 beeps.To enable Wi-Fi module on DEEBOT, power the robot OFF and then power ON. The Wi- Fi module is turned on when DEEBOT is restarted.

Correct Disposal of this ProductThis marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To recycle your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can safely recycle this product.

Package Contents

Note: Figures and illustrations are for reference only and may differ from actual product appearance.Product design and specifications are subject to changes without notice.

Product Diagram

Robot 

Bottom View

Docking Station

Reservoir

  1. Remove Protective Strips and Films
  2. Assemble Dockina Station
  3. Install Side Brushes

Charging DEEBOT

  1. Docking Station Placement 
  2. Power ON
  3. Charge DEEBOT Empty remaining water from the Reservoir and remove the Reservoir and the mopping pad p=late before charging DEEBOT.flashes when DEEBOT is charging.  goes out when DEEBOT is fully charged.You can also purchase an Auto-Empty Station that automatically empties your DEEBOT’s dustbin. Explore more accessories at https://www.ecovacs.com/global

ECOVACS HOME App

To enjoy all available features, it is recommended to control your DEEBOT via the ECOVACS HOME app.Before you start, make sure that:

  • Your mobile phone is connected to a Wi-Fi network.
  • The 2.4GHz band wireless signal is enabled on your router.
  • The Wi-Fi indicator light on DEEBOT is slowly flashing.

Tips: If you have any problems during the Wi-Fi setup process, refer to the Troubleshooting > Wi-Fi Connection section in this manual.

Operating DEEBOT

During the first cleaning, please supervise DEEBOT and assist it should there be a problem.

  1. Start
  2. PauseNote: The robot’s Control Panel stops glowing after the robot is paused for a few minutes. Press the AUTO Mode Button on DEEBOT to wake up the robot.
  3. Return to ChargePressing Button for 3 seconds to send DEEBOT back to the Docking Station.

OZMO Mopping System

  1. Note: To prolong the service life of the reservoir, it is recommended to use purified water or softened water for OZMO mopping system.
  2. Note: When DEEBOT is mopping, DEEBOT automatically detects the carpet and keeps away from it. If you need to clean the carpet, please uninstall the mopping pad plate first.

A multi-function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.Note: ECOVACS manufactures various replacement parts and fittings. Please contact Customer Service for more information on replacement parts.

OZMO Mopping system

Dust Bin and Filter

Main Brush

Side Brush

Other components

Troubleshooting

[xyz-ips snippet=”download-snippet”]


Posted

in

by