TWS200 PlusTrue Wireless Stereo Earbudswww.edifier.com
Product description and accessories
Note: Images are for illustrative purposes only and may differ from the actual product.
User guide
 |
● Charge the earbuds• You may hear a warning tone when at low battery level, please place the earbuds in the case for charging.● Charge the charging case• If the power indicator flashes six times rapidly when the case is opened, it indicates the case has a low battery capacity, please charge it in time.• Power indicator steady lit = chargingPower indicator off = fully charged● Battery level indicator on the charging case• When the charging case is opened/closed, the power indicator will show the case’s battery level;if flashes three times slowly: full battery level;if flashes twice slowly: medium battery level;if flashes once slowly: low battery level;if flashes six times rapidly: battery level is less than 10%• Power indicator (next to the charging port)Input: 5V 35mA(earbuds)5V 1A(charging case) |
Warning: The rechargeable batteries that provide power for this product must be disposed of properly for recycling. Do not dispose of batteries in a fire to prevent an explosion.
| ● Power on when thecase is opened.White light is lit for 1 seconds | ● Power oFF when thecase is closed. |
 |
|
| • Place the earbuds in the case, and double click the pairing button to enter Bluetooth pairing. | • Bluetooth pairing: red and white lights flash rapidly |
● Pairing  |
|
| • When not connected with any Bluetooth device, place the earbuds in the case, and press and hold the pairing button for around 10 seconds and release until the white light flashes rapidly, so as to enterTWS pairing mode and clear pairing records. | • TWS pairing: white light flashesrapidly When successful, white light is lit for 1 second, and then the redand while lights flash rapidly. |
 |
Search for and connect to “EDIFIER TWS200 Plus”, after pairing is successful, the white light of the charging case will flash twice per 5 seconds.
Functional operation
Accept/end a call: double click the left or right earbud
Pause/Play: double click the left or right earbud
Previous track: triple-click the left earbud
Next track: triple-click the right earbud
Note: Images are for illustrative purposes only and may differ from the actual product.
FAQsWhen charging the charging case, the indicator is off.
- Please ensure the charging case is correctly connected with the power source.
No sound
- Check if the earbuds are operating.
- Check if the earbud’s volume is at an appropriate level.
- Check if the earbuds are correctly connected to the mobile phone.
- Check if the earbuds are operating within a normal working range.The call quality of the earbuds is not good.
- Check if the mobile phone is in an area with a strong signal.
- Please ensure the earbuds are within an effective distance (10m) and noobstacle between the earbuds and mobile phone.
When playing music, cannot control pause/play/previous track/next track via the earbuds.
- Please ensure the paired device support AVRCP (Audio Video RemoteControl Profile) profile.
Maintenance
- Do not use a fast charger to charge the product to avoid affecting the service life of the battery.
- If not used for long periods of time, please charge the product with a lithium battery every three months.
- Keep the product away from humid places to avoid affecting the internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
- Do not put the product in places exposed to the sun or with high temperatures. The high temperature will shorten the service life of electronic components, damage the battery, and make plastic components deformed.
- Do not put the product in cold places to avoid damaging the internal circuit board.
- Do not dismantle the product. Non-professional personnel may damage the product.
- Do not drop, strongly vibrate, strike the product with a hard object to avoid damaging the internal circuit.
- Do not use drastic chemicals or cleaner to clean the product.
- Do not use sharp objects to scratch the product surface to avoid damaging the shell and affecting the facade.
Model: EDF200018Edifier International Limited P.O. Box 6264 General Post Office Hong Kongwww.edifyier.com 2020 Edifier International Limited. All rights reserved.Printed in ChinaNOTICE: For the need of technical improvement and system upgrade, the information contained herein may be subject to change from time to time without prior notice.Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.
References
[xyz-ips snippet=”download-snippet”]