EDIFIER Wireless Sports Headphones User ManualW200BT SE
Product Description and Accessories
Wire clipUSB charging cableEar support x 3 pairsEarmuffs x 3 pairs
There are different size of earmuffs attached in the package, please select the suitable ones to wear.
Operational Guide
ChargingDuring using, if only red light flashes, it indicates the headphone is atlow battery level, please use it after fully charged.Red light steady lit = charging red light off =fully chargedCharging time: about 1.5 hours for a full chargingWarning: The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion.
Power ON/OFFPower on: press and hold for 3 secondsPower off: press and hold for 3 seconds
Bluetooth Pairing
When turned off, press and hold the multifunctional button for 5 seconds to turn the headphone on, wait until red and blue light flashes alternately, then the headphone enters pairing state;
Set the mobile phone to search for and connect to “EDIFIER W200BT SE”, after pairing is successful, blue light will flash slowly.Press and hold for 5 seconds to turn the headphone on, wait until red and blue light flashes alternately, entering pairing state;
Connect Two Bluetooth Devices Simultaneously
Pair the headphone with the first device;
Restart the headphone; press and hold the multifunctional button for 5 seconds to let it enter pairing state and pair with the second device;
Operate the first device to pair with the headphone again, then it is successfully connected with two devices simultaneously.
Functional Operation Instructions
Music playback
Calling
Clear pairing records: when powered on and not connected, press and hold the “+” and “-” buttons simultaneously for 5 seconds, wait until blue light flashes rapidly, then the pairing records have been cleared.
FAQs
Red light instead of blue light flashes.
The headphone is at low battery level, please recharge the headphone.
Red light is o during charging.
Please ensure the charging device is correctly connected with the headphone.
When the headphone is not used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the red light will be lit.
No sound
Check if the headphone is operating.
Check if the headphone volume is at an appropriate level.
Check if the headphone is correctly connected with mobile phone.
Check if the headphone is operating within a normal working range.
Call effect of the headphone is bad.
Check if mobile phone is in an area with strong signal.
Please ensure the headphone is within effective distance (10m) and no obstacle between the headphone and mobile phone.
When playing music, cannot control pause/play/previous track/next track via headphone.
Please ensure the paired device support AVRCP (Audio/VideoRemote Control Prole) prole.
Maintenance
During using, please read the following suggestions carefully.
Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and deform plastic components.
Do not put the product in cold places to avoid damaging internal circuit board.
Do not dismantle the product. Non-professional personnel may damage the product.
Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
Do not use drastic chemicals or cleaner to clean the product.
Do not use sharp objects to scratch product surface to avoid damaging shell and affecting looking.
If the product cannot operate properly, please send it to your qualified maintenance agency.
EDIFIER International Limited www.edifier.com2019 Edifier International Limited. All rights reserved.Printed in China
NOTICE:For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications.Pictures and illustrations shown on this manual may be slightly different from actual product.Picture for reference only, actual product prevails.