EINOVA Dual Marble/ Travertine/ Lava Stone 10W Wireless Fast Charger User Manual

Table of Contents

EINOVA Dual Marble/ Travertine/ Lava Stone 10W Wireless Fast Charger User Manual

Package content

Dual Wireless Charging Stone (integrated 90 cm | 3 ft cable)
Power adapter
User Manual.

Product overview

Thank you for choosing Einova Dual Wireless Charging Stone. The Dual Wireless Charging Stone lets you enjoy the simplicity and convenience of fast 10W wireless charging while enhancing your home or office with elegant natural marble, travertine, lava stone, or sandstone. The two fast wireless charging spots are compatible with all Qi-enabled devices. Please read the user manual before using the product.

Instructions

Connect the Dual Wireless Charging Stone’s integrated cable to the DC connector of the included power adapter, then plug the power adapter into a power outlet.
Place your Qi-enabled device on one the one of the Dual Wireless Charging Stone’s Qi spots to begin wireless charging.

Smartphone positioning

The Dual Wireless Charging Stone features advanced electronic optimization to make smartphone positioning easier.Adjust the smartphone’s position to ensure proper alignment with the charging coil in the center of the pad. Direct contact is required for wireless charging.

Specifications

DUAL WIRELESS CHARGING STONE

Dimensions: 19,5 x 2 x 10 cm (7.67 x 0.78 x 3.93 in)
Input: 12V 2A
Wireless output: 5W, 7.5W, 10W X2 fast charge
Coil: 2 coils, charging two devices at the same time
Color: white, black, gold honey, grey, cream
Finish: genuine marble, travertine, lava stone, sandstone
Integrated cable: 45 cm (1.5 ft).
POWER ADAPTER Input 100-240V 0.8A AC
Output: 12V 2A DC
Integrated cable: 90 cm (3 ft)
DC jack: 5.5 x 1.7.

Note: technical specifications indicated here may be subject to change without notice in order to improve product performance.

Troubleshooting

If the product is not working properly please first check the troubleshooting guide below. If your situation differs from normal conditions, please try to solve the issue or call customer service at 44 (808) 178 7288 Mon-Fri 9am-5pm (GMT).For full troubleshooting visit our website: www.einova.com/support/troubleshooting

Does the power outlet work? (normal conditions: yes)
Are you using the provided power adapter? (normal conditions: yes)
Try charging your smartphone directly with the power adapter using your cable. Does it work? (normal conditions: yes)
Is the cable correctly attached to the adapter? (normal conditions: yes)
Has the Dual Wireless Charging Stone been dropped or damaged? (normal conditions: no)
Is your smartphone officially compatible with Qi wireless charging or equipped with a working Qi receiver? (normal conditions: yes)
Is the smartphone correctly aligned with the coil position of the Dual Wireless Charging Stone (as shown in the relevant section of the manual)? (normal conditions: yes)
Is there any metal between your smartphone and the charger? (normal conditions: no)

Safety information

Please read this safety information carefully before using the product to prevent injury to yourself or others and damage to your device.
Please keep this manual for future reference.
Do not damage the charging cable. Doing so may cause electric shock or fire.
Keep the product away from hot surfaces and sharp corners.
Do not carry or drag the product by the cable.
Do not use the product if one or more of its components are damaged or defective.
The product contains electronic parts. Keep your device dry. Humidity and liquids may damage the electronic circuits of the device and may cause electric shock and fire.
Do not place metal objects on the wireless charger, as it may overheat and cause a fire.
Do not place any other object between the smartphone and the wireless charger.
Do not place an unplugged receiver on the wireless charger, as this can overheat the product and cause a fire.
Handle the charger with care. Do not drop your device. It may get damaged or may malfunction.
Do not disassemble, modify, or repair your charger. Any alteration or modification of your device may void the manufacturer’s warranty. If your device needs servicing, contact the manufacturer.
Do not modify the product in any way. Any modification may increase the risk of injury.
Do not bite or suck on the device. Doing so may damage the device or result in an explosion or fire.
Children may choke on small parts. If children use the device, make sure that they use it properly.
If you notice strange smells or smoke coming from your device, stop using it immediately. Continuing to use the device may result in fire or explosion.
In the event of a cell leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with water and seek medical advice.
Do not use the device for anything other than its intended use. The device may malfunction or may cause an electric shock or fire.
Do not leave a battery on prolonged charge when not in use.
Never dispose of the device in a fire.
Avoid exposing your device to very cold or very hot temperatures.
Extreme temperatures may damage the charger and reduce the lifespan of the device.
Do not throw away the product with the household trash. The product needs to be recycled and disposed of responsibly.

Limited warranty

For product warranty visit our website at the page www.einova.com/support/download-area.This product is meant for use only with appropriate devices. Please consult your device packaging to determine whether this product is compatible with your particular device. Manufacturer will not be responsible for any damages you or any third party that may suffer as a result of use, intended or unintended, or misuse of this product. You agree to indemnify Manufacturer for any resulting injury or damage if the product is used with an unintended device. Product names, logos, brands and other trademarks referred to within this product are property of their respective trademark holders. These trademark holders are not affiliated with our company, our products or our website. They do not sponsor or endorse our materials.

This device complies with Part 15 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.