Electrolux Dimension Built-in ovens under bench Instruction Manual
| Pyrolytic cut-out dimensions | ||||
| Type of fit |
A (width) |
B (height) |
C (height) |
D* |
| Flush fit (mm) |
600 |
600 |
581min. |
20 |
Please note! Dimensions to be used as a guide only. All customers MUST refer to the user manual supplied with the product for detailed installation instructions.
- D – DimensionFor proper ventilation there must be a gap at the bottom rear of the cabinet. This can be a slot 20mm deep or an equivalent, full width opening (e.g. a series of holes) with a min area of 120cm2 . The opening must be clear of the product when fully installed. This is a requirement any EVEPxxxxx model. Power point connection for the EVEP618 must be accessible with the appliance fully installed. If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
[xyz-ips snippet=”download-snippet”]